DIY Guitar Pedal Guide - Painting The Enclosure & Creating The Graphics - Part 3
Тәжірибелік нұсқаулар және стиль
Part 3 of my DIY Guitar Pedal Guide explains how to create the graphics in photo editing software to print out on sticker paper. I also provide tips on painting the enclosure before installing the circuit and finishing everything up. These methods are what I found to be most cost effective while still giving good results!
Part 1 of this guide: • DIY Guitar Pedal Guide...
Part 2: • DIY Guitar Pedal Guide...
Previous video where I demo my custom built pedalboard: • My Custom Built Guitar...
Drilling Template for 3D printers: www.thingiverse.com/thing:484...
Paper Drilling Templates: www.generalguitargadgets.com/h...
Weller Digital Soldering Station: amzn.to/3QKd5OP
Hakko Digital Soldering Station: amzn.to/45vswz1
These are affiliate links where I earn a small commission for purchases at no extra cost to you.
This is the easiest way to help the channel, thank you!
Amazon: amzn.to/484HUnU
Website: phazertech.com/
Donations
Buy me a coffee: www.buymeacoffee.com/phazertech
Пікірлер: 22
Very cool. I'm building my first pedal. The wiring info was an added bonus!
@PhazerTech
7 күн бұрын
Nice I hope your first build goes well! Also be sure to check out my DIY guitar gear playlist if you're interested in more builds
Bro, you put a lot of effort and time into this video. And you explained everything very well. I really appreciate it!
@PhazerTech
Жыл бұрын
Hey no problem man, glad you found it helpful!
Great video! 🎉
Hey... what a great tutorial. step by step, simple, straight to the point. Thank you! Cheers!
@PhazerTech
3 ай бұрын
Thanks for that, cheers!
hey, great video I have a Wampler Triumph that I accidentally scratched in two places in the back plate, but the pedal and the rest of the pedal are perfect. how can I fix it?
@PhazerTech
7 ай бұрын
Thanks! Without pics it's hard to tell, but in general I think it would be difficult to make the pedal look new again. You could try touching it up, but the results won't be perfect. Avoid using spray paint. I'd try to find paint that's the same color as the pedal and use a small paint brush to cover the scratched area. Then use a good quality clear coat to seal it.
I was worried that the sprays are flammable, but the problem should be as long as the product is in the air. So when it dries, the problem shouldn't be there. Also because you use these products in the video and I think they are also the ones used by most independent pedal manufacturers. I'm a bit paranoid, so thank you for clearing my doubts. Before making big mistakes, I prefer to read up on the web and with experts. (I used google translate because my English is too broken for others to understand me haha). Thanks from Italy! 🍕
@PhazerTech
Жыл бұрын
Awesome I'm glad the video helped clear up some things for you. You're correct that you won't need to worry once the spray dries. Best of luck on your build, and it's great to know I have viewers from Europe, I hope to tour someday!
Man i need a slanted hotrail in my strat !
@PhazerTech
3 ай бұрын
Haha yea it's a nice upgrade since a strat single coil in the bridge can be overly bright. The hotrail is bright but not too bright, it's just right. And it has really tight bass from being slanted.
What software are you using to edit the design?
@PhazerTech
22 күн бұрын
I used Gimp. It's similar to Photoshop but it's free and open source.
How to order your pedals?
@PhazerTech
10 ай бұрын
I don't have any for sale but I appreciate your interest. Maybe I should consider selling some in the future.
Nice Shirt
@PhazerTech
21 күн бұрын
Thanks! I got that Strokes shirt back in 2010 when I saw them live at Outside Lands.
👍
I see you use Linux. You got a new subscriber. LINUX RULES!!!!!!!
@PhazerTech
10 ай бұрын
Thanks bud! I think you'll enjoy much of my content. Also cool username and pic!