DIY: E-11 Stormtrooper Blaster Rifle - Lair of the Visionary
Тәжірибелік нұсқаулар және стиль
Rogue One: A Star Wars Story has just recently hit theaters, so in honor of It's release let's make the imperial stormtroopers E-11 blaster rifle.
Link to templates:tj-jazz.deviantart.com/art/E-1...
Пікірлер: 101
this is literary the best tutorial to make one of these that ive seen as its made from cheap materials
@lairofthevisionary5788
7 жыл бұрын
Thank you, I'm glad you like it.
Great in depth tutorial and the materials are cheap 12/10 would recommend!
@lairofthevisionary5788
3 жыл бұрын
Lord Jar Jar, It's an honor.
Hey Lair of the Visionary you're ways of making star wars stuff is actually easy enough for me to follow and make! Yay! Thanks!
@lairofthevisionary5788
7 жыл бұрын
Cool, you're welcome.
Nice little winter project. Thank you
Amazing job. Will be using this in a couple months
I love that the materials are so simple to get yet the blaster looks awesomely made. Well done! I enjoy your channel.
@lairofthevisionary5788
6 жыл бұрын
Thanks, friend.
I’m making this for school lol they better appreciate the hard work I put into this
Fantastic! Thx a lot for sharing this!!!
The Force is great in your mind. Better than expected.
VERY good and helpful video
Great job! Again.
This is perfect for the build I'm planing. Thank you.
Your video is so cool! Tomorrow i will try to do it!
This also might serve as a good basis for a DH-17 blaster pistol. Seeing that both the E-11 and DH-17 were made from the Sterling L2A3 sub-machine gun.
@lairofthevisionary5788
6 жыл бұрын
It's funny you should mention that I'm actually working on a DH-17 as we speak.
Nice model.... and it shoots too. :)
Finally... A DIY video for mortals
its close to halloween and this blaster is awesome with my costume
Love your Videos
That is the best tutorial i've ever seen, thank you so much
The top of the foam piece is flush with the 2 sides of the cardboard handles. But when you cut the hole to insert the handle, the foam is longer at the top to insert in the tube. So I guess I need to make it longer?
Nice video!
Very good tutorial
Very good tutorial, I finished this today, it was good fun. As a suggestion, instead of popsicle sticks on the end of the barrel, I used pvc foam strips (from a yoga mat), I think they work pretty well. You are the best bro, great work!!!
Great job!
@lairofthevisionary5788
7 жыл бұрын
Thanks.
Tysm for this tutorial!
2:14. Da Force
nice,this is the video i ws searching for
Sweet!
dude I just binged all your videos .I need more!!!
@lairofthevisionary5788
7 жыл бұрын
My next episode should be coming sometime during early January and let's just say I'll hopefully be making the helmet of a certain iconic sith lord. ;)
It’s Extra cool
Wow can't wait making this!!! I subbed how do you not have more subscribers
@lairofthevisionary5788
7 жыл бұрын
Well to be fair I only started youtube recently, but I really appreciate the support. :)
@ER-yd3mn
7 жыл бұрын
Lair of the Visionary oh well you r doing very well
@lairofthevisionary5788
7 жыл бұрын
ER9 Riches Thank you.
@hankster4849
3 жыл бұрын
Well he has 4.35k in 2021 so he has a lot more subscribers than then.
Thanks to you I made an E-11 blaster hehe
@Emir.Balaban
3 жыл бұрын
yakaladım seni tarık abi
Good tutorial
great!!! thanks a lot
"Have we hit anythibg with these guns?"
I did it and painted it blue and pink
That's amazing
AMAZING!!!!!:)) you saved me SOOOO much money!!! Thank you and i will credit you in my movie for the gun!!!!!!!!!
@lairofthevisionary5788
6 жыл бұрын
Happy to have been of some help. Also thank you, I feel honored to be credited.
How long is the Tube? wondering so I can start building thanks!
@lairofthevisionary5788
6 жыл бұрын
Both tubes I used to make the barrel were about 19 and a half cm in length until I glued them together, so overall you'll want the barrel length to be about 39cm.
@celestialchoc
6 жыл бұрын
Finished!
@alainzheng1008
6 жыл бұрын
Nice!
Very nice, my father did this blaster, trank you because this video help him so much!
@lairofthevisionary5788
5 жыл бұрын
You're very welcome :)
good job ....... i love you
Not bad
how long is the paper tubes going to be im using a gift wrap tube
@lairofthevisionary5788
7 жыл бұрын
Well if the gift wrap tube is long enough you'll only need one tube that's 39cm in length. Now for me because I didn't have a long enough paper towel tube I had to glue two together.
Thank you so much i think i got some of this materials laying around my house :)
what did you use for the inside of the barrel not the silver part the inside part at 6.48
@lairofthevisionary5788
7 жыл бұрын
That was just a paint bottle I shoved down the tube. In hindsight I probably should have mentioned that in the video. Whoops.
@craigchrist3857
7 жыл бұрын
That's ok a was just thinking of a thin cardboard tube that's all xD but thank you and great video I am going to make two blaster one for a m8 of mine
@lairofthevisionary5788
7 жыл бұрын
Cool.
Can the tubes be of a different size? Thanks!
@lairofthevisionary5788
6 жыл бұрын
I guess if it works out for you in the end.
Please try to make that batman mask we see it looks really good! And this inspired me to make my own
It fits well with my storm trooper costume
@lairofthevisionary5788
7 жыл бұрын
Glad to hear it. :)
I'm crying because its star wars day tomorrow for me at school and I've got no star wars costumes
1000th sub! Also, if you start getting bigger, you'll need to change the music before you get copyrighted.
2:13 YOU HAVE THE FORCE!!??
How do I get the template for the blaster?
@MrDuck.123
Жыл бұрын
It's in the link
Battlefront has taught me a lot about star wars weaponry. XB1 Gamertag: SolarisPhaZe
@arfinabout4752
7 жыл бұрын
Wanna play sometime on xb1 gt:xTheLoneJackalx
@Sol6ris
7 жыл бұрын
Sure ill add you
@tccdurt9060
6 жыл бұрын
Can I play with u I’m on xb1 : OLIVER TKD7
just a question: my template printed out, and they were smaller than their indicated measurements. How can I print them out with the good sizes?
@lairofthevisionary5788
6 жыл бұрын
Have you tried printing them out in the Fit to Page setting? Let me know if that works.
mentos container lol good end result though
@lairofthevisionary5788
7 жыл бұрын
Thanks.
How do u find the template?
@lairofthevisionary5788
4 жыл бұрын
Paul Ramone It's in the description.
@paulramone889
4 жыл бұрын
Lair of the Visionary oops. Sorry
How thick is the eva foam?
@warriorsheartcosplay3016
2 жыл бұрын
Looks like a standard half-inch thick floor mat.
2:49 you could also use that to make deathtrooper blaster
I expected it to shoot...
Then
Please Luke\Anakin lightsaber
@lairofthevisionary5788
7 жыл бұрын
It's on my to-do list.
ood the am n
Swbf yeaa
He kinda sounds like derick savage
6:56 No wonder stormtroopers can't aim. Their guns aren't even accurate.