Why did you get a new regulator and manifold ? The double ended duotight connectors go on barbs and you can get ball connectors with duotight fittings moulde in from kegland , could've saved a lol of money there !

Like the duo tight kg coupler connectors, they're a nice touch.

Nice product. That connector looks very easy to use.

I think I will be converting my draft system over to this.

Very nice! A couple of connections there I didn’t know about and wish I had selected when creating my own. I just use a regular 90 elbow with a shorty piece of line in my shank, didn’t know those elbows existed. I’m might have to place another order for more goodies! I will say if you are going the route of Duotight, spend the extra dollar or two for the Duotight QDs. Less connection points for less chances of leak.

I think that might have to become my next project if not the next-2-next!!! Love it

@MoreBeer_

Жыл бұрын

Cheers Joe! 🍻

I will be building a keezer soon. I'll consider these as a method .

@MoreBeer_

Жыл бұрын

🙌🍻

Great video! I just got my first kegorator. it's used so I want to redo all the hosing, etc. I will be using this vid as a guide and getting all the duotight stuff. I am extremely new at kegging, but everything I've seen on cleaning beer lines talk about backflushing cleaner in place with pumps etc. I'm assuming with how easy these go in and out of the duotights, that I should be able to just take the lines out and clean them without that hassle and just use Beer Line Cleaner and then Starsan in a side bucket? Thanks!

You had screw on jubilee clamps, so there is no need to cut lines. Just unscrew clamp !

I guess for initial build, this system is great. I just clean my lines after I empty the keg, you know, don't be lazy!

okay so to do a gas line from the regulator to ball lock I would need 8mm duotight stuff and a check valve. Im a little confused lol.

The EVA 4mm tubing as you can cut down the beer line length.

Do you use ptfe tape between the flared manifold ball valves and the plastic duotight thread to push connectors? hanks

What length of line and what is your new serving PSI?

Do you have a kegerator or keezer that you built!? We want to hear about it! 🤘😎 List of all products featured in this video 👇 KOMOS DRAFT EQUIPMENT 🍻 KOMOS® Aluminum Gas Manifold - 1/4 in. Flare ➡ www.morebeer.com/products/komos-aluminum-gas-manifold-14-flare.html KOMOS® Premium Dual Gauge CO2 Regulator ➡ www.morebeer.com/products/komos-dual-gauge-co2-regulator.html KOMOS® Stainless Steel D-Style Keg Coupler with Ball Lock Quick Disconnect (QD) Adapters ➡ www.morebeer.com/products/komos-keg-coupler-style-sanke-prv-stainless-ball-lock-adapters.html DUOTIGHT FITTINGS🔒 Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare ➡ www.morebeer.com/products/duotight-pushin-fitting-8-mm-516-14-flare.html Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread ➡ www.morebeer.com/products/duotight-pushin-fitting-8-mm-516-58-fpt.html Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow ➡ www.morebeer.com/products/duotight-8mm-516-male-elbow.html Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve ➡ www.morebeer.com/products/duotight-pushin-fitting-8-mm-516-check-valve.html EVABARRIER TUBING 👏 EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD ➡ www.morebeer.com/products/eva-barrier-double-wall-tubing-532-4-mm-id-516-8-od-placeholder.html MULTI-FUNCTIONAL 🔥 Tube Cutter - 2-in-1 with Duotight Removal Tool ➡ www.morebeer.com/products/tube-cutter-2-1-duotight-removal-tool.html Beer Line Tidy - Beer and Gas Line Organizer ➡ www.morebeer.com/products/beer-line-tidy-gas-organizer.html

@Stevejohnson-od3mk

Жыл бұрын

I used the EVA Barrier 8MM hose & every Duotight fitting shown in this video. Instead of the KOMOS manifold on my 4 keg kegerator, I installed the Kegland secondary regulators. Now I can adjust each keg pressure to my liking. I also swapped the analog gauges for the digital gauges on the regulators. Easy to swap out and with the back lighting it is very easy to read.

I'm wanting to build a keezer. What's the best way to clean your line's, and how much beer is in one of those kegs?

Re check valves, you said the shut off valves on the manifold already had check valves. How about putting the check valves at the quick connects to completely prevent beer from backing up into gas lines at all?

@freshplasticup5795

3 ай бұрын

This.

Do you offer all of this as a kit so one doesn’t need to search for all the parts?

@MoreBeer_

Жыл бұрын

We do not offer this as a kit because it was built to the specs of Patrick’s Keezer, but all the parts are included with links in the video description!

Nice video. But it always shocks me to see Duotight content not covering the major aspects of how they work so you don’t run into a leak. 1. Make sure the Evabarrier tubing is cut at a flush 90 degree angle. 2. Push the tubing ALL THE WAY into the Duotight fitting. It has “two clicks”. Also, a little StarSan helps them push in easier. No need for KegLube here. 3. When connecting threaded Duotight fittings to any threads, hand tighten and then give it a quarter to half turn with a wrench. No more than that or the Duotight could crack. ALSO, no thread tape is required in this installation. I really wish Kegland would address the importance of these aspects with this system in their videos or included with these items. I LOVE mine and have had no problems because I understand how to use them. However, there has to be some documentation on how to use them properly. The amount of people I see online who run into leaking problems and swear them off is astonishing, simple because they’re not using them the right way.

@RAD6150

6 ай бұрын

Thanks for the heads up... been struggling with getting the gas lines fully seated - seem to need more force than I can easily apply. Will do a little starsan.

Kind of still looks like the original rats nest of lines. Sorry.

@TheWtikaiser

2 ай бұрын

His lines are way too long. One of the big selling points is the smaller diameter needs less length. Most of my lines are under 3 feet and work well.

Very confusing looking.

Sounds like you're making excuses to change it out. Literally the same shit. You hardly change lines.