kzread.info/dron/XOJh7y-CZ-6LO9ne7sQQ5Q.html

Thought about building one myself, watched this, now i'm looking to buy one lol. Awesome though!

@hopecarter1

Жыл бұрын

😂

@johnmcguire9501

Жыл бұрын

😂😂😂

@prtbone78

Жыл бұрын

Hahaha😂

@user-wc5ex7cu7p

Жыл бұрын

😂😂😂 this alone tells me what I need to know

@arshanakishnan2573

5 ай бұрын

I feel u bro. Came here looking on how to, m planning on who to ask instead.

Nice job, especially for us that do not have all the fancy tools!

I saw a few asking for measurements and I don't see any here. This is what I figured for my kennel: Kennel size: ~31"Lx20"Wx21"H *note: these are exact board measurements. I know 1x4's are not really 4" wide but I used leftover wood-textured trim for mine and these are the exact sizes of boards I used* Cut 4-1x3 1/2" boards at 22.5" for corner sides Cut 4-1x2 1/2" boards at 22.5" for corner sides Cut 4-1x2 1/2" boards at 33.5" for box top and bottom long edges (max size board for the front door to open) Cut 4-1x2 1/2" boards at 21.5" for box top and bottom short side edges (max size board for the door to open) Cut 3/4" plywood or MDF wood at 36"x25" which gives a 1" overhang on all sides. If you want it on three sides only to sit flush against the wall, cut it at 36"x24" Your choice of edging to go around the top I actually used extra trim from my house for my cover so you'll have to make sure if you use regular boards it will be the same size. My trim is 3/4" thick and I happened to just have enough to make the cover! LOL! The top I made flush with the back instead of doing a 1" overhang all around and it sits well against my wall. It was fast to build and can be done by a beginner as long as they watch the video closely so they know which sides the wider boards go on. It looks great! Thank you for your video!

That’s was pretty cool an awesome to learn

This is awesome.

Great job!!

I’m so impressed

Great idea

That’s clever!! Love this idea🙌🏻

@DesignCo_two4

9 ай бұрын

Thank you!

Great idea, easier to remove the crate and clean

Good job

Thanks for idea!

Amazing

Yooooooooo!!!! this was good!

Brilliant narration

@DesignCo_two4

3 жыл бұрын

Thank you

I built something almost identical. But I left the bottom board off on the door end so I can pull the tray out if needed. Is that something you considered? I used birch for the top, what did you use?

@DesignCo_two4

2 жыл бұрын

I used maple. I thought about that but didn't want to disrupt the symmetry. It's very easy to lift off the unit to clean tray if need be.

Do you have any plans, supply list? Love this idea!!

@DesignCo_two4

2 жыл бұрын

Take a look at the pinned comment above 😃

Also that tool at the end the adapter you put on the clap for the holes please

@DesignCo_two4

Жыл бұрын

www.instructables.com/Kennel-Cover/

I really want to make one of these but I’m trying to figure out how I can build it but with two crates

@DesignCo_two4

Жыл бұрын

I can design one for you and make plans for 250

Could you use different size boards if you don’t have a table saw?

@DesignCo_two4

Жыл бұрын

Of course! You will just have to make sure there is clearance for the door to swing freely.

What was the thickness of the boards you used?

@DesignCo_two4

2 жыл бұрын

Those are 1x4's.

What’s that adapter you put on your drill to make those pilot holes bigger?

@DesignCo_two4

Жыл бұрын

That's a countersink drill bit.

@MarianneMatos407

Жыл бұрын

Thank you very much still learning! 😊

How much over hang did you have for the top? Also what is the thickness of the top?

@DesignCo_two4

2 жыл бұрын

I did an inch but do whatever you think looks nice 🙂

What size is the dog kennel you used?

@DesignCo_two4

2 жыл бұрын

Medium kennel.

How wide did you cut the wood for the frame?

@DesignCo_two4

2 жыл бұрын

The width is determined by the kennel. In this situation I believe it was 20".

Home Depot will cut the wood if you provide measurements

@mercinary11

2 жыл бұрын

Not always the best or most accurate cut

@ashleybailey5473

2 жыл бұрын

They also only cut lengths

Do you have a supply list for this ??

@DesignCo_two4

2 жыл бұрын

imgur.com/a/lvoFl4J

@DesignCo_two4

2 жыл бұрын

Take a look at pinned comment above. 😃

Would you sell them if requested?

@DesignCo_two4

2 жыл бұрын

Hi, I typically sell these locally. Might be pricey to ship an item like this but can look into it. You can message me on my Instagram - design.co.yxe

@DesignCo_two4

Жыл бұрын

@Robyn Burdette No Facebook page. Just an Instagram account - instagram.com/design.co.yxe/ Please message me there for more info.

I’m feeling anxiety the way the video feels so rushed lol

@DesignCo_two4

8 ай бұрын

Lol it was my first video! I've slowed things down now, I think

Awesome job 👍 Bet you're kicking yourself for staining across the grain, though.

@DCUPtoejuice

Жыл бұрын

lol

@DesignCo_two4

8 ай бұрын

You can stain across the grain