Really in depth and more importantly you are explaining WHY you are doing things. So many people forget about us Electronics Newbies. It's all well and good being told "put this here, then click here", but we don't learn anything that way. I'm going to be following this tutorial for sure! Not checked if you have yet, but if you could put a parts list in the description, this video would be perfect (even if they are affiliate links!).

@digiblurDIY

5 жыл бұрын

Thanks for the kind comments! And yes I included a parts list of the sensors I used. Many other choices to use as well.

@yourpalfranc

3 жыл бұрын

@@digiblurDIY I'm stumped??? Where's the list?? Thanks in advance.

@forwallz

3 жыл бұрын

@@yourpalfranc -=-=-=-=-=-=-Parts Used -=-=-=-=-=-=- NodeMCU - amzn.to/2DqS4lb TSL2561 LUX Sensor - amzn.to/3arcDgc Jumper Wires - amzn.to/2UTDDNM AM312 Motion Sensor - amzn.to/2I5HJkg 5mm Neopixel - amzn.to/2GlgtMX or 8mm Neopixel - amzn.to/2GlHb8a DHT22 Temp/Humidity - amzn.to/2I4isa7

In 2023 this may be thought of as an "Oldie, but a Goody," but it's an outstanding tutorial on ESPHome multi-sensor integration. Many thanks for your effort.

@digiblurDIY

11 ай бұрын

Wow, thanks!

What an excellent tutorial. You make the process really clear and have gone just to the right level of complexity for me to understand each step. Thanks for sharing your knowledge with us!

You sir, are one of KZread's best teachers. I love your calm voice and accent too (the opposite of my Aussie accent!). Thanks for helping me understand all this.

I just successfully programmed my first NodeMCU with ESPHome. Cannot that you enough for the lesson, really appreciate it. Now, time to buy a 3d printer.

Greatest video I have seen for exposing in and outs of HA. Good form. Great teaching skills. More awesome the product you have built. I’m amazed. I can’t wait to try one myself.

Nice intro to ESP Home. I never really used it before and your video had me up and going in no time.

Thank you Travis for another, well explained DIY video. I was going to go into more explaining of why I like your clips but I see that I am not alone as Peter Ebenezer has posted everything I was about to write. I have been into all types of electronics, and many other things as a hobby and as work. I have been watching the top 5 video makers on Home Assistant, OpenHab, ESP****. Out of the top 5, you are the only one that will go back in time to repeat and explain all the basics and the "why's". I do understand that all of this information has already been explained by all of the other video's at some point in time. My problem is that I do not want to go through a 2 hour Live video, or scn through 2 years of earlier videos to find out the very basics of how to get a sensor going. By explaining and repeating each step there are some people that will complain about that fact that the topic has already been explained 2 years ago. I do not mind hearing topics that are "old news" to me, to help the new people getting into this hobby. It takes only a few extra minutes in the entire video, and it will attract a much larger following after time. If you are not up to speed with the other groups you need to spend hours going back in time before being able to complete the project. Bottom Line,,, PLEASE continue with explaining in DETAIL each step and the "WHY's" as you have been doing. I watch just about every flick of yours and will continue. Thanks again.

@digiblurDIY

5 жыл бұрын

Wow! Your comments make it all worth it doing this journey of making How To videos sharing projects. I've always tried to make a video that I wanted to have when I was learning to throw up on the 2nd screen or tablet, pausing as I go. I figure if someone has already seen a part they can always fast forward around. I'm glad you enjoy the videos!

Excellent video, wish I had seen this before I started. Look forward to watching you new and old videos.

Spent last 10+ days trying to get head around HA and Tasmota...after many many attempts and hours of videos I finally have a handful of switches and plugs 'flashed' over. Great hard bit done I thought and just drop them into HA and have done with it. Nope. Couldn't get it. MQTT problems, syntax errors, authorisation issues, rebuilds etc. etc was at my whits end and the W.A.F at an all time low... Then I stumbled here....wow! I've picked up more just watching 10mins of your videos (not even meant to be configuration 'tutorials'!) than any of the half dozen I've struggled through these last few days. Thank you sir from a decidedly damp UK - subscribed :-)

@digiblurDIY

5 жыл бұрын

Much appreciated! Glad you were able to utilize my bit of ramblings to fix things. I usually try to show a project I've done in the house and teach a few things while doing the project. I sometimes refer back to my own videos for content.

@richyread2011

5 жыл бұрын

@@digiblurDIY Well certainly for me your videos were my 'light bulb' moment {excuse the terrible pun!} Much appreciated.

@digiblurDIY

5 жыл бұрын

Awesome! The pun definitely fits! If you have any content you'd like to see feel free to let me know. Come join us on the discord chat as well if you haven't already. discord.gg/bNtTF2v

THANKS Travis! Excellent work. I had to set SSL to 'true' and open port 6052 on my WiFi 'router', but this got me to the Compile and Upload stage so far....

Thanks a lot! This is exactly what I needed. I was going to rewrite BRUHs whole C code to get things working properly. Thanks to you I could just flash ESPHome and configure the sensors. This keeps things simple and I don't have to mess around with C code.

@digiblurDIY

4 жыл бұрын

Still have an old modified forked Bruh code multisensor I did a good while back running. I'll probably do a swap on it and upgrade to ESP32 soon.

Awesome video Travis, I never even looked into esphome before, assuming it was just a bunch of code I had to figure out and get working like everything else, but watching your videos, it really makes things easy to understand... Thanks Travis

@digiblurDIY

4 жыл бұрын

Glad I could help! It's cool to use for a few different projects and have choices.

Man you really just cleared up a lot of stuff for me I'm new to all of this but it's all pretty simple to me. There's a lot of gaps I still need to bridge though and I really want to thank you for doing that you just showed me a lot of the stuff I was wondering how to do.

@digiblurDIY

3 жыл бұрын

Thanks!

Awesome video man, finally getting back to home automation stuff since the flood back in June. Thanks for the video man ~ Johnny Danger

Thank you very much for this video. I have been researching and procrastinating and you have now shown me that I too can do this. So grateful

@digiblurDIY

3 жыл бұрын

So glad it helps. It is addicting to make some crazy cheap sensors.

LOVE IT! been imagining such a sensor cluster. And here it is step by step. Thank you very much!

I never would have been able to do this by myself. The explanation as to the why, and not just “do this, do that” really helped. I was able to set up my outdoor thermometer with temp and humidity, which is something I’ve been wanting to do for a long time, and until I saw your video, I didn’t think it could be done. This is now the second time I follow your instructions on a project, since I really started getting into the tinkering in July. By the way, in case this happens to someone else, when I was about to flash for the first time, the USB wasn’t being recognized. In the ESPHome instructions, it shows they you may have to restart the add on, for it to recognize the USB connection. After the second restart, it saw my usb connection and the flash was flawless. I also didn’t have to add the IP address when configuring the add on. Thanks for another great video!

@digiblurDIY

3 жыл бұрын

Thanks! It makes my stuff a little longer but I do like to show the why especially for people to adapt the projects and make it their own. Glad you enjoyed it!

@fantasma62

3 жыл бұрын

And will continue to enjoy...you are absolutely at fault for me getting hooked. See you on Discord! (Once my old brain figures it out)

Thats really cool, and sooooo much easier then dealing with Arduino

As always, amazing video by the boss! :)

This is an awesome project and the video explains so well you understand how it works and can add more sensors, i added an atmospheric pressure sensor so i know if it's going to rain, so i have used bus a and bus b which i learned how to read thanks to you, now i'm going for the 2nd and 3rd sensor box . Thanks a lot

Great! Thanks for this Travis!

this was ridiculously easy to follow through. thank you so much for doing this video!

@digiblurDIY

3 жыл бұрын

Glad it was helpful!

Well and clear video, well done! I've been using ESPhome on my DIY dimmer boards using the ESP32 and it's really great to work with once you get the hang of it. It also provides the best integration with Home Assistant you could wish for.

@digiblurDIY

5 жыл бұрын

Thanks! And I fully agree, Otto has done some great work in the ecosystem. Compiling in only what you need, automations, sensors and then on top of that making it all work with the esp32 as well. I love all the options we have out here to flash on the various ESP chips.

Thanks for this, I tried to build almost this exact sensor yesterday, but had trouble with the DHT22 reading 1 or NaN for both temperature and humidity. Using the model keyword sorted my problem.

Such a great tutorial. You are a legend

keep up the nice work! Verry well explained!! 😁

Thanks for all the awesomely informative videos!!!!

@digiblurDIY

3 жыл бұрын

Glad you like them!

Excellent job.. Thanks again for your time here..

@digiblurDIY

3 жыл бұрын

My pleasure!

Thank you for this. I spent ages fighting MQTT to integrate some simple DHT22 sensors on a ESP8266 board into Home Assistant. After watching this, I managed it in 5 minutes ;) Now to go an splurge on some more sensors and monitor all the things...

@digiblurDIY

4 жыл бұрын

Excellent! It is addicting with all the sensor options!

@chrisward6296

4 жыл бұрын

@@digiblurDIY Did you have any problems running the NeoPixels? I can not get them to work following your instructions. The data sheet states that they need a 4.5-5V on the data pin, but the ESP8266 only has 3.3V data pins?

Awesome and throrouh video. I can already see a use for that lux sensor. thanx again

@digiblurDIY

4 жыл бұрын

You bet!

Wonderful!!! Thank you for explaining in very easy way.

@digiblurDIY

3 жыл бұрын

Glad it was helpful!

Thanks for this, GOOD explanation for a long time! Cheers

@digiblurDIY

3 жыл бұрын

My pleasure!

Finally got the last components, the Adafruit led's took a LOOOONG time to arrive. I've gotten three built, darned it's tight space in the box, I've had to cut the wires, and solder them instead of the cableconnectors, and also cut the pins from the DHT22 to get it at least a bit flush, but now they look really nice, and works perfectly. I do have an issue with the lux sensor, it's a bit recessed, so I'll have to experiment with the placement of the sensor. Thankyou very much for this excellent kit!

@digiblurDIY

5 жыл бұрын

Yes it can be a chore to make it fit in the case all correctly, I've seen some other cube style ones on Thingiverse I'm going to try for my next one that has a bit more room to make it easier. Tempted to throw a BME280 I have just off the back of it away from things a bit as that sensor is super sensitive to temperature changes.

@kennethfribert6074

5 жыл бұрын

@@digiblurDIY I can imagine, it would be a cool last piece of sensor :-)

amazing video thank you so much for all the great tips 🙏🏻

@digiblurDIY

7 ай бұрын

Glad it was helpful!

Very good video, very well explained.

Great video, every thing explained very well. Thanks

@digiblurDIY

4 жыл бұрын

Glad you enjoyed it!

excellent, thanks for sharing!

Great video. ☺️

Very good tutorial! I managed to get it working by following it. One problem with the design, though. The LED might influence the light sensing sensor. Thank you!!

@digiblurDIY

4 жыл бұрын

Yep. Keep the led low.

Best explanation that I understand! Thank you

@digiblurDIY

3 жыл бұрын

Great to hear!

Wow execelent explanation! Thanks

@digiblurDIY

2 жыл бұрын

Glad it was helpful!

Excellent Video Thx a lot

Great one. Thanks a lot.

awesome man thank you

Super vidéo ! J'ai acheté un applaudissement à 5,00 € 👏👏

best demo that I have seen using ESPHome and Home Assitant. Can you also also add a IR Tx Sensor to this bundle

@digiblurDIY

5 жыл бұрын

Absolutely, this is basically a base to get your feet wet and add whatever sensors you want to make it fit your needs.

Travis, yet another great video. Thanks for the effort. Can you use a D1mini instead of NODEMCU

@digiblurDIY

5 жыл бұрын

Absolutely, I even mentioned it in the initial setup as it is in the board list. The project supports pretty much anything you can install the program on that is esp8266/esp8285 or esp32 based.

Great video Travis! ESPHome definitely looks like a simple enough interface to bring all these sensors together. I'll have to try it - and probably get some help with it from you ;) - when I put the new version of my Kube multi-sensor together - I'm going to make it work with ESPEasy for a start, since I already wrote a plugin for it to work with the TE AmbiMate sensor board, but I'm wondering how hard it would be to make that board work with ESPHome, as well (it is I2C though it requires some specific messages back/forth to get the data). Keep up the good work!

@digiblurDIY

5 жыл бұрын

Definitely hit me up! Had to look those sensor boards up and they are pretty cool! Love some i2c!

LOL your microphone is very good. Your keystrokes are very subtly coming out of my subwoofer. Scared the hell out of me at first - it's so subtle and such a weird noise.

@digiblurDIY

5 жыл бұрын

I noticed that as well last night during a playback on a better sound system. Thanks for the confirmation as I will make some adjustments to isolate things.

Nice !

Klasse erklärt.

Big like Thanks alot

Another great video from digiblurDIY! I did have an issue with the Hassio Add-on seeing the Node MCU USB. Finally got the Raspberry Pi (my host) to recognize the NodeMCU plugged into it, however still could not flash over the USB; would not connect. I had to use the Hassio ESPhome add-on to create a new .bin file and then move it over to my windows machine and flash the NodeMCU using esphome-flasher. Seems there is something I am missing to get the usb to mount properly in the Raspberry Pi host. But all is well. In the Hassio Add-on ESPHome, I created a new device using the setup wizard, I then edited the .yaml file to add in the static IP information. I then compiled the new device from the Hassio Add-on ESPHome GUI and then downloaded the file, moving it over to my windows machine. I then took that bin file and flashed the NodeMCU using esphome-flasher, and bam....went right online in the Hassio ESPHome GUI.

@digiblurDIY

4 жыл бұрын

Thanks! Yep, that's the issue I have on my docker core setup as I would have to pass that usb in each time and it becomes a pain. I just use the method you described and is much easier to just pull the bin over to my main machine and flash it that first time.

I finally got around to building my own Multisensor with ESPHome. Worked like a charm. Only issue I ran into was that one of my GROUND terminals on the NodeMCU did not work. So I had to make a jumper so I could ground two sensors to the same terminal on the board. I was going to put two motion detectors on the Multisensor (using two different GPIO pins), but I think I did something wrong and the "magic smoke" got out of one of my AM312's and it doesn't work anymore :( Either way, the Multisensor is a great project in ESPHome. Looking forward to writing some automations based on motion, lux and even temp/humidity. Thanks @digiblurDIY

@digiblurDIY

3 жыл бұрын

That sucks about the smoke. Luckily they aren't too expensive. Have several of these around the house for automated lighting.

A quick note for anyone using this tutorial. You may need to restart the esphomeyaml after connecting a board to upload to if doing so over USB.

@robertpoynton9923

4 жыл бұрын

thanks for the heads up. but I still can't get it to work. the only option that it's giving me is OTA

@JohnsDIYPlayground

4 жыл бұрын

@@robertpoynton9923 If all else fails, reboot your Home Assistant, and then before programming your node, hold the "boot" button on the node and continue to hold while doing a momentary press of the "EN" or reset button. Then release the boot button. One other semi-random thing is try a different USB cable. Some of the cheaper cables seem to be for charging devices only, and don't have the data in/out lines working in them.

Man I’ve seen this video several times and I learn something new each time I see it. Thanks for sharing. Is there any advantage to use and I2C sensor, sorry if it is and stupid question.

@digiblurDIY

4 жыл бұрын

Nah.. Not stupid. I2C is usually just a tried and true protocol for integrated circuits doing sensors.

Hi, Thanks! very helpful, i noticed you did not use any MQTT configuration?

@digiblurDIY

5 жыл бұрын

Correct. I used the API. Mqtt is an option though. I wanted to show how to do it differently with different software to folks. Adds those additonal tools to the mind for solving home automation issues.

Great video, though the sensor gets a bit more expensive with this :-) And of course I have to order new components :-D

@digiblurDIY

5 жыл бұрын

Yes it can depending on where you get the components from. Of course you don't have to use all the ones I did as wanted to show how flexible and easy Esphome was to make all your custom builds.

I'm working on building a number of ESP32 media player units and adding some of these sensors would save money, I would think.

Connect the ESP to where your Home Assistant (HA) is installed on... (rasp pi but using web interface of HA from a PC)... if you still don't see the second option in the upper right for "xxxx/ttyUSBx", restart ESPHome from within HA and refresh the PC browser.

Thank you for the ESPHome videos. I am finding myself incredibly inspired by how quickly I can configure a new sensor. In fact I went a little wild and converted all of my SonOff plugs, and then did an ESP32 BLE hub (to bring outside MiFlora sensors into HA), and an ESP8285 Dog Water Bowl sensor. :D I have run into a problem with the SonOff S31 plugs though. If I enable the cse7766 power sensor then the plug stops reporting and is seen as offline by HA, and on my high quality metal floor fan I can hear the motor groan when the relay is toggled momentarily. The plugs work perfectly if I disable the sensor. Seeing you add an "update_interval" to your sensors makes me think that is worth a try. I was wondering if maybe it was freezing up because it is trying to push through more data than the chip can handle.

@brian.hanifin

5 жыл бұрын

Nevermind. I just checked the documentation and update_interval defaults to 60 seconds. So that shouldn't be the problem.

Very good and well explained video, congratulations, and the question I have is, what is the action that will be taken after the motion sensor is triggered , if you are going to turn on a light for some time, how the lite can be kept on while this pir sensor detects motion

@digiblurDIY

5 жыл бұрын

You'd have to create an automation with delay for the time period you want to turn the light on. esphome.io/guides/automations.html#delay-action

Fantastic video just learnt so much, just started using esp home. With the sensors would you recommend a maximum cable distance from the sensor to the node mcu? Voltage drop will play a part at some point i guess

@digiblurDIY

2 жыл бұрын

I can't say I've used more than 12 to 16 inches from the nodemcu on projects.

following this video can i add a switch when pir tripped but switch is in ha not in esphome config file on_press: then: - switch.turn_on:switch.kitchen_lights on_release: then: - switch.turn_off:switch.kitchen_lights thanks

Thanks you for another great video! One question like to ask; when we assign static ip, should we always use the ip outside the DHCP.

@digiblurDIY

5 жыл бұрын

That does depend on the router as some as smart enough to not try to double issue an IP. But since I have used routers like this I always assign them outside the dhcp scope just to be safe.

@jackywoo4975

5 жыл бұрын

@@digiblurDIY Thanks very much!

Thanks for the video, can't wait to try this! Also, digiblur from SDX or nah?

@digiblurDIY

5 жыл бұрын

SDX short for something?

@4512jth

5 жыл бұрын

@@digiblurDIY SDX Developers. But actually I might just have recognized your name from S4GRU it seems. Anyways, thanks for the video!

@digiblurDIY

5 жыл бұрын

Used to do things on XDA and S4GRU as well. Small world.

Great video, Travis! Just a quick question: Do you tink that the DHT22 temperature values will be influenced by node MCH heat inside the box? And neopixel led, when on, will influence the lux sensor value?

@digiblurDIY

5 жыл бұрын

Potentially yes as heat rises. If that's an issue I would opt for a larger case. I do plan on putting another sensor next to it to test but in my testing of sensors side by side you question which one is right.

got everything all set up and working great. Thank you for your detailed explanation the only question that I have is how do I set up the led for motion? I can turn it on and off and change the color but would like to turn it on and to blue when motion is detected. any help out be greatly appreciated.

@digiblurDIY

4 жыл бұрын

You can make the automation on the device itself, HA or NodeRed. I use this to turn the led on with motion on the wemos. binary_sensor: - platform: gpio pin: D2 name: ${display_name} Motion device_class: motion on_press: then: - light.turn_on: ESPD4led on_release: then: - light.turn_off: ESPD4led

I wish someone would come up with a wizard-like configuration suite for ESPHome/Tasmota. I love iot stuff, but the amount of configuration involved is offputting to me. Even a GUI to view Tasmota rules and use a few dropdowns to change parameters would be game changing.

hej, how does one attach a push button to this thing and to HA, latching and non latching

Thanks for this! What version(s) of NodeMCU board are your linked 3D cases for?

@digiblurDIY

4 жыл бұрын

I use the breadboard friendly ones. Not really a version of them as there so many different names/numbers with all the different boards.

I am working on a similar project but with ESP32 board and enabling also Bluetooth BLE scanning. Instead of DHT22, I am using a sensor HTU21D which has pretty accurate readings the only problem is that after some X time it starts to report always the same value. I did a duplicate setup of the first one and the same issue appears, not sure what's causing this. The other sensors light (TEMT6000) and the RGB led remains responsive and work as should. Would be easier to move to DHT22 I think.

can you post some information about your energy monitoring? it looks neat.

@digiblurDIY

5 жыл бұрын

Yes I do have that in the works!

Great tutorial and well explained! I managed to get all 3 sensors working with wemos d1 mini, however pir sensor always giving me "detected" state... any idea what could be?

@digiblurDIY

3 жыл бұрын

I would pull the PIR and try to toggle it via gnd.

Very nice video! I got a question. Is it possible to add Wled control to this configuration?

@digiblurDIY

4 жыл бұрын

You can flash it with any firmware you want.

thanks for the vid,, it looks very easy...Do you know if its has Rules and can operate a MCP23017 ... looking through the site I do not see it... also after its up and running does it has a web UI like tasmota so you can look at all devices that are connected to the pins?

@digiblurDIY

5 жыл бұрын

Looks like the closest you can get to that chip is the esphome.io/components/pcf8574.html I don't have one to know if it can be seen on the web UI. I had two segments showing a couple internal rules but I had to cut them due to length.

If this video had included a parts list, I'd give it a 10!!! Without it, I'm giving it a 7.5. Maybe 8?? ~Frank

@digiblurDIY

3 жыл бұрын

Sounds like your KZread doesn't have a video description, definitely give that a 2 out of 10.

@yourpalfranc

3 жыл бұрын

@@digiblurDIY My apology, sir. Maybe I needed to refresh the page, because I do see it now. I'm not as young as I used to be. 10! ~Frank

@digiblurDIY

3 жыл бұрын

All good! No apology necessary. Always fun to shoot a little odd humor around.

Hi, great video again! I have some basic things like the Led Strip. For now these devices are controlled by Node-RED in MQTT, now with ESPHome, do you think there is a way to control these devices with the "Home Assistant" nodes? Thanks and thanks for videos.

@digiblurDIY

5 жыл бұрын

Yes, as long as you have it configured in Home Assistant you can control it in NodeRed.

@Cinemaaereo

5 жыл бұрын

@@digiblurDIY Thanks man. I read in the documentation of ESPhome that there is a way to enable mqtt on the some sensors, in your opinion, is it better to enable mqtt to use it in NODE-RED or better to use as Nodes "Home Assistant" in Node-RED? Do you have any videos showing Node-RED without mqtt? I searched but did not find. Thanks again!

Hi mate thanks for this great video. You say first sensor should be activated with usb attached to hassio system. I'm using a virtualized hassio, should I pass a usb port from the host to the hassio guest VM in order to follow your guidelines? Thanks for all your great work.

@digiblurDIY

3 жыл бұрын

You don't have to. I just compile the bin using the interface there. Download it and flash it with my local computer. Then once it is on the network, all future changes are done over the air.

Hi, I've got a 8 pixel bar LED, how can I control each LED as though it was a seperate light with three channels? I can get it setup as a block by telling ESP that it has 8 pixels, but can't seem to work out how to expose each LED separately... Any ideas? thanks

Thank you for this video , I made 6 of this sensors and now working to create a new 3D printed enclosure and to include a SSD1306 , even if not really needed but it will be nice to have it on my new enclosure. The problem is how to add the display to this configuration? Thanks

@digiblurDIY

4 жыл бұрын

Have you followed this? esphome.io/components/display/ssd1306.html?highlight=ssd1306

Wow. Awesome step by step video !! I just wanted to know, how to revert to normal NodeMCU firmware? Like, remove the firmware which the home assistant flashed and restore the original NodeMCU firmware. Thanks

@digiblurDIY

3 жыл бұрын

You would need to back it up first but usually it's just a test pin firmware for factory testing.

@PiyushNikam

3 жыл бұрын

@@digiblurDIY can you please tell me how to do that? Or atleast suggest any video or article on how to do that? Thanks !

@digiblurDIY

3 жыл бұрын

Video wise.. Hmm.. I did it somewhere in the live stream of the POWR3 but this article talks about it. tasmota.github.io/docs/Esptool/

@PiyushNikam

3 жыл бұрын

@@digiblurDIY thanks a lot man !

Bonjour Svp pourrez-vous faire un tutoriel sur la configuration d'un capteur pzem-004t dans esphome ? Merci d'avance

Thank you very much for the video. Starter question: With a completely new NodeMCU, when you say in min 1:55 to attach with USB, you mean connect a USB cable from the computer to the USB of the NodeMCU?

@digiblurDIY

4 жыл бұрын

Yes, connect a usb cable with proper data and power lines to either your computer or Rpi.

@JohnsDIYPlayground

4 жыл бұрын

You would connect the NodeMCU to whatever system is running your Home Assistant with ESPHome on it. I screwed this up several times in the past by plugging a new device into my PC thinking it would work... until it dawned on me I need to have it plugged into my Raspberry Pi running HA / ESPHome. Also, if it doesn't see your device hooked to the USB port, try and restart the ESPHome add-on. It seems to help detect new devices on the USB ports if not automatically.

Does the PIR have any better function on 5v vs 3v3? I have 1 that doesn't detect as well as I think it should.

@digiblurDIY

5 жыл бұрын

Not that I have found as it has a voltage regulator anyways. Mainly done since it can use 5vdc and other things needed the 3.3 pins.

Great Video...this work on wemos d1 mini?

@digiblurDIY

4 жыл бұрын

Yes it does, just have to figure out a way to join the gnds and 3v3s.

Hello, i'm trying to do this via automation, i would like to create a rule taking advantage of an rgb led i have working. If temperature is below 10c then light blue If temperature is between 11c and 22c then light white if temperature is above 23c, then light red. Help

Thanks for a great video. I used the 5mm Neopixel LED with a Ultrasonic distance sensor to create a parking assistant and it worked great. Now I'm trying to create a second one but I cannot get the Neopixel LED to display the correct color unless it connected either directly to the breadboard or with cable no longer that 8-inches. If the cable is longer, the colors are just random. My setup is to change the light to GREEN when its safe to stop, ORANGE when getting too close for comfort and RED if it way-too close. Any suggestion would be greatly appreciated. I've tried different cables, NodeMCU ESP8266, breadboard and Neopixel LED, but all with the same random lights if the cables are longer.

@digiblurDIY

3 жыл бұрын

That's usually due to the voltage drop of data signal. You might need to do a 5v level shifter and run the LEDs at 5v power and shift the 3v3 data line up to 5v.

I'd love to see a video on how to automate this so the light turns on when there is motion but only when the light in the room is low. Or have you already done that?

@digiblurDIY

5 жыл бұрын

Have you looked at the NodeRed series? I showed how I did this with lights.

@robertpoynton9923

5 жыл бұрын

@@digiblurDIY Ok mate I will look at it now. Love your work mate. Cheers for Australia

Have you got or can you recomend a video on filters and calibration? I have lots of DHT22's that all read different temps when side by side....? Thanks

@digiblurDIY

4 жыл бұрын

That's the nature of the beast with those DHT22's or really any temperature sensor. You can try to calibrate them but the calibration really isn't linear. Here's what I've used before: esphome.io/components/sensor/index.html#sensor-filters

Hi As a newbie I am a little confused. When you set a static IP address do you first have to log into your router and set the static ip there or is it all done within the sensor yaml file. Enjoyed your video.

@digiblurDIY

4 жыл бұрын

No. I am setting the static IP in the esphome device itself outside of my DHCP scope my router gives out IPs.

For ultrasonic sensor type JSN-SR04T cannot be used with current ESPHome distribution?

@digiblurDIY

5 жыл бұрын

If it isn't in the documentation then maybe check their github under issues or pull requests to see if anyone is working on it.

Awesome Video! I'm trying to do a version of this with a D1 mini. I purchased the same PIR sensor that you are using. When i get everything wired up the PIR sensor just reads motion detected. it never goes clear. I have tried pins D3 and D4. any ideas what I'm doing wrong?

@digiblurDIY

5 жыл бұрын

Have you tried other pins? I know the D4 has an external pull up resistor and might stop it from pulling down.

@michaelsalomonson8886

5 жыл бұрын

Yep that was it! Of course the two pins I tried both had pull up resistors. Tried a third pin and it worked like a charm!

Hey Travis, this was again, a great tutorial that was so easy that an idiot like me could follow it. I do have a question...is there a way to calibrate these sensors? The humidity has always worked well, but the temperature , which was correct at the start, is no longer working correctly. I’m hoping that maybe there’s a way to calibrate this sensor so that it works correctly again. Thanks again for all you do.

@digiblurDIY

3 жыл бұрын

Yes, you could always apply a sensor filter to change any values as needed - esphome.io/components/sensor/index.html?highlight=filters#sensor-filters

@fantasma62

3 жыл бұрын

@@digiblurDIY thank you very much! It’s amazing how much can be done with threes little devices.

Hello Travis, Does the clamp output an AC sine wave, and if it does, would the negative voltage affect the board when you connect it to A0. Would it be necessary to rectify the clamp output to DC before feeding it to A0 or would that be unnecessary.

@digiblurDIY

5 жыл бұрын

You could do that as I have worked with some clamps in other fields that had a 1v-5vdc output. The current implementation of the CT clamp sensor in Esphome uses emonlib based off of adding a DC bias to the signal. learn.openenergymonitor.org/electricity-monitoring/ct-sensors/interface-with-arduino

What size was the LED you used in your video 5mm or 8mm looks pretty big ? Thanks

@digiblurDIY

5 жыл бұрын

I used the 5mm size.

When loading the card, do you connect the card to the device where the home assistant is installed?

@digiblurDIY

4 жыл бұрын

Yes, or you can download the bin file and flash it with your computer.

Just to be clear - the USB connection for a first time flash, that's to the HA server, right? Not to the machine you are accessing the front end from?

@digiblurDIY

5 жыл бұрын

correct, it was on my machine I had the esphome GUI running on. You can also hit compile on the GUI then hit the download binary button and send the BIN file over with other means to the nodemcu.

Hello, thanks for the video its better than Arduino IDE programming, can I switch the motion sensor for aa an air quality sensor its gona be better I guess what do you think guys?

@digiblurDIY

4 жыл бұрын

Yes, of course. There are quite a few sensors supported by ESPHome as well as you can bring in regular libraries as well.