DIY Exhaust Silencer
Автокөліктер мен көлік құралдары
Is your Loud Exhaust drawing unwanted attention? Pulled over for your exhaust? We have a solution! This time on Full Tilt Drift we make some simple exhaust tip silencers to quiet down the straight piped 5.0 240sx.
Beginning Jan 1, 2019 in California, exhaust modification tickets became non-correctable, and simultaneously, the police's favorite way to force a state Ref inspection if you want to contest the ticket.
Using some simple materials we'll show you how to make a moderately adjustable exhaust tip silencer for any car you need to quiet down.
If your exhaust is still too loud after installing there, simply remove them and fold the adjusting tabs down farther on the back of the silencer.
If you guys have any question leave them in the comments and I will do my best to answer.
Пікірлер: 98
Dude you reduced hours of work and at least an hour of the normal youtube instruction + youtube banter to just the instruction and all the video needed. Well done sir!
@jerrysmith7166
3 жыл бұрын
he's good at that! I just said the se. thing on a different vid he made. instead of 15 minutes he keeps it short and to the point
This DIY is very well done. While I'll probably buy silencers, the DIY has given me several ideas on how to improve the store bought. Also, way to wield the angle grinder!
I love how they get straight to the point and don't waste your time talking about stupid shut before showing you ... thanks guys great video ... your officially the first KZread channel I have subscribed to
@fulltiltdrift4909
2 жыл бұрын
Much appreciated man!
Quality content here. 100% straight to the point, very very very educational and informative. Thank you SO much for not babbling on and on about random shit like so many other youtubes. Great job on the silencers, you sounds like you know EXACTLY what you're doing and talking about. 🤘
Very well done. what you built is on par with a on the shelf muffler. i really expected this to be a "youtube" hack job, but i was happily mistaken. For folks saying "put a muffler on" this is better then cutting apart your existing exhaust, and it's removable for the track. WOT won't sound much different, but low rpms/idle, you need that a little quieter for the sake of law enforcement. Great job once again!
This was an awesome and to the point video.
This is so useful. Thanks for the video
Good job! worth liking the video and subscribing to your channel. It's not even perfectly to silence the sound but it reduces the decibels somehow. I need something like this in the Philippines my neighbors hated me every time I start my car especially cold start.
Glad I live in Fl! as loud as we want!
Very well done video bro
Thanks for posting
Amazing talent
Hey I didn't know Linus tech tips son made car video!
@fulltiltdrift4909
3 жыл бұрын
Touché
@kendraymason
3 жыл бұрын
For real
@AznJungleFever
3 жыл бұрын
Looool oof 🤧
lol is there a difference? Sounds just as loud and as sick "silenced"
@berkinparlakay
3 жыл бұрын
not enough restriction
Sounds awsome either way
@fulltiltdrift4909
4 жыл бұрын
👍 thank you man
Much appreciated!!
Lol my mechanic told me to get a silencer for my forester that’s why I’m here 😅😅
Very nice video
@fulltiltdrift4909
5 жыл бұрын
I appreciate the support Ussop
Gipsy Danger tag- nice
Do u have a resonator?
Eso tiene un swap de motor de tractor verdad?
Thank u
Did this help with highway drone? If you had any drone before, that is... I've got a fairly conservative system, with reasonable loudness, EXCEPT for a drone right in the RPM range for highway driving. The drone disappears around 87mph (140kmh)... But not looking to get tickets
@kapoof2
3 жыл бұрын
Look into a heimholtz resonater, if you can get someone to make one for you (Has to be custom made), that is guarunteed to eliminate drone.
@an0nim11
2 жыл бұрын
@@kapoof2 What if i have factory helmholtz resonator before custom straight through muffler? Then i guess a little bit of restriction to aftermarket straight through muffler (compared to stock chamber muffler) will do a job of filling resonator better with exhaust gasses thus reducing drone at least a bit? I know its not perfect (overall exhaust tubing lenght and/or overall capacity) but need quick cheap fix to a wrong muffler decision i made recently.
I just stuffed them full of steel wool and held it in with All-Round 👍
@nuclearwinter21
5 жыл бұрын
I did the same thing to my scooter. It saves more time and money. 💙👌
@mariocasanova2456
4 жыл бұрын
Wes James what type of car do you have
@brettm3261
2 жыл бұрын
Hey Wes, what is "All-Around"? Haven't heard of that before.
@danielhofmann8699
2 жыл бұрын
@@brettm3261 I think he’s referring to duct strapping like they come in a roll usually HVAC guys will use them it’s metal strap with pre Drilles holes in them the company that makes it is DAHL.
Karen called the police 5 times on me tonight. I wasn't even at work tonight so here I am trying to keep my job
@jonathanvaldez2460
3 жыл бұрын
I'm sorry you have to deal with that. I do have to question how they survive in adulthood. Everyone will eventually hate you.
My car have a 1"5 inch straight pipe and because of that gets the "trumpet effect" and at certain rpm the car is loud as fuk. And to get through inspection it needs to be quieter at those rpm. I will definitely do this. and when it have passed the inspection I will gladly remove it again😌
Pls be my man ♥️
@fulltiltdrift4909
Жыл бұрын
Alright which one of my friends found my video? Lol
It didn’t change
Hey, your oil burning could be as simple as a blown pcv valve.
Why does everyone ls swap 240s.. what happened to putting sr20s or rb26detts in.
@fulltiltdrift4909
5 жыл бұрын
Idk, but this isn't an LS. Its a carbureted 5.0 foxbody mustang engine 👍
@kandlrex
4 жыл бұрын
400hp in a LS is cheaper than 400hp in a SR or RB
Didn’t it put pressure or any damage on engine
@briansuderman5597
3 жыл бұрын
There's no way this will damage the engine
Sounds better with baffles
Does this increase back pressure?
@fulltiltdrift4909
2 жыл бұрын
More than likely, but i havnt noticed any change
He measures a round pipe twice lol
They are homemade glasspacks
dang bro. couldn't you have used a hole saw and just grinded a little if needed?
@fulltiltdrift4909
5 жыл бұрын
You have the right idea, and I would if I could. I don't own any metal hole saws, only a few for wood and soft materials. Hole saws for fabrication are definitely on the list though 👍
@billywaltonjr.4176
3 жыл бұрын
@@fulltiltdrift4909 You can use any tool steel bit on steel or any softer metal. Just take it slow and use oil if necessary.
Pretty much just showed us how to make a homemade muffler
Has anyone ever tested this silencer and found out how HP is lost? Thank you!
@fulltiltdrift4909
2 жыл бұрын
I lost approximately 0 of my 140hp according to butt dyno 👍
You can also just like...put a muffler on...
@fulltiltdrift4909
3 жыл бұрын
Not ganna argue that
tenes que callarte y dejar que suene el auto
That's probably killed about 5-15hp and played havoc with the afr's
@WeaponLord
2 жыл бұрын
Only 5-15 HP???
Does this mess w back pressure effecting fuel efficiency?
@murphnturph2664
3 жыл бұрын
Unless you have two stroke no. Four stroke engines aren't meant to require back pressure.
@TheZohanLohan
3 жыл бұрын
@@murphnturph2664 what? Lol
She's a polluter💨
dont u still get a ticket it has to have the CArb sticker for the exhaust to be legal
@fulltiltdrift4909
5 жыл бұрын
This is a custom fabricated exhaust on an engine swapped drift car. This was more meant to keep me from getting pulled over than for an inspection.
@goclunker
5 жыл бұрын
jose palacios you don't get tickets for catbacks
@DonziGT230
4 жыл бұрын
The muffler doesn't have to be CARB approved, nothing past the catalytic converter matters for emissions. Besides, that engine is running so dirty it would get a fail just by driving past a smog machine.
@TheOneWhoisDrunk
4 жыл бұрын
CARB only relates to Fuel, Intake, headers and Cats. Noise compliance laws are only in your local laws in California and other CARB compliant states. Also if its off-road/track only there is no restrictions on mods.
😂 😂 😂 😂 😂
Yeah but your trapping a lot of the exhaust fumes
If no duct-tape is used, then I can't approve of the project. Sorry!
seems the same to me
@fulltiltdrift4909
4 жыл бұрын
Not to me
@BodyWeakDotNet
4 жыл бұрын
Right...what a waste of time
@dylanwestrand9507
4 жыл бұрын
Nah, it is a lot quieter
just buy it. only 10bucks on ebay..
I can't tell the difference.
the design is not that great ... i wouldn't do a middle empty pipe, but try close the middle hole and make it small just enough so air flows saying around half a inch diameter, and the rest of muffler exhaust should be on the sides through the meshes ... also in middle of the pipe you need to have a pattern grid much like a bee hive hexagonal shapes or similar grid and tilted at 35 degrees to stop the sound even more while still allowing for exhaust to go out. that shit will go silent dramatically .... probably up to 20% the sound we hearing now. im actually planning on making a muffler silencer for my chainsaw soon.
@fulltiltdrift4909
5 жыл бұрын
Well I appreciate the input. I'm planning on doing a better version eventually but I imagine a lot of my build will be changing once I have the resources to do it 👍
Just buy one at this point
Nobody absolutely nobody took all this time to do this besides him we all watched this video closed KZread and did sum else
@MonkeyWrenching
4 жыл бұрын
Speak for yourself
There’s no difference between them 🙂
🤦♂️🤣🤣
Also noisy 🙄
California sucks! Impressive work and video though! Sick s14 btw 😎🤙🏼
Sounds the same
what a waste of time for audibly no result whatsoever
@anthonyitaliano7316
3 жыл бұрын
Lol yeah there's maybe a 5% difference. If you want a quieter exhaust add more mufflers.
Blahblahblahblah