IDK if anyone needs to see this but, when using E6000 glue , I use a scrap plastic piece & pour out a big blob of the glue on to it , then use a ball tip tool to apply it to my earrings , So you don't have to go super fast & It's less messy c:

The shrink ruler is genius!

@lamia8089

2 жыл бұрын

@Lucycat Playz She explains at 1:59. She made a real size ruler in Photoshop and printed it in shrink plastic then shrunk it :) Maybe you can google ‘print real size ruler’ and just print it on shrink plastic.

@lamia8089

2 жыл бұрын

@Lucycat Playz You can try printing on regular paper and place the shrink plastic sheet on top of it then trace the ruler, cut it out, and shrink it. When tracing you can use an actual ruler to get straight lines :)

Brilliant idea with the ruler. Definitely going to do that. Thank you so much!!!❤

That trick with the ruler is so smart!

This girl is an skrink-earring genius. :o

Yay! We have the same oven! Also, fantastic idea to use embossing powder! Thank you ☺️ for this tutorial!

That ruler trick saved me. Thank you for sharing your secrets!! Beautiful earrings :)

The ruler idea is so smart, thank you for sharing!! I want to try with printing pieces for earrings, but I’ll also try with the regular clear paper first (as soon as I figure out if I should use the frosted back and how to color them)!!

I didn't make a video but this was the first tutorial I watched on this, and I love it. Thank you so much for making this. I've been making earrings now. I use uv resin, but I also appreciate the ruler.

Thank you for this video and thorough explanations. ❤

Thank you for this my daughter just got her ears pierced and while it will be a few months before we can switch her earring this will be a great project for the summer.

the embossing powder is super neat :o!!

Absolutely great work👍👍.

How lovely.

YOU MADE MY LIFE 10 MILLION TIMES EASIER TY TY *BOWS DOWN*** 😂❤😊😊

Thanks so much this is awesome!

Too cute ☺️ TY 👍🏼

this is such a cool video! you are very underrated

danganronpaaa!! ok you're gonna get huge on ere cause ur crafty and relatable!! awesome video keep up the good work!

You are so smart printing a ruler to know what size they’ll end up when they shrink!

Great video

Hi, amazing video! Question, in here you just cut the images out with scissors, but in the video you also mentioned sometimes using your brothers cricut. On what base material do you set it, so it cuts all the way through? I have to cut it twice as it didn't go deep enough through the shrinking paper.

This is so cool 😎

amazing ty

The embossing powder technique looks awesome and way faster than adding resin to each one at a time! Does it adhere pretty well? Or will the embossed layer pop off if the earring hits anything? Or if you squeeze it?

Hi! I just bought some stuff you made from nine tails ^^ I love the art soo much!

Hello great video tutorial! I love the embossing coat you use and I am very interested in using it. However, can you use this on regular shrink plastic material ? Additionally, can you use the embossing on sticker paper ? Thank you.

Literally sad you only have 44 subscribers! Your content is really good, hope you grow more!

You gave so many good tips this is my favorite video on shrink jewelry !! Would this work fine with a regular earring hook not stud

@restless_ness4266

3 жыл бұрын

Yes! I have a few designs that are dangle shrink plastic in my Etsy shop. I have some gameboy, peach and strawberries as examples there.

omg that ruler idea is soo cool! I'll have to try and make one too so I don't have to guess sizes every time aha xD

@restless_ness4266

3 жыл бұрын

I just added it now! Sorry, I thought I had it added already!! Let me know if you have problems with it. It should work tho!

@MaryLilianS

3 жыл бұрын

@@restless_ness4266 Thank you so much! :D

These are adorable! Thanks for a great video! Do you know how to make acrylic earrings? X

What brand is the oven you use? it looks very good

Hi! Thanks for the helpful video! What printer are you using and are all jet printers good for printing on shrink dinks?

The monokuma onessss

these look so cool, but when i did it the shrink plastic warped when i tried to melt the embossing powder. any tips?

Do you have a video on how to size it on the computer to print?

Once I learn and make a couple pairs, I hope I can sell some!

Hey ! Question! So you are printing on the shrink papers?

Can you share where you got your ink jet shrink paper?

Would the embossing powder work for larger designs??

Do u use the same oven for food?

Any suggestions for programs for the art part?

How long did u bake the shirk wrap and the powder ?

What embossing powder and ink pad did you use? Or does brand not really matter?

what model of printer did you use?

Hello lovely lady, you are so informative and sweet! Can you link which ink jet shrink plastic you use?

Can we print on fine type shrink dink?

how do you keep them from curling again in the oven? everytime I try to melt the powder, it also just curls up my design

do you use ink jet shrink film?

This was an awesome video. Maybe I can save someone some trouble though- the embossing powder caused my images to bleed. I used Sharpie on ShrinkyDinks brand plastic. I used the exact embossing pad and powder she used in the video. If anyone has any tips let me know!

What shrink paper are you using? Do you have. Link?

Actually did this and when I take the pieces out of the oven, first, it will get a sharp outline, like it was a saw, and second the colors will burn a little, also, I tried to make the colors more bright but it won't look as it should

Ahh great tutorial it's so cool to see what techniques people use 😍 did you try uv resin for doming? Why do you prefer the embossing powder? Is the result just as clear and shiny as with uv resin?

@luckysunnyguineapigs278

3 жыл бұрын

Karina Ryan tried embossing powder in the meantime and didn't like it, maybe for you it works though?

@braiditnay4113

3 жыл бұрын

@@oicriativos9006 hi, how did the embossing powder work for you? I’m trying to see what’s the difference between the two.

Did you use the shrinking plastic/paper, to print out the patterns or just glued the patterns onto the shrinking paper?

@restless_ness4266

Жыл бұрын

I printed the designs onto the paper. They sell a few different brands of shrink paper like this. Make sure you only use it with an ink it jet printer!

Omg I love your video!! This is exactly how I want to do my KZread video! How do you do it, what program do you use! I was told to make slinky dink art crafts and your video gave great information! Thank you! Btw love your back ground music!!

Can you please share which ink u use? My printer’s ink doesn’t dry on the plastic material and overall looks bad

@RoyRodriguezx

Жыл бұрын

Try turning it over to the other side. You're printing on the wrong side.

Does the embossing powder method give you any issues when dealing with punched holes for findings?

@DianaMirelly

3 жыл бұрын

Probably. Unless you move the power away from the hole before baking.

@DianaMirelly

3 жыл бұрын

Wait lmao I just realized we have the same name

When we have recycling plastic, how would we know if it is shrinkable? In other words, how would we know it can be used for making shrinkable jewelry?

@laurenscribblez

3 жыл бұрын

If the recycling symbol on your plastic has a 6 in the middle of it you should be able to shrink it! It is the type of plastic that stuff like baked goods and sandwiches come in.

Can you please do a video on how to know what size your image is before you print? This is the part that stumps me! I can't seem to find an actual size ruler in any of the programs I've tried!

@restless_ness4266

Жыл бұрын

I have a ruler linked in my description! It's a ruler I made and its free!

Can find the ink pad.

Which plastic do you use? I just tried graphix and it is awful. 90% of the time the ink crinkles and peels off during baking. I don’t know what I’m doing wrong

@NatalieBoat111

2 жыл бұрын

I have had the same issue! have you tried any others that you've liked in the time being?

Do you have to have a specific printer to use things like shrink printer paper or sticker printing paper ? I don’t wanna ruin my printer trying :(

@spyersmr

3 жыл бұрын

Dont need specific printer for this. A lot shrink paper are for inkjet printer. You can looking for: "Sticker paper for Inkjet printer" or "Shrink film paper for inkjet printer" and you will find that ;) !

Would you say that powder is better than Resin?

@TykitFleine

Жыл бұрын

From watching this and handling resin myself I'd say yes the powder is better! Resin is much more toxic, requires further safety such as gloves & respirator and you'd need to put down the resin carefully and cure each one in smaller quantities depending on how big the UV lamp is (I have one that would fit maybe half the amount of earrings she made) if you're using shrink plastic you'll already be using an oven to make em shrink so may as well use the exact same method to protect them too!

Hi! May i know where did u buy the shrinking paper? Really wanna try it out! Thankyou!!

@tenzinchoeying4461

3 жыл бұрын

Amazon- shrinky dink

@ziyinlow

3 жыл бұрын

@@tenzinchoeying4461 thank you!! ☺️

@emilyantimo8077

3 жыл бұрын

They also sell it at craft stores like Michael’s, hobby lobby. I got mine at Michaels for 5.99 and there’s 10 sheets in each pack

have you tried using a heat gun for your embossing powder? I may try that.

@TheAwesomestrawberri

2 жыл бұрын

A heat gun will probably blow all the powder off.

@lilgurlseishi

2 жыл бұрын

There are embossing powder heat guns that doesn't blow air. It heats up the powder and melts it. You should be able to find them in the scrapbooking aisles of craft stores.

@jennifergamblin1547

2 жыл бұрын

I did use my embossing heat gun and it worked great. Its specifically for embossing.

wow i applaud you for not using gloves with the toxic e600 glue >.< haha you got it on your nails too that stuff smells super string

Hi could you please tell me the brand name or put the link for the shrink paper you used? Thanks so much!

@ladyfox134

3 жыл бұрын

Hi. Idk what brand she uses but this brand is really great www.amazon.com/dp/B079TFRCML/ref=cm_sw_r_cp_apa_fab_6kxyFbGN4GKBQ

What shrink paper would you recommend?

@itsritafoxx

2 жыл бұрын

Grafix Shrink paper white worked beautifully for this!

Did you print the ruler on shrink dink then bake it?

@restless_ness4266

Жыл бұрын

Yes, that is exactly what I did!

Where did you buy the shrink plastic

@Ennu1981

10 ай бұрын

Amazon has them

Can you bake these in the same oven you're baking your food in??

@naomydrawson7491

2 жыл бұрын

Yes ! you can bake them in your oven and the instructions are the same ^^

@penelopebeaule9293

2 жыл бұрын

@@naomydrawson7491 how long do you bake them for?

I would like to know, how you avoid the sharp teeth, you know what I mean? And the colors to be way too saturated or dark

@alwaysthreadedwithlove

4 ай бұрын

You have to make ur image brighter ... When u heat the image and it shrinka the colors become darker from squishing and from the heat!

hi, can i use heat gun for embossing powder? i don’t have an oven 😧

@yosualonso69

3 жыл бұрын

yes

@restless_ness4266

3 жыл бұрын

You can! But if you're making tiny pieces like I do, they will probably blow around everywhere. I don't know a way to stop them from blowing around. An oven would be easier to work with for smaller pieces!

where did u buy ur printable shrink paper?

@ninaxx5318

3 жыл бұрын

Im wondering the same thing too

@lalaismyalterego7444

3 жыл бұрын

You can order it off Amazon. Just search Shrinky Dink. I've tried both the brand Shrinky Dinks and Grafix. Grafix, lately, seem to get better reviews, as some feel the Shrinky Dink brand ones have been reformulated. Don't bother with the clear inkjet. It's not truly clear and instead turns frosted after shrinking. There's a bit of a learning curve too, so don't expect perfection right at the bat and practice. Your heat settings, oven, technique . . . all these can affect the final result. However, that's not to make it seem troublesome. I still have fun experimenting. I even bought white Grafix sheets to pass out for kids for Halloween.

How come there’s print on the back of the earrings? Won’t that waste ink? D:

@TheAwesomestrawberri

2 жыл бұрын

She mentioned in the beginning that its recycled shrink paper. I imagine it was just for the tutorial or she has awesome customers that are supportive of recycling materials. (recycled = used in another project)

what type of ink do you use?

How do you add the glitter??

@restless_ness4266

3 жыл бұрын

There is glitter embossing powder available in craft stores! They even have different colors of glitter too!

we don’t have an oven but we have an oven toaster :’)

where did you buy the shrink plastic?

@thelegendary7743

Жыл бұрын

From Amazon online store

@reynafeusi2715

11 ай бұрын

@@thelegendary7743 will you let us know what brand of shrinkable paper does it have to say printable?

Hi! How long do you leave the embossing powder baking for? (:

@TheAwesomestrawberri

2 жыл бұрын

on the oven it shows the timer is set to 1 minute.

MONOKUMA

Will this work if you stick vinyl prints on the shrink plastic instead of printing on the shrink plastic itself?

Everything worked perfectly until I baked them with embossing powder, they started curling again and didn't flatten back out. There was no way to flatten them back out without smudging the powder! Anyone have recommendations?

@deanontheinterwebs

Жыл бұрын

UV resin and a curing torch / UV nail curer works for this too as an alternative (and don't need to go back into the oven).

I have some doubts about the process, I use the same material in my oven but it just twists and I don't see any state coming back, would you give me some advice?

@patito2970

3 жыл бұрын

@Luna MagnascoFarinas Thanks, I did some tests and I realized that I should not put it in baking mode, I should put it in broil mode and it helps me a lot more, since apparently portable ovens do not work in the same way

Where's the ruler template 🙂

@restless_ness4266

3 жыл бұрын

Hello! Sorry about that! I actually just added it now, I thought I had added it already. If you have problems with it, let me know. It should work tho!

@RC-wm3zp

3 жыл бұрын

@@restless_ness4266 yey thankyou! 💛

Can i use microwave to bake em? ☠️

@Cindy-je5no

11 ай бұрын

No, the instructions on the shrink film package says you can't use a microwave.

@alexhernandez3059

10 ай бұрын

You can use a heat gun instead.

Hi , I have a question about your channel name .Why is your channel name “Restless_Ness”????

I have a question. Did you make your own designs/drawings?

Hey do you really sell earrings with the back part with parts of other drawings?

@restless_ness4266

Жыл бұрын

I sold these as b-grade earrings and had them on clearance or in my lucky bags. I mostly made these for this video!

How long do you keep them embossing powder in the oven for ?

@JaggedBeauty

3 жыл бұрын

It showed 1 minute

Concerned that you are using E6000 as it's an irritant on skin.

I dont know why but I'm the type of person who doesn't understand stuff right away but may explain the whole ruler thing and how it works? I'm confused. Sorry.

@carlymnielsen

3 жыл бұрын

You trace a regular ruler onto shrink plastic so when you shrink it you can tell how the size will end up.

Your daughter? You are sound like you are 16

I bought all this same stuff, but after a few days my design started to bleed. What did I do wrong? 🥲 I thought the embossing powder method was supposed to not cause bleeding