Really interesting video, Hope see more videos from you. Good luck.

The way you're handling and storing your ram modules I'm not surprised you have so many broken modules. I'm surprised any work for you. If you just inspect them with a magnifier x30 (jewellers loop) you will probably find you have knocked off or cracked some of the critical tiny surface mount devices. Others will have just been zapped by static as I can't see you taking any anti-static precautions.

@Okhan97

2 ай бұрын

Static won't kill your ram bro, check the video of linus with electroboom

i just cleaned the stick cip and it worked! thank’s man!

what was the temperature used?

It makes sense to put flux and heat up the boards indeed, but it is unlikely to fix any board.

what is the device (blinker) you are using to check the ram sticks

@soundermax8091

5 жыл бұрын

Look at description

4863NG mosfet nhi mil rha h to aap koi substitute bta sakte h iska??

What was the contraption with 18650 you made ?

@SerenoOunce

Жыл бұрын

He attached a phone vibrator to the PCB holder. The micro-vibrations simulate bumping the IC with tweezers during the reflow.

You can also use your clothing iron I've tried with my broken 4gb stick and it worked I did the same method with my broken GTX 460

@daniellee6912

5 жыл бұрын

it's only a temporary fix though, you need to reball the gpu chip

@Kyle-ye4nj

5 жыл бұрын

@@daniellee6912 Wait, why temporary? Won't it be a permanent fix as long as the GPU doesn't heat up too much?

@shubhambhanot5547

4 жыл бұрын

Can u plz tell me how sis u use clothing iron

crap my ram blasted like popcorn

cleaning and reflowing solder joints how often does it succeed?

@SerenoOunce

Жыл бұрын

RAM modules generate very little heat, and heatsinks are really just for aesthetics. Reflowing a RAM IC is a waste of time and very likely to just make things worse. This would work on the old XBOX 360's bc RAM was directly on the mainboard, thermal stress would crack the solder joints. Not an issue for a RAM module.

@shiftctrlhack

5 ай бұрын

@SerenoOunce - He is correct. This is a waste of time and don't attempt this on a actual new stick's that are worth money. Send them to a professional to diagnose the problem instead of cooking all the memory ic's and rendering the entire stick junk when it could be as simple and 1 capacitor shorted to ground heating up that can be seen on a thermal cam, I just repaired 1 stick of CORSAIR 32GB DDR5 6400MHZ PLAT and if the customer did this crap before bringing it to me the whole thing would be destroyed and wasted.

nice GOB

What did u apply on the chips before heating, where can I get it from??

@princeantony7200

5 жыл бұрын

That is "flex" you can buy from local electronic Shop

@stopthemadness5477

5 жыл бұрын

Don't confuse him, it's liquid flux for SMD re-work - used with hot air re-work station for removing and re-mounting surface mounted components

@Kyle-ye4nj

5 жыл бұрын

It's flux, make sure you don't get a flux made with "acid" (those may damage the connections over time).

now inject a direct voltage them broken ram to see which one is shorted

may be there is short capasitor

@j-man6001

5 жыл бұрын

yeah thats what I think the culprit is on both my DDR3 PCL-12800 sticks, they get super hot, leading me to a short somewhere

Hello can u give me diagnostic error codes guide or something ?

Hi. Thanks. How many Celsius is the heat? Thanks. God bless, Rev. 21:4

nice prank!!!!!!!!

Leave all 4 + 3=7 in safe Place and Extract gold from rest of them🤣😋

Completely neglected to follow any temperature profile... Any fix won't last.

U have DDR2 ram bro

Menginspirasi

why does my ram not work anymore after a power outage?

@tu_pai

Жыл бұрын

u need avr. got to do with power surge or something

52167

click bait

That was a big wasting of time