Excellent. Thank you. I also love videos without any talking, where the instruction is all visual. Well done!

Thanks, it was very helpful since I was running out of drum sanders!

Super helpful to heck my little cheap manicure tool to sand my nails for fake nails! :D My good drill is too fast for that. Huge thanks from Hungary,EU! :)

@DTeK

2 жыл бұрын

Thanks :)

awesome !!! i was going to use extra strong glue, didn't expect it will work with wood glue ! great video thx

@DTeK

4 жыл бұрын

Yes, wood glue works if you use "painters tape", when it dryes it "fuses" to the paper grit.

Nice! Thanks for the tip, simple yet useful!

that methiod of getting a spiral cut is very smart!

If my wife saw me using a razor knife to cut sandpaper on her table that looked like that, this would be my last post . Ever

@DTeK

3 жыл бұрын

ha ha ;)

THANKS .from Argentina

Absolutely brilliant. So simple but so clever. I’ll start doing some later 👍

@DTeK

4 жыл бұрын

I uploaded a similar video 3 years ago and re-ploaded this one a few months ago, i use this diy sanding drums all the time ;)

@garyconstant4234

4 жыл бұрын

DTeK well I needed some fine grade paper to do the hard to reach places on my motorcycle casings and you can’t get them over 600 I think and then you have to wait because they come from China

Thanks,it’s very useful. Cheers!

amazing idea.

Cork is brilliant.

Well done!

Nice work

Powerful idea, great job!

Very useful, thanks

Great video thanks

Fantastic idea.

@DTeK

2 жыл бұрын

thanks

Show de aula!!! Parabéns, ganhou meu like e a minha inscrição.

@DTeK

3 жыл бұрын

Obrigado ;)

Simple and effective

Great work ! i like your channel :)

For dremel we can buy it however. But bigger, for drills etc are hard to find. I am going to make bigger ones becouse can't find it

My tention is free when I see your vidio tq

Best I’ve seen

For people asking about the pvc pipe diameter: he has to sand the cork (which is 24/25 mm diameter) so it all depends on how much you sand it down. E.g: Lets say you have a 25 mm cork and sand 5mm off from it, your pvc pipe needs to be 20mm. This explanation sounds kinda silly but since I see so many people asking the same...

@DTeK

2 жыл бұрын

in this case i used 16mm pvc pipe, the cork just need to be sanded a little bit bigger than the inner diameter of the pvc pipe for a tight fit, thank you for your reply :)

thanks

nice

nice.

Can we use this for metals??

Saya salut kreatif

They miraculously fell off the dowel back stage, can't believe the rod easily came out - if it had you'd have shown its removal

What is the size of the plastic tube? And where can i find it?

They have sanding attachments for that

This was a great video ... up to a point. It didn't show how you got the dowel out of the band of sandpaper since the dowel had tape the sandpaper was glued to the tape???. What was the thing attached to the cork?

@DTeK

3 жыл бұрын

Thanks, i don´t remove anything, the plastic pipe is part of the "drum sander", i just cut it in smaller pieces and the smaller pieces will fit in the "cork attachement" has you can see in the final part of the video.

@northerngirl4666

3 жыл бұрын

@@DTeK Thanks for this. I thought the plastic pipe was a solid wooden dowel!

На какое основание клеили скотч ?

How do you get sandpaper which is thicker and will last longer while sanding?

@herrade9183

4 жыл бұрын

Store

молодец)леруа мерлен и dexter тебя спалил)))

Did you remove the wrap from the pipe before cutting ?

@DTeK

3 жыл бұрын

no, the plastic pipe is part of the drum sanders.

What is the core? That you wrapped the tape over?

@DTeK

5 жыл бұрын

It´s a plastic pipe used in electrical wiring.

@qaulitycontrol7637

2 жыл бұрын

@@DTeK what the dia size of plastic pipe please my dear?

Sandpaper works sooooooo well with glue smeared all over it dude! Such attention to detail....bet you make some reeeeeeal quality stuff from what that video just showed

@bassackwards8422

2 жыл бұрын

Tell everyone you're a karen without telling everyone you're a Karen. What a loser.

but wont getting the glue on the sandpaper (rough side) soften it?

@DTeK

3 жыл бұрын

Its a minimum amount of glue where the sides of the sand paper are touching, it doesn´t affect it.

@littleraptor9898

3 жыл бұрын

@@DTeK ok thanks. i made my sanders 2hrs ago, thank you for the video

Only the paper-based skin will wear out quickly. Must be used on fabric.

@DTeK

Жыл бұрын

it doesn´t wear, it remains glued

What is the number (grit #) of sanding paper you used in the video

@DTeK

4 жыл бұрын

80 grit

😃N😃 i 😃C😃

is the superglue in the cork working?

@DTeK

3 жыл бұрын

The cork is not glued, its only used to atach the sanding drum

@luter82

3 жыл бұрын

@@DTeK I means this: 1:23

@DTeK

3 жыл бұрын

@@luter82 sorry, yes its working, i use it often and after 1 year its holding fine.

@luter82

3 жыл бұрын

@@DTeK oh great, Thanks!

How u remove the wood inside the sandpaper?

@DTeK

Жыл бұрын

the wood? i used cork

What size plastic pipe

@DTeK

4 жыл бұрын

12mm in diameter

Nice but I find it not very dependable seeing how no clue to keep the cork from doing its intentions without spinning also??

@DTeK

3 жыл бұрын

Pressure fit ;)

What a glue name ?

@DTeK

4 жыл бұрын

it is wood glue

Yep, coppying that one...

couldn't you just sand the pvc pipe to roughen it instead of taping over it?

@DTeK

4 жыл бұрын

No because the wood glue will not stick, but if you use another tipe of glue it will work, i choose the wood glue and the painters tape because they are super cheap.

Забивать абразивный слой клеем???Да тебе премию Дарвина надо выдавать!!!

ا

Take your gloves off, if they get caught is not fun, never wear gloves with spinning tools

@DTeK

3 жыл бұрын

Maybe with high power tools, this is a 170 w dremmel that i use always at low speeds using around 30/40w.

This is absolute not working!

@DTeK

Жыл бұрын

it works, i use the same method 5 years later, tell me what is not working and i tell you what are you doing wrong ;)