DIY how to float banshee stator
Автокөліктер мен көлік құралдары
I know its not the best, i had someone record me on my phone so there is NO editing, so this is straight up how long it takes. Most go faster, been a while since i've done one. Have a good one guys!
Пікірлер: 68
The banshee man is back ! Time to watch these new videos during lockdown!!
@kevingalindo1
4 жыл бұрын
Mathew davila lol. I'll be back soon with some videos on assembling and entire bike.
Such an amazing video. I literally have been watching this entire channel to help me through my banshee build. So many people do half @ss work but South Texas banshee takes the time to do nice clean build! Thank you for everything you put on here for us!
@kevingalindo1
2 жыл бұрын
361-243-0431 Call or message me to talk about that harness sir.
Dude I've been able to do everything to my banshee myself bcuz of your vids. Thanks you've saved me soo much!!!
@kevingalindo1
4 жыл бұрын
John Snatchko very much appreciated !!!!
Thanks man I got a banshee for 800bucks and with your videos I got running great starts 1st kick every time n I learned so much from these. Stay safe.
This allows you to plug it into a dc voltage regulator/rectifier. Then you can use a battery to power your lights with no flicker. Your engine will charge the battery just like a car or motorcycle. It's popular with a lot of night riding when people want to be able to leave on lights at night to be seen also.
@YIRMASTER
4 жыл бұрын
What kind of battery would you use and size of it, where would you mount it and how would you connect it? Love to see a tutorial on that or just a finished one pointing out what you did.
@chrissauer6159
3 жыл бұрын
Very informative! Do a video with the rest of the setup, connection to the rectifier and lights.....etc!
@johntucillo5375
3 жыл бұрын
Would love to see a video on this with the battery hookup before I finish my build
@nathanielpena4474
3 жыл бұрын
what happens if you run an led light bar without doing anything to the stator or getting any conversion kits ?
@johnnyflores7032
2 жыл бұрын
@@nathanielpena4474 youll burn the led
Nice to see you back. You remind me of me, back in the day when I used to fix cars. Doing it right the first time. Love it bro!
Welcome back Kevin i hope you and your family are all well keep up the banshee videos👍
You’re the best. Love your videos. Very informative.
Maybe solder the new yellow wire onto the black one you are removing (at ~ 13:27) and when you pull the black one out, the yellow one is installed in the factory loom for you. it may work for ya. Great videos and subscribed!
Glad to see you are posting new content!!
@kevingalindo1
4 жыл бұрын
Banshee Mitten Riders more to come!
Can’t wait to see more vids!! Hope your doing well
Perfect brother
Hell ya brother great video as usual keep em coming
Good to see that you are still doing good man hope all is well during these times. Will you ever go back to doing raffles again?
Excelente video hermano.
Yo where you been my man. I ordered a wiring harness off you the other day.cant wait to get it
Thanks for you videos man big help know wanna kno what kind of regulator can I used
Love your videos man....any way u can do 1 on installing and removing crank bearings from a crank?
After u float ur stater so u hook them all back up to same spot u took them off of or do u have to get different stuff to run led headlights
Hey man what would I need to do for a fuel injection setup for my 87 banshee I live in Montana and ride from 1700ft to 8,000 feet in 45 minutes just curious what I would need to do or what it would cost to have done?
What is the biggest boater you can get stock or a Yamaha pay the and do they only call with 2 stroke inches
Kristopher Morrison on fb great job bro any videos on kicker gear replacement
Does it matter if you solder the wire back to the post. or solder the new wire to the post
Why would you need to float the ground on the stator?
@kevingalindo1
4 жыл бұрын
Tony J it allows you to plug it into a dc voltage regulator/rectifier. Then you can use a battery to power your lights with no flicker. Your engine will charge the battery just like a car or motorcycle. It's popular with a lot of night riding when people want to be able to leave on lights at night to be seen also.
@tonyj5408
4 жыл бұрын
South Texas Banshee I got you, Thanks Kevin keep up the good work
@tonyj5408
4 жыл бұрын
South Texas Banshee I bought your leak down tester and it works great , thanks brother its a quality tester , stay safe out there buddy
Flip that rubber boot around the other way, tube first so it’s easy to pull through the case :)
Im rebuilding a 87 banshee im putting new stock cylinders on it but i bought 20cc domes i live in st george utah 2000 plus elevation what kind of gas should I use. Please and thank you
What voltage battery is the stock stator capable of charging? 6 volt or 12 volt?
I bought a Ricky stator with floating ground but see no videos on the installation. Do I snip the ground like you did or is it plug and play?
Does this work with an 83 Honda atc 200 if I want dc instead of ac
Will it be the same on a 01wr426 stator
Is there a way I can test to see if my stator is floated already??
Hello sir my names mark I have quick question,what size are the fuel lines on the banshee I thought 3/8 or 1/4 but not sure lol please help
Hey man I got a 2003 banshee 350 and idk what’s wrong with it I tried to work on it but I just cant I’ll be glad to see if you can! Just text me once you see this
Shall i cut the black wire?? What is the purpose of the black wire??
Kevin, can I still run leds without a battery if I floated the ground already?
@Spencer.76
4 жыл бұрын
I would like to know if this is possible as well. Thanks Kevin. Blessings to you and your family.
@ericramos5283
2 жыл бұрын
Hi, everybody I want to know that too?!
Do you have to buy a certain output stator or you can use your regular oem stator?
@johntucillo5375
3 жыл бұрын
Ever find an answer to this
Here’s a full dc setup that can be used after your stator is floated. All years available comment here or text “DC HARNESS “ to 361-243-0431 www.ebay.com/itm/174757957798
Can that work on my blaster?
What's the size of the bolt that hold the pickup coil in place?
@kevingalindo1
3 жыл бұрын
I believe they’re M4x.07 screws
Do you know the symptoms of a stator going bad? When my basically stock banshee gets hot it dies. PUTTING, FLYING doesnt matter iy just starts cutting out and 100% dies. Not a fuel issue, no blogging definitely a spark issue. Let it cool for 10 minutes and fires back up and rips till it gets hot...then dies. Wasn't sure if I should replace the stator or look elsewhere for issues.
@mannieghee1370
3 жыл бұрын
Ever find an answer? I’m having the same problem
@jesstaylor3200
3 жыл бұрын
@@mannieghee1370 I tested the stator and it passed the ohm test. But after changing the coil and cdi the banshee still did what I originally commented. I replaced the stator with a New Genuine Yamaha Stator and it fixed the issue.
Never mind found it lol
What's the purpose of this??
@gompie250
4 жыл бұрын
Its for putting a battery on the banshee to install LED lights
@kevingalindo1
4 жыл бұрын
Lamu Taafua it allows you to plug it into a dc voltage regulator/rectifier. Then you can use a battery to power your lights with no flicker. Your engine will charge the battery just like a car or motorcycle. It's popular with a lot of night riding when people want to be able to leave on lights at night to be seen also.
@LamzLamz714
4 жыл бұрын
Ohh sweet..can u post a video of the full set up?
@kevingalindo1
4 жыл бұрын
Lamu Taafua I'm doing a DC road legal harness for some guys out on the Virgin Islands. Give me a little time to get it all together and I'll cover it for y'all.
@LamzLamz714
4 жыл бұрын
@@kevingalindo1 sweet bro...keep posting ur vids...they're awesome