This is refreshing to see someone REALLY doing a DIY project instead of some guy with ten thousand dollars in tools given to them by tool companies for their channel.... that most DIY people dont have.
@SethBarrick
5 жыл бұрын
Thank you! That means a lot to hear that from someone. I totally get what you mean about that expensive equipment. I just used what was affordable for a college student haha :)
@Michelle-wd2oy
4 жыл бұрын
Stout Farmhouse Designs MLC Productions I’m so glad to read this comment. It is certainly frustrating for us REAL DIYers. Thank you for this video.
@KeepHammering7
4 жыл бұрын
Seth Barrick hey do you have a list of the wood needed and final dimensions ? Love what you did
@KeepHammering7
4 жыл бұрын
Would it be bad to stain after the project ?
@madjpey15 жыл бұрын
I've made a few of these tables. Instead of drilling through the top to secure it, use a 2x4 on the under side of the top that you drill up and screw into the top. Then use pocket holes on that 2x4 to secure it to the legs in between the legs. Now you have a top with no holes or screws showing.
@ItsJustMeMcKee2 жыл бұрын
Good job! I'm getting ready to make my wife one like this for our bedroom.
@ifollowjesus16674 жыл бұрын
What a beautiful build!!! This is what I call DIY!!!
@SethBarrick
4 жыл бұрын
Thank you! Really appreciate it
@luiscastaneda11904 жыл бұрын
I am making this tomorrow! Thank you for the DIY! I enjoyed the video and tips!
@DebZaragoza5 жыл бұрын
Thank you for posting this! I just bought a summer house, and have to get creative to furnish it. So, this is one project I'll be tackling this summer. Newly subscribed!
@SethBarrick
5 жыл бұрын
I absolutely love the farmhouse furniture! I hope your project goes well!
@texsox5 жыл бұрын
Nice build with tools that fit in a closet. Also, you set a great example of carefully measuring and taking your time with each cut. If you don’t mind a couple suggestions. Pocket holes would have been good to secure the top and another way to hide the fasteners. Also half lap joints are possible with a circular saw and your careful work habits.
@SethBarrick
5 жыл бұрын
I never thought about that. I think that would make future projects a lot easier. Thank you!
@gallier895 жыл бұрын
Just a tip, you are using that kreg jig incorrectly. It is supposed to be placed different distances from the end of the board depending on the thickness of the wood. That particular jig is designed to wood on 3/4” wood with it flush to the end. You are using 1-1/2” thick wood, so it should be placed 1-1/4” from the end of the board. And the stop collar for the drill bit should be placed where directions say based on the thickness as well. Hope that helps with future builds!
@SethBarrick
5 жыл бұрын
Thanks for the advice! I'm so new to all of this, but so many awesome people have been helping me out and I finally see improvement
@rchavez50565 жыл бұрын
Correct me if i'm wrong. From what I see you don't have a lot of knowledge about building furniture and using tools. I give you credit for trying. Most people like to complain about not having expensive tools like the rest of the DIY youtube group so they don't do anything. You did a great job, and it turned out great. The more you build and watch youtube videos the more you will learn. Keep up the good work. Again you two did an awesome job. 👍👍👍
@SethBarrick
5 жыл бұрын
Thanks so much! You’re totally right though. I don’t have a lot of experience but I find it to be so much fun! Wood projects are quickly becoming a passion of mine. I find the biggest problem is there are very few videos with enough detailed instructions. Is there someone you’d recommend me following?
@rchavez5056
5 жыл бұрын
@@SethBarrick I could recommend many KZreadrs, but Steve Ramsey from Mere Mortals would be excellent. He shows how to do things on minimal tools.
@rchavez5056
5 жыл бұрын
@@SethBarrick kzread.info
@Brian-41-14.racing2 жыл бұрын
Nice little project, awesome to see two young people taking the initiative to create something that they can take pride in. Why didn’t you use small L brackets to attach the top from underneath rather than the 2inch screws through the top. Just a thought for future projects.
@kyleburnett90286 жыл бұрын
So informative. Absolutely incredible.
@SethBarrick
6 жыл бұрын
Haha thanks man. If you want something like it give me a shout.
@running4fun742 жыл бұрын
Can someone please help me? Why only 5 supports connecting the two frames together? Why not 6? 9? How were the shelves put in? I thought they would rest on top of the 2x4s holding the two frames together.
@amusemet4 жыл бұрын
Nice! I can scale it to fit my area.
@stripermanly3 жыл бұрын
Nice look. However you may experience wood bow and separation on the top by not allowing for movement in the wood over time. Next time attach top with floating Z clips instead of screws and glue. I can speak from experience.
@IsaacFNghost4 жыл бұрын
im assuming that you can substitute glueing and clamping for doing pocket holes and glueing ? that would be better for me i think....
@billfeehan7336
3 жыл бұрын
What do you mean?
@mmcc_woodshop62884 жыл бұрын
Great video buddy!
@alianbaba93305 жыл бұрын
Beautiful.... thanks man
@SethBarrick
5 жыл бұрын
Letter H Thanks for checking out the video. I plan to have more wood projects soon. Stay posted
@dustinyoung194 жыл бұрын
How tall is this once completed?
@wyattslawnservice72125 жыл бұрын
Loved the video man! I subbed! you deserve more subscribers with content like this :)
@SethBarrick
5 жыл бұрын
Thanks man! I appreciate that. Keep posted for more content
@mariahcasso17875 жыл бұрын
okay, but can we just talk about all the throw back music ....
@SethBarrick
5 жыл бұрын
Glad you noticed! High Respect!
@luiscastaneda1190
4 жыл бұрын
Yeah I really enjoyed the music lol
@waynekerr24724 жыл бұрын
How bad did you stab your hand at 4:56 when you slipped with the screw gun
@SethBarrick
4 жыл бұрын
wayne kerr I basically had to get the whole hand replaced. Dang thing just fell right off haha! 😂
@donaldjones46933 жыл бұрын
But if you’re going to paint why did you stain it for
@LizzieAschmoneit5 жыл бұрын
Why stain if you’re just gonna paint?
@elchalyful
4 жыл бұрын
Lizzie Aschmoneit that would give you the option to sand it for a “ distressed” look.
@xorb-cg4hy4 жыл бұрын
What was the point of staining if u were just going to paint it ......
@nick1398066 жыл бұрын
Why did you stain it then paint it?
@SethBarrick
6 жыл бұрын
So that way we could make little blemishes along the white paint and the dark stain would appear instead of the light wood.
@TheMaroney5 жыл бұрын
When making the x. You can just cut 45s and have them resting on the top and bottom so it's even Also be care using kreg jig for everything. Especially on 2x2s. It make that joint weak.
@SethBarrick
5 жыл бұрын
Oh thanks! I didn't know that. Anything I can use to improve my furniture will only add to my kit and make my overall products better.
@carsecundino4 жыл бұрын
How much space is there between the two shelfs
@SethBarrick
4 жыл бұрын
Hey sorry about having such a late response to your question. There is 10 inches between the shelves
@renerosalez49155 жыл бұрын
Thanks !
@jsmk234 жыл бұрын
What is holding the middle and bottom shelves up?
@SethBarrick
4 жыл бұрын
the bottom shelves were screwed into the side 2x2's. See 6:43 through 6:50
@jsmk23
4 жыл бұрын
Seth Barrick did you have trouble fitting them in between the frame and would you possibly know how much you had to cut?
@SethBarrick
4 жыл бұрын
@@jsmk23 Kind of. The measurements were very close for so I didn't have to worry too much. But if you're worried about it you can always measure the empty space in the frame so you can make a good cut. Does that help? I can find some tutorial videos for you if you'd like
@jsmk23
4 жыл бұрын
Seth Barrick yeah that helps. Thanks again !
@liudu54355 жыл бұрын
Is that long like 74Inch?
@papo78445 жыл бұрын
You used 3 2X6’s? I only seen you glue two together but there are three boards for the top.
@SethBarrick
5 жыл бұрын
Yes I used 3 2x6's. I glued the two together first and then glued the third one to the other two.
@Hidden-comment1644 жыл бұрын
Your pocket hole is incorrect
@murphyslaw18324 жыл бұрын
Why stain wood before painting?
@MrT1-b5f
4 жыл бұрын
Makes no sense lol
@mikestengel37435 жыл бұрын
Do you have a list of the dimensions of each piece?
@SethBarrick
4 жыл бұрын
I don't have a list but I talk about it all in the video? I could try and make one for you..
@alyssakullman29075 жыл бұрын
How much did this all cost you
@SethBarrick
5 жыл бұрын
It cost me a little less than $300 dollars with all the tools included
@alyssakullman2907
5 жыл бұрын
I have the tools what about the wood and screws and glue
@SethBarrick
5 жыл бұрын
About $100
@davidboston45743 ай бұрын
Hate to say this, but this is terrible You don’t pre-measure the x parts, what’s Ana white videos on this part will help a lot .
Пікірлер: 69
This is refreshing to see someone REALLY doing a DIY project instead of some guy with ten thousand dollars in tools given to them by tool companies for their channel.... that most DIY people dont have.
@SethBarrick
5 жыл бұрын
Thank you! That means a lot to hear that from someone. I totally get what you mean about that expensive equipment. I just used what was affordable for a college student haha :)
@Michelle-wd2oy
4 жыл бұрын
Stout Farmhouse Designs MLC Productions I’m so glad to read this comment. It is certainly frustrating for us REAL DIYers. Thank you for this video.
@KeepHammering7
4 жыл бұрын
Seth Barrick hey do you have a list of the wood needed and final dimensions ? Love what you did
@KeepHammering7
4 жыл бұрын
Would it be bad to stain after the project ?
I've made a few of these tables. Instead of drilling through the top to secure it, use a 2x4 on the under side of the top that you drill up and screw into the top. Then use pocket holes on that 2x4 to secure it to the legs in between the legs. Now you have a top with no holes or screws showing.
Good job! I'm getting ready to make my wife one like this for our bedroom.
What a beautiful build!!! This is what I call DIY!!!
@SethBarrick
4 жыл бұрын
Thank you! Really appreciate it
I am making this tomorrow! Thank you for the DIY! I enjoyed the video and tips!
Thank you for posting this! I just bought a summer house, and have to get creative to furnish it. So, this is one project I'll be tackling this summer. Newly subscribed!
@SethBarrick
5 жыл бұрын
I absolutely love the farmhouse furniture! I hope your project goes well!
Nice build with tools that fit in a closet. Also, you set a great example of carefully measuring and taking your time with each cut. If you don’t mind a couple suggestions. Pocket holes would have been good to secure the top and another way to hide the fasteners. Also half lap joints are possible with a circular saw and your careful work habits.
@SethBarrick
5 жыл бұрын
I never thought about that. I think that would make future projects a lot easier. Thank you!
Just a tip, you are using that kreg jig incorrectly. It is supposed to be placed different distances from the end of the board depending on the thickness of the wood. That particular jig is designed to wood on 3/4” wood with it flush to the end. You are using 1-1/2” thick wood, so it should be placed 1-1/4” from the end of the board. And the stop collar for the drill bit should be placed where directions say based on the thickness as well. Hope that helps with future builds!
@SethBarrick
5 жыл бұрын
Thanks for the advice! I'm so new to all of this, but so many awesome people have been helping me out and I finally see improvement
Correct me if i'm wrong. From what I see you don't have a lot of knowledge about building furniture and using tools. I give you credit for trying. Most people like to complain about not having expensive tools like the rest of the DIY youtube group so they don't do anything. You did a great job, and it turned out great. The more you build and watch youtube videos the more you will learn. Keep up the good work. Again you two did an awesome job. 👍👍👍
@SethBarrick
5 жыл бұрын
Thanks so much! You’re totally right though. I don’t have a lot of experience but I find it to be so much fun! Wood projects are quickly becoming a passion of mine. I find the biggest problem is there are very few videos with enough detailed instructions. Is there someone you’d recommend me following?
@rchavez5056
5 жыл бұрын
@@SethBarrick I could recommend many KZreadrs, but Steve Ramsey from Mere Mortals would be excellent. He shows how to do things on minimal tools.
@rchavez5056
5 жыл бұрын
@@SethBarrick kzread.info
Nice little project, awesome to see two young people taking the initiative to create something that they can take pride in. Why didn’t you use small L brackets to attach the top from underneath rather than the 2inch screws through the top. Just a thought for future projects.
So informative. Absolutely incredible.
@SethBarrick
6 жыл бұрын
Haha thanks man. If you want something like it give me a shout.
Can someone please help me? Why only 5 supports connecting the two frames together? Why not 6? 9? How were the shelves put in? I thought they would rest on top of the 2x4s holding the two frames together.
Nice! I can scale it to fit my area.
Nice look. However you may experience wood bow and separation on the top by not allowing for movement in the wood over time. Next time attach top with floating Z clips instead of screws and glue. I can speak from experience.
im assuming that you can substitute glueing and clamping for doing pocket holes and glueing ? that would be better for me i think....
@billfeehan7336
3 жыл бұрын
What do you mean?
Great video buddy!
Beautiful.... thanks man
@SethBarrick
5 жыл бұрын
Letter H Thanks for checking out the video. I plan to have more wood projects soon. Stay posted
How tall is this once completed?
Loved the video man! I subbed! you deserve more subscribers with content like this :)
@SethBarrick
5 жыл бұрын
Thanks man! I appreciate that. Keep posted for more content
okay, but can we just talk about all the throw back music ....
@SethBarrick
5 жыл бұрын
Glad you noticed! High Respect!
@luiscastaneda1190
4 жыл бұрын
Yeah I really enjoyed the music lol
How bad did you stab your hand at 4:56 when you slipped with the screw gun
@SethBarrick
4 жыл бұрын
wayne kerr I basically had to get the whole hand replaced. Dang thing just fell right off haha! 😂
But if you’re going to paint why did you stain it for
Why stain if you’re just gonna paint?
@elchalyful
4 жыл бұрын
Lizzie Aschmoneit that would give you the option to sand it for a “ distressed” look.
What was the point of staining if u were just going to paint it ......
Why did you stain it then paint it?
@SethBarrick
6 жыл бұрын
So that way we could make little blemishes along the white paint and the dark stain would appear instead of the light wood.
When making the x. You can just cut 45s and have them resting on the top and bottom so it's even Also be care using kreg jig for everything. Especially on 2x2s. It make that joint weak.
@SethBarrick
5 жыл бұрын
Oh thanks! I didn't know that. Anything I can use to improve my furniture will only add to my kit and make my overall products better.
How much space is there between the two shelfs
@SethBarrick
4 жыл бұрын
Hey sorry about having such a late response to your question. There is 10 inches between the shelves
Thanks !
What is holding the middle and bottom shelves up?
@SethBarrick
4 жыл бұрын
the bottom shelves were screwed into the side 2x2's. See 6:43 through 6:50
@jsmk23
4 жыл бұрын
Seth Barrick did you have trouble fitting them in between the frame and would you possibly know how much you had to cut?
@SethBarrick
4 жыл бұрын
@@jsmk23 Kind of. The measurements were very close for so I didn't have to worry too much. But if you're worried about it you can always measure the empty space in the frame so you can make a good cut. Does that help? I can find some tutorial videos for you if you'd like
@jsmk23
4 жыл бұрын
Seth Barrick yeah that helps. Thanks again !
Is that long like 74Inch?
You used 3 2X6’s? I only seen you glue two together but there are three boards for the top.
@SethBarrick
5 жыл бұрын
Yes I used 3 2x6's. I glued the two together first and then glued the third one to the other two.
Your pocket hole is incorrect
Why stain wood before painting?
@MrT1-b5f
4 жыл бұрын
Makes no sense lol
Do you have a list of the dimensions of each piece?
@SethBarrick
4 жыл бұрын
I don't have a list but I talk about it all in the video? I could try and make one for you..
How much did this all cost you
@SethBarrick
5 жыл бұрын
It cost me a little less than $300 dollars with all the tools included
@alyssakullman2907
5 жыл бұрын
I have the tools what about the wood and screws and glue
@SethBarrick
5 жыл бұрын
About $100
Hate to say this, but this is terrible You don’t pre-measure the x parts, what’s Ana white videos on this part will help a lot .
Hey, check out my fish