I've watched tons of haltech videos, this one is pretty well explained for the shear magnitude of how complex tuning is
@edvas02271 Жыл бұрын
We definitely need more haltech videos. I didn't know how to upload the basemap. For b series the s300 is pretty straightforward, nsp software takes some getting used to.
@mth3032 жыл бұрын
Definitely make more of these videos. I would love to see how to run coil on plug using the distributor trigger and the Halltec 550. Liked, subscribed, and will DEFINITELY be buying from humble for all my race car needs.
@BigManBrock2 жыл бұрын
Super helpful for someone like me that's just looking to start playing with tuning their car on a new ecu. Appreciate ail thre rambling and thoughts put into the video. Was totally worth watching. Keep up the great videos man.
@Sporkracing2 жыл бұрын
Another great DIY video, can't wait to get my ecu. I did buy from humble and they were easy to work with, answered my many questions
@daveroy99062 жыл бұрын
Awesome basic start up parameter info thank you Kenny very helpful👍
@DarksideLilWoady2 жыл бұрын
Tons of info on this vid , I appreciate you Kenny , keep the content coming 💪🏽🙏🏽🏎💨🔥
@chicagovasko2 жыл бұрын
Glad to hear you brother. You sound healthy. Very cool.
@EvanLB2 жыл бұрын
This awesome! Nice work
@masongiles84435 ай бұрын
Thank you for the information! Hope to be installing a haltech 750 in my 91 accord to start off my build
@alexkinnane5831 Жыл бұрын
Thanks heaps! This information is invaluable!
@julioi9152 жыл бұрын
Awesome video
@csskid18382 жыл бұрын
great vid!!!!
@AdinSLaboy Жыл бұрын
Bro u kill the blog bro this its such off great inf this its the second time I see it ❤
@Mcdonaldt0012 ай бұрын
Thanks Kenny!
@nathank91132 жыл бұрын
Thanks for the video. Can you run a B-series VTEC control and ignition maps with the Elite 550?
@Reaper_19942 жыл бұрын
You can use the NSP software to tune the Elite series now! Get onto it. The load times and additional features are worth the change.
@BourneThisWay Жыл бұрын
In my R32, I can’t get it to idle at 14.7 no matter what I do. Currently, the target is set to 12.8. Anything above that and it starts misfiring violently. I verified all engine, TDC, sensor and injector settings were correct and I can’t get a stable idle at 14.7. I’ve accepted that 12.8 is what the engine likes and that’s where I’ll keep it until I figure it out somehow or take it to a specialist. I’m thinking it could be because of either the Idle Control or O2 Control PID settings.
@ammonhansen64592 жыл бұрын
Kenny how well will this work with vtech e? With gas prices I’m trying to come up with some options.
@stinky155522 жыл бұрын
Awesome can you make more videos like this maybe do Hondata Kpro one for basic tweaks of base map and things to change for guys with kswapped cars
@juancarlosruiz19852 жыл бұрын
How is the setup for a j32?
@MichiganTrailRider7 ай бұрын
@humbleperformance Care to share oem distributor settings I can’t get the Oem distributor to work getting home sync trigger count error . Car runs fine on the Hondata. Tried the settings in the video with no luck .
@danielhaynes1642 Жыл бұрын
Love the video it was great. The main thing I would change/mention comes from when you set up the engine cc. Don't just put 1800, 2000, 2200 etc. Make a habit of taking and multiplying your bore x stroke. Doing this will give you the exact cc which is never just straight 1800 etc. Will also help with setting up engines that have been bored (IE a gsr that's 84.5mm Instead of stock bore) or engines that have been stroked/destroked.
@humbleperformance
Жыл бұрын
It doesn’t matter that much.
@davidargaman2 ай бұрын
How did you wired the VTC cam sensor ?, there is only 1 cam input on Elite 550.
@badgermetal2 жыл бұрын
I'm currently running my d15b7 with d16z6 head on a stock p06 without vtec. I just need to wire it and tune it. Im thinking about getting the elite 550 diy pin kit from you guys. Do you guys have a basemap for high compression NA d15? If not could I use a tune for a very similar engine setup like the d16 and correct the displacement? Then use closed loop learning to learn how to make changes? I don't really want to pay someone for a dyno tune, I want to learn how to tune it myself NA first before going boosted. I want to do low compression piston/rod/turbo setup down the road but for now I just want vtec working and a proper tune/ecu.
@barryshaft20038 ай бұрын
Can you make a basic set up video for kseries like 05-06 DC5 with the Platinum Pro?
@jeyanthitherce72742 жыл бұрын
Thanks sir training KZread channel
@CostaDoinBusiness2 жыл бұрын
i need this for ktuner
@user-hh4hc2lt6e2 жыл бұрын
So i can’t use it on my stock k24a2 tsx? I’d like to easily convert to cable throttle.. New ecu is 500-700.. might as well go haltech if i can use the elite 550 …
@driftnate8532 жыл бұрын
Cool video! But at around 21 minutes when talking about injector flow at given pressure, your not making it clear that its about pressure Differential. It the engine is boosting 1 bar, and the fuel base pressure is constant at lets say 3 bar, the effective flow rate of fuel is given at the pressure differential, in this example 2 bar. Most fuel systems work with a 1:1 fuel pressure regulator, meaning it targets the same pressure differential truthout the operation of the engine ainming easier and more predictable tuning. So now tith a 1:1 fpr, if base fuel pressure is 3 bar and the engine is making 1 bar of boost, the fuel line will be at 4 bar, retaining the 3 bar pressure differential seen by the injectors, hence having the same flowrate.
@backyardbuilt40182 жыл бұрын
🔥🔥💯💯
@Potluck_Brewing2 жыл бұрын
How would you go about setting up COP using the sensor in the distributor?
@humbleperformance
2 жыл бұрын
You can do that no problem.
@underestimatedgarage2 жыл бұрын
does this only work for k series or any honda ? i have a p28 ecu right now but im goimg to build my d series new to the honda a friend recommend me to this video and haltech 550.
@underestimatedgarage
2 жыл бұрын
@Dr. Mantis Toboggan i can save up for it im just wanna be able to do it right im already spending to build why not get a software that can benefit as well right?
@underestimatedgarage
2 жыл бұрын
@Dr. Mantis Toboggan thats true man, honestly i going k series one day all motor awd
@CraaaigV3022 жыл бұрын
I'm now saving up to order a 550 from u guys instead of a s300 because the cost of a s300 in a obd1 ecu is crazy people want gold for a chipped ecu
@t.j28812 жыл бұрын
Can the 550 do Alpha N?
@humbleperformance
2 жыл бұрын
Yes
@EliteBullys232 жыл бұрын
For coils u still run the the hondata coil retrofit with the haltech
@humbleperformance
2 жыл бұрын
You wire the coils up individually. No box needed
@puffy_performance
2 жыл бұрын
R u going to do a video on how to wire up coil on plug
@hyper85452 жыл бұрын
Don't these ecu self tune over time? Or is that only a holley thing
@BoostedNW
6 ай бұрын
They do
@hyper8545
6 ай бұрын
@@BoostedNW 2 years xD
@BoostedNW
6 ай бұрын
@@hyper8545 Yeep, figured im sure you don't need to know, but others in the future might.
@boyflexnv2 жыл бұрын
Nice! And I haven’t even watched The Who video
@boyflexnv
2 жыл бұрын
Okay finished the video, I don’t even own an H series but it was a bunch of basics to look out for! Will definitely buy turbo kit for my RSX from you guys when the time comes.
@cbdrift2 жыл бұрын
Its all just changed - they released firmware 3.0 just today and the new nexus software - for FREE - on ANY elite ecu - downloads are live now - and their channel has a "how to convert to nexus firmware and software" its a TONNE faster to connect and datalog!!!!
@humbleperformance
2 жыл бұрын
NSP is not available for the 550.
@cbdrift
2 жыл бұрын
@@humbleperformance Yup yup - refresh - it might not have been visible to you at that time yet - its on their channel in the description for the elite nsp release from 550 upwards to 2500 just upgraded my 2500 to nexus :)
Пікірлер: 53
I've watched tons of haltech videos, this one is pretty well explained for the shear magnitude of how complex tuning is
We definitely need more haltech videos. I didn't know how to upload the basemap. For b series the s300 is pretty straightforward, nsp software takes some getting used to.
Definitely make more of these videos. I would love to see how to run coil on plug using the distributor trigger and the Halltec 550. Liked, subscribed, and will DEFINITELY be buying from humble for all my race car needs.
Super helpful for someone like me that's just looking to start playing with tuning their car on a new ecu. Appreciate ail thre rambling and thoughts put into the video. Was totally worth watching. Keep up the great videos man.
Another great DIY video, can't wait to get my ecu. I did buy from humble and they were easy to work with, answered my many questions
Awesome basic start up parameter info thank you Kenny very helpful👍
Tons of info on this vid , I appreciate you Kenny , keep the content coming 💪🏽🙏🏽🏎💨🔥
Glad to hear you brother. You sound healthy. Very cool.
This awesome! Nice work
Thank you for the information! Hope to be installing a haltech 750 in my 91 accord to start off my build
Thanks heaps! This information is invaluable!
Awesome video
great vid!!!!
Bro u kill the blog bro this its such off great inf this its the second time I see it ❤
Thanks Kenny!
Thanks for the video. Can you run a B-series VTEC control and ignition maps with the Elite 550?
You can use the NSP software to tune the Elite series now! Get onto it. The load times and additional features are worth the change.
In my R32, I can’t get it to idle at 14.7 no matter what I do. Currently, the target is set to 12.8. Anything above that and it starts misfiring violently. I verified all engine, TDC, sensor and injector settings were correct and I can’t get a stable idle at 14.7. I’ve accepted that 12.8 is what the engine likes and that’s where I’ll keep it until I figure it out somehow or take it to a specialist. I’m thinking it could be because of either the Idle Control or O2 Control PID settings.
Kenny how well will this work with vtech e? With gas prices I’m trying to come up with some options.
Awesome can you make more videos like this maybe do Hondata Kpro one for basic tweaks of base map and things to change for guys with kswapped cars
How is the setup for a j32?
@humbleperformance Care to share oem distributor settings I can’t get the Oem distributor to work getting home sync trigger count error . Car runs fine on the Hondata. Tried the settings in the video with no luck .
Love the video it was great. The main thing I would change/mention comes from when you set up the engine cc. Don't just put 1800, 2000, 2200 etc. Make a habit of taking and multiplying your bore x stroke. Doing this will give you the exact cc which is never just straight 1800 etc. Will also help with setting up engines that have been bored (IE a gsr that's 84.5mm Instead of stock bore) or engines that have been stroked/destroked.
@humbleperformance
Жыл бұрын
It doesn’t matter that much.
How did you wired the VTC cam sensor ?, there is only 1 cam input on Elite 550.
I'm currently running my d15b7 with d16z6 head on a stock p06 without vtec. I just need to wire it and tune it. Im thinking about getting the elite 550 diy pin kit from you guys. Do you guys have a basemap for high compression NA d15? If not could I use a tune for a very similar engine setup like the d16 and correct the displacement? Then use closed loop learning to learn how to make changes? I don't really want to pay someone for a dyno tune, I want to learn how to tune it myself NA first before going boosted. I want to do low compression piston/rod/turbo setup down the road but for now I just want vtec working and a proper tune/ecu.
Can you make a basic set up video for kseries like 05-06 DC5 with the Platinum Pro?
Thanks sir training KZread channel
i need this for ktuner
So i can’t use it on my stock k24a2 tsx? I’d like to easily convert to cable throttle.. New ecu is 500-700.. might as well go haltech if i can use the elite 550 …
Cool video! But at around 21 minutes when talking about injector flow at given pressure, your not making it clear that its about pressure Differential. It the engine is boosting 1 bar, and the fuel base pressure is constant at lets say 3 bar, the effective flow rate of fuel is given at the pressure differential, in this example 2 bar. Most fuel systems work with a 1:1 fuel pressure regulator, meaning it targets the same pressure differential truthout the operation of the engine ainming easier and more predictable tuning. So now tith a 1:1 fpr, if base fuel pressure is 3 bar and the engine is making 1 bar of boost, the fuel line will be at 4 bar, retaining the 3 bar pressure differential seen by the injectors, hence having the same flowrate.
🔥🔥💯💯
How would you go about setting up COP using the sensor in the distributor?
@humbleperformance
2 жыл бұрын
You can do that no problem.
does this only work for k series or any honda ? i have a p28 ecu right now but im goimg to build my d series new to the honda a friend recommend me to this video and haltech 550.
@underestimatedgarage
2 жыл бұрын
@Dr. Mantis Toboggan i can save up for it im just wanna be able to do it right im already spending to build why not get a software that can benefit as well right?
@underestimatedgarage
2 жыл бұрын
@Dr. Mantis Toboggan thats true man, honestly i going k series one day all motor awd
I'm now saving up to order a 550 from u guys instead of a s300 because the cost of a s300 in a obd1 ecu is crazy people want gold for a chipped ecu
Can the 550 do Alpha N?
@humbleperformance
2 жыл бұрын
Yes
For coils u still run the the hondata coil retrofit with the haltech
@humbleperformance
2 жыл бұрын
You wire the coils up individually. No box needed
@puffy_performance
2 жыл бұрын
R u going to do a video on how to wire up coil on plug
Don't these ecu self tune over time? Or is that only a holley thing
@BoostedNW
6 ай бұрын
They do
@hyper8545
6 ай бұрын
@@BoostedNW 2 years xD
@BoostedNW
6 ай бұрын
@@hyper8545 Yeep, figured im sure you don't need to know, but others in the future might.
Nice! And I haven’t even watched The Who video
@boyflexnv
2 жыл бұрын
Okay finished the video, I don’t even own an H series but it was a bunch of basics to look out for! Will definitely buy turbo kit for my RSX from you guys when the time comes.
Its all just changed - they released firmware 3.0 just today and the new nexus software - for FREE - on ANY elite ecu - downloads are live now - and their channel has a "how to convert to nexus firmware and software" its a TONNE faster to connect and datalog!!!!
@humbleperformance
2 жыл бұрын
NSP is not available for the 550.
@cbdrift
2 жыл бұрын
@@humbleperformance Yup yup - refresh - it might not have been visible to you at that time yet - its on their channel in the description for the elite nsp release from 550 upwards to 2500 just upgraded my 2500 to nexus :)