Some of the maddest welding I've ever seen 🤣 And you know it's gonna be good when you have to hold the vice still 😂😳

@OutdoorGoodGuy

Жыл бұрын

Yes, i know. I've never welded before. :)

Nice build, Good job. I'd like the ammo Box. The video was a little too long for me, but I watched it all! It should be no more than 8 to 10 minutes!

@OutdoorGoodGuy

Ай бұрын

Hi Dan, thank you for watching and for your feedback. Cheers :)

BRAVO MAJSTORE

Good job. May have to try that myself.

@OutdoorGoodGuy

5 ай бұрын

That's great! Please show us yours when you've done it! 😉

Bonjour merci pour votre belle vidéo, je recherche le nom des tubes qui s'emboitent afin de faire une cheminée. Pourriez-vous m'aider svp ? Merci d'avance et bonne continuation.

i like the design

@OutdoorGoodGuy

Жыл бұрын

Thank you Augusto !

I keep a back up charge controller on hand and I also use the same diesel heater for emergency heat. I did install a Y splitter below the main internal tank with an auxiliary 20L tank that I use for long burn time. It takes roughly and hour to do the install with a few hot coffee breaks. I run 800 watts of solar panels and 4 100 ah LiPo batteries that I keep inside in a fireproof box. The house is wired for solar backup on critical items and not the HVAC, water heaters or stoves as I have propane tankless water heaters as back up along with various camp cooking system. All of this is actually my third back up as installed a 22kw Generac standby generator and a 500 gallon propane tank 5 years ago. If I get to a truly off grid life style… we can manage. Good tips on you cabin… so many people are not ready if things go south.

one of those in small tent and you can survive nearly all temps below zero ;) . nicely done.

@OutdoorGoodGuy

Жыл бұрын

Yes definitely, I've tested it myself several times below zero outside. And I am still alive to write this comment :D Thank you bro! :)

Interesting, you could of used the flap disc to safely remove the burrs off the metal, vs risking a stone or disc explode from using the side. At this point I'll say, you have an interesting model

Nice! Well done mister!

@OutdoorGoodGuy

3 жыл бұрын

Thank you Michel. Appreciate that! :)

This looks good though being lazy i would leave the paint on then when finished light a fire outside first and it burns right off

@OutdoorGoodGuy

Жыл бұрын

I do the same now, let the fire does its job :)

Siêu thế, còn tự biết làm lò sưởi kết hợp bếp nấu ăn nữa!

@OutdoorGoodGuy

3 жыл бұрын

Hi cảm ơn chị, thấy trên mạng bán giá rất cao, em tự làm một cái vừa rẻ vừa vui :)

Very nice

Why not clamp your sheet metal in the vise while drilling?

@OutdoorGoodGuy

2 жыл бұрын

It's a good idea. Thank you for your suggestion! :)

@woodsinme

7 ай бұрын

@shawndoyle6460 Step one; "Secure your work". Stock, whatever. He got it done with what he had but I may have had a couple of those moments, too. Rooting for him but thinking man that is gonna hurt! But he did it and shared it with us and we are commenting on it. Pretty awesome.

Very nice build. I think you should have nested the chimney the other way though. Having the female ends on the bottom allows the the tar build up to run down back into the stove instead of running down the pipe.

@OutdoorGoodGuy

2 жыл бұрын

Hi Jon, thank you for watching my video. And thank you for your suggestion :)

Hi guys, leave your comments here if you have any question about making your own stove from ammo box, i am here to help 😊

@eltelboy8492

Жыл бұрын

What is it your using to insulate the lid?

@PlayingWithFireOutdoors

8 ай бұрын

@@eltelboy8492 go to the hardware store, ask for stove rope and high temp Silicone

One of the best I've seen, clever solution for the legs. I would have added a plate on the top to avoid flames flow directly through the chimney. Thanks for the video

@OutdoorGoodGuy

2 жыл бұрын

Thank you Dani for watching. Why do you think that adding a plate on the top can help avoid flames flow directly through the chimney ? :)

@danimp321

2 жыл бұрын

@@OutdoorGoodGuy I guess it will add some flow restrictions and will deflect heat to the walls, I've seen it on other designs as well as on home stoves. But anyway, no doubt your design is good as it is

@marko7969

Жыл бұрын

Yes a baffle

I've built several Rocket Stoves, but never used an ammo container. Great Idea!

nice option material goog joob browww

@OutdoorGoodGuy

2 жыл бұрын

Hi Kelana, thank you bro ! :)

Looks great. Where did you find that pipe?

@OutdoorGoodGuy

3 жыл бұрын

Thank you 😊! Which country do you live? Try to find 50mm steel pipes on the Internet

Excellent!!! What is the chimney diameter?

@OutdoorGoodGuy

5 ай бұрын

It's 50mm wide 😊

Hi, what's the burn time on it if you turn the dampner down?

@OutdoorGoodGuy

5 ай бұрын

It can last for 2 hours, depend on wood type

Hello bro from turkey. I have question. What size your ammo box. See you

@50shadesof_odg

2 жыл бұрын

50 cal

awsome job I really dig the legs. about how long did it take to get your food cooked? also what type of hammer are you using I dig that size and shape

I'd have left the handle on.

@OutdoorGoodGuy

Жыл бұрын

It can be made this way, but no handle would be easier to for cooking.

Waste of a good can. What you can't smell is the heavy enamel paint burning off every time you light a fire in it, and it never goes away.

🤦🏼‍♂️