DIY INDUSTRIAL MIRROR | WALL MIRROR IKEA HACK 2020 *LOWBUDGET*

Тәжірибелік нұсқаулар және стиль

Building a industrial style grid mirror for & with SO , as seen on tiktok and other platforms.
The best ikea hack 2020.
Unfortunately i forgot to add the paint and the mounting hardware in my calculations, sorry :) .
So you have to add another 13€ to the sum.
The mirror was build in one afternoon, so definetly a short and sweet weekend project.
music used:
------------------------------
Found You - Atch / atch-music
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/_found-you
Music promoted by Audio Library • Found You - Atch (No C...
------------------------------
------------------------------
Intención by Sapajou / sapajoubeats
Creative Commons - Attribution 3.0 Unported - CC BY 3.0
Free Download / Stream: bit.ly/-intencion
Music promoted by Audio Library • Intención - Sapajou (N...
------------------------------ if you want to support the channel, you can buy me a coffe:
ko-fi.com/christophlehner
Thank you very much !!!
*affiliate links:
my camera: amzn.to/3Ef7ObP
my lens: amzn.to/3fG1sYY
my mic: amzn.to/3rtPSTi
or you can also support me through paypal:
Paypal Me: paypal.me/clehn8ok

Пікірлер: 12

@emilydicksonappleseed2 жыл бұрын
Yours is the only one that addresses a nice finished edge. The edge is critical! Thank you.
@lee48lee682 жыл бұрын
This is beautiful! I had a 5’X11’ mirrored wall built for my home and I love it!
@mani92923 жыл бұрын
Hammer Video!! Freu mich schon auf mehr !!! :)
@mariajosemanganaro3 жыл бұрын
Very good, perfect execution! extremely clear explanations👏👏👏
@ChristophLehner
3 жыл бұрын
Thank you ☺️
@patriciahammer62313 жыл бұрын
I love it!!!
@sandraturizogutierrez68202 жыл бұрын
Hermosísimo Dios. Te bendiga mucho por tu talento
@sophielehner99573 жыл бұрын
nice 🤩
@esmayuzgec79312 жыл бұрын
Looks amazing! How thick is the mdf board you used?
@ChristophLehner
2 жыл бұрын
16mm
@oppugnator3 жыл бұрын
Richtig geiler scheiß...war das eig geplant, zuerst zu streichen, und dann wieder spachteln, und wieder streichen? Oder kann ich das iwie hesser machen? Ahja und eine frage hab ich noch...was tun wenn ich keine kreissäge/ nagelpistole hab...beste alternativen?
@ChristophLehner
3 жыл бұрын
streichen spachteln streichen - this is the way --> du musst die Leisten streichen, bevor du sie montierst, sonst siehst du im Spiegel die ungestrichene Rückseite.... Kreissäge --> Handsäge mit Winkellehre & viel Geduld bzgl. den L-förmigen Profilen --> hätte man auch als Rechtecksleiste direkt montieren können. Nagelpistole --> Hammer mit Stiftnägel und einen blauen Daumennagel :)