Beauty of a job mate 🖒look showroom new. Encouraged me to get off my arse and get my alloys that are sitting doing nowt cleaned up and sold. Thanks fella for video!

@cvrpov

3 жыл бұрын

Haha thanks for watching

Amazing work man, keep it up

@cvrpov

3 жыл бұрын

Thankyou

Amazing finish.

@cvrpov

3 жыл бұрын

Thanks mate

Another top job👍👍👍

@cvrpov

3 жыл бұрын

Thankyou

Awesome video

@cvrpov

3 жыл бұрын

Thankyou 🙏🏼

Nice job mate,,,,,,,,from NZ

@cvrpov

3 жыл бұрын

Thanks NZ

Greaaat Thx man from France

@cvrpov

3 жыл бұрын

Bonjour 👍🏼👍🏼

Thanks you sir .true professional

@cvrpov

8 ай бұрын

Thanks for watching

Thanks for all your videos, wish I had your skills. Only thing I'd do differently in this video is I would have covered the car in the garage. I learned that the HARD way!

@cvrpov

Жыл бұрын

The overspray is minimal on this repair but not a bad idea to cover nearby vehicles

Hi mate great video. Just one question, when you sand down the scratches, it removes material. How do you stop it from looking bumpy? Do you ever weld or filler over really deep curb damage and then sand down? Thanks would love to know

Great project i really enjoyed it,and i know that your next project will also be greater

@cvrpov

3 жыл бұрын

Glad you enjoyed it thanks for watching

Great Video Thanks - Do you also lightly sand the black paintwork in order for the lacquer coat to key

@cvrpov

3 жыл бұрын

Yes key up with red scotch or something similar 👍🏼

Subbed! What are you using for a wheel stand to hold the rim while you're working on it? Been at this for 16 years and love to see new techs and how they do a repair. I'm always trying to learn new ideas, tricks and knowledge to get better at the wheel repair trade. I appreciate your videos and hopefully will be joining and contributing to the wheel repair video community soon. You're the only one so far, can't wait to see it grow.

@cvrpov

3 жыл бұрын

Thanks for the feedback mate. Its just an old black and decker workmate. The back of the van has proper wheel booth etc

@wheelsone6180

3 жыл бұрын

@@The-rave-room I'm not CVR-POV but pretty sure he scuffed the rest of the wheel (painted inserts) with a red scotch bright pad. You can buy them at you local automotive paint supply store. At least that what I use and do.

@cvrpov

3 жыл бұрын

@@The-rave-room yes mate all over

@dezcanso1540

2 жыл бұрын

@@The-rave-room what do you mean scotch?

Im in the smart repair trade myself after leaving body shop seen most of your vids and some nice repairs, one thing id say to people who are watching is that u cant just put any lacquer on a repair like this it has to be etch lacquer so it bites into the bare metal just as you would use etch primer on bare metal on body panels. Other then that nice work mate

@cvrpov

3 жыл бұрын

Hi Johnny. Thanks for watching. Its actually 2k and seems to hold up pretty well. Obviously different products will differ

@johnnyh2671

3 жыл бұрын

@@cvrpov were are u based mate whats your main source of work do u mainly deal with private/retail work or dealership/trade work

@cvrpov

3 жыл бұрын

Based derby notts etc. I did trade for 15yrs now all retail

Wowoowowo Great🤩...🇧🇷

@cvrpov

3 жыл бұрын

thanks

AMazing

@cvrpov

Жыл бұрын

Thanks for watching

Nice work, im fixing my Volvo BOR 19 inch rims and I wonder one thing, do you have to put clear coat on the brushed faces?🤔 I don't think the oem Volvo rims have it on the brushed surface 🤔 could be wrong

@cvrpov

3 жыл бұрын

clear the whole wheel. bear in mind some finishes might be a matte or satin clear

mint stunning i would be delighted handed back them rims on my car

@cvrpov

Жыл бұрын

The customer was very happy mate

Great video, I don’t have a rotary polisher but have a da, can this be used instead? Cheers

@cvrpov

2 жыл бұрын

Yes. Takes longer, but yes

Can you please do a video on mixing paint

@cvrpov

3 жыл бұрын

I've just done one pending editing/upload

Nice work. ....can i use a d.a sander or rotary is better? I have both

@cvrpov

2 жыл бұрын

Rotary is better

What grit did u use?

What psi did you spray with

Nice work! How long is 4 rims?

@cvrpov

3 жыл бұрын

its a process that takes a few hours mate

Any videos in the works for a fade or blend in wheel repair on a matte/satin finish wheel (Audi or ?) and any videos on repairs on 2 tone wheels with damage on both face and insert? Appreciate the videos.

@wheelsone6180

3 жыл бұрын

Also in the description it says rotary polisher/buffer. Is it a DA Sander or a straight Polisher/Buffer ? I noticed with pressure the pad kind of slows or stops, so I'm guessing Dual Action (DA)? Apologies if I missed it. Thanks!

@cvrpov

3 жыл бұрын

Its a rotary mate. My normal one broke so I bought a backup cheap one which slowed under load

@cvrpov

3 жыл бұрын

I'll bear this in mind mate

Is there a way to refresh the black trims in diamonds mags? I have GTI mags and I am thinking to remove curbs and refresh the chrome, but I’d like to also refresh the black trims, the paint is a bit faded. Will gray scotch-brite and gloss lacquer will refresh it? Thanks

@cvrpov

2 жыл бұрын

I would of thought so yes

Nice job. I thought there was silver paint under the clear coat. Is it really just pure metal?

@cvrpov

8 ай бұрын

On this type of repair yes

Did you rub the black paint before you sprayed the lacker ?

@cvrpov

3 жыл бұрын

Key with grey scotch

I like the video, thanx. What I am wondering is how you get the tire "loose" from the rim so you have more space for sanding the rim. Removing only the air will probably not help ;-)

@cvrpov

3 жыл бұрын

I have a bead breaker on the van. Its not detrimental that you do this with the tyres, but it does help

How much material do you actually take off the wheel going to spin the same is it going to look like it's not as deep on one side is it going to show the fact that one side higher than the other

@cvrpov

2 жыл бұрын

I understand what you are saying and thought the same when I first started doing wheels. Rounding off and reprofiling can be achieved without a visible dip in the area if its feathered out properly. Its amazing how well it can be done aswell

It has to colour.which colour did u apply?

@cvrpov

3 жыл бұрын

It is just clear lacquer over the whole wheel

How can you replicate the fine line groove from the machining?

@cvrpov

11 ай бұрын

Several videos I've made explain various ways to achieve it

Lmao 🤣 so easy to do thank you 😊

@cvrpov

2 жыл бұрын

No problem

Would it be easier with a smaller sander

@cvrpov

Жыл бұрын

No. The bigger disc makes it easier

🔥 284 👍

how much would this cost if i took mine to someone ?

@cvrpov

3 жыл бұрын

55-75 roughly

Is that clear coat

@cvrpov

11 ай бұрын

Yes

Is the lacquer coat colorless?

@cvrpov

3 жыл бұрын

Yes

Seen in a few videos from you now, dont you sheet customers cars when you are spraying? paint particles blown around in the air have just gone and rested all over the very car you are sorting in the garage lol

@cvrpov

3 жыл бұрын

If needed I bag the cars up.. which i do most repairs. The overspray dissipates quickly and in this video it goes out the garage door within seconds (thats why I was near the door). Thanks for watching

You are to sick, how do i get hold of you

.... And you need to balance those wheels

@cvrpov

3 жыл бұрын

Never had an issue not balancing wheels after refurb, never heard of anyone doing this either (I know alot of techs)

@STILLNIGHTPEARL

11 ай бұрын

@@cvrpovhere in SoCal I’ve never heard of anyone balancing a wheel after, you would have to remove an insane amount of material for that to even be relevant, in that case you have other issues, you might as well buy another wheel or get it re machined at the machine shop.

Nice vid, but jee chewing gum in the mic is annoying as heck...

@cvrpov

Жыл бұрын

It was a sweet out the customers car sorry 😅

@craigbrashaw9604

Жыл бұрын

@@cvrpov hope it was a good one 😂

Bruh are you chewing on hard candy or something?? I couldn't take it had to find another video

@cvrpov

2 жыл бұрын

Haha I did have a hard boiled sweet for some of the video

@stillfrosty

2 жыл бұрын

Lol

You eat to much from aluminium

@cvrpov

2 жыл бұрын

😋