Bro.. of course, Desis living in America and NA have to deal with this. my wife has saved the parts for the last15 years! Now I found it useful and your video is spot on. Thank you. Nanri 😊

Hello, Thank you for taking the time and putting this video. This helped us immensely.

Thanks, This helped me fix the coupler on the mixer! you save $200 for me !!!

Thank you I am going to try this now

Thank you bro, it was quick and easy. I was able to complete the job in 5 minutes.

Thanks. Your instructions were clear and worked. Was able to resuscitate an old mixie.

You are the best Bro. You saved me about $100 to $150 and an opportunity to impress my wife. Thank you so much as she is quite impressed 😀

Thank you very much bhai. I was able to replace the mixer coupler by myself.

Hello! This is Lyndi!

@stv1rkamp

11 ай бұрын

Hi Lyndi it’s meha sry I’m late

Thank You! This helped me fix the coupler on the mixer!

This video was very helpful. Thank you

Thank you. Helpful DIY

Thank you so much for the video,helped a lot

That was helpful.. Thanks...

awesome mann keep it up

Great help

Thank you. But couldn't put couplers on small jar back together. First part of the video helped a lot

@dallasdesidad

4 жыл бұрын

Haritha Chintarlapalli why couldn’t you put the coupler back ? Keep trying

@chilipepper76

4 жыл бұрын

@@dallasdesidad when I tried to run the jar, it was coming apart and it didn't sound right. I definitely am missing something. Will try again tmrw. But the main thing got fixed. I was putting on hold for a few months now and came across your channel, thank you again. Stay safe!🙏

Thanks Friend

Thanks man

Thank you for the video. Any info on fixing the overload button, somehow it is not working. Thanks!

thank you very much.

Thx For this. Basic question, where do i get the replacement coupler part(s) for this?

@samanvithasubramanyansivak4423

3 жыл бұрын

Ebay or Amazon

do you know the size of that O ring under the bush ? I have to replace that too and not sure where to buy it.

Very helpful! Thanks for sharing.

Thanku brother

Thanks for the great help. while grinding in small jar it spilled everywhere. middle and big jar will shake and slightly rotate in groove when grinding. can you please help me in solving this problem, if you know any solutiion. Thanks in advance. My mixie is preeti eco plus mixer, it is too noisy.

where do i find the tool to unscrew the jar coupler? the coupler is broken on the jar and wont come off - its hard to grip it because it does not have those extensions anymore.

Can you please show us how to make it with the big jar? Since its different for a big jar

hi, In my Preethi mixie small jars old coupler - all the 4 white extensions are broken. So, I'm not able to get the old coupler out. The jar coupler tool is no use, since I'm not able to engage it with the jar coupler. Any ideas how to get the broken jar coupler out?

@dallasdesidad

3 жыл бұрын

Hi Latha, this is one of those tough ones . At this point you have to take it to the shop because I was unable to open one of jar coupler in the same condition. Unfortunately we might not have the tools to do this unless you can find a tool to hold the base to twist it open . Good luck .

My jar is leaking- do we need to change both couplers or o w in jar is enough?

@dallasdesidad

Жыл бұрын

Just the jar should be good enough

Can you please show us how to clean small jar

@dallasdesidad

Жыл бұрын

What do you mean clean the jar ? Share a picture

@swethas4066

Жыл бұрын

For small jar… water is going inside and when we shake jar, clearly we can hear water sound.

@dallasdesidad

Жыл бұрын

Sorry I have never dealt with this scenario. You should look into replacing it

Hi, the tab in my jar coupler, broke. I am still trying to figure out how to remove the coupler off the jar. Any idea on that front would be greatly appreciated

@dallasdesidad

4 жыл бұрын

Aparna Easwar did you watch the whole video ? All the ideas in the video . If not let me know

@dallasdesidad

4 жыл бұрын

Aparna Easwar send a picture

hey the blade spins but gets stuck easily - it does not do this previously! is this a sign that the coupler on the power unit needs replacing? i am also thinking perhaps the blade is dull and lost its sharpness perhaps?

@lukaas0073

3 жыл бұрын

Hi I think there is a safety point in that the coupler stops spinning on the axle before the motor burns out.

@raidutt558

3 жыл бұрын

You have to replace the coupler because the back side of the coupler might have lost its holding point. That's why if there's no load the blade moves freely. When we put any load,motor runs but not the blade.