DIY Desk with dual motorized Monitor Lift - How to Build Guide | Tips, Tricks & More
Ойын-сауық
Hi guys, I spent two months building a desk with a motorized monitor lift.
How do you like the idea and the result? Let me know in the comment section below!
Here you will find all project files for rebuilding:
Arduino code, 3D models, incl. 50, A4 pages building instruction:
www.lt-videography.de/diy-dre... (it`s german... I`ll upload an english version soon)
DIY external 5K monitor - Looking like a real iMac:
• DIY externer 5K Monito...
Links:
Steel:
rover.ebay.com/rover/1/707-53... Hollow section steel square tube / 131281636829? Hash = item1e90fecddd: m: mP8VHNULtBdLa9G_WceFXzg *
2x linear guide (D = 20mm):
rover.ebay.com/rover/1/707-53... Linear Guide-shaft-assisted-carriage-16-20mm-250-bis-1900mm% 2F123603765365% 3Fhash% 3Ditem1cc75bc875% 3Am% 3Amcf4cgm-qNNNjIsqkTB__VA *
Roller shutter motor (RT45 30)
rover.ebay.com/rover/1/707-53... Tubular Motor Roller Blind Motor Complete Set SW60 Control Wheelset% 2F371320723257% 3FssPageName% 3DSTRK% 253AMEBIDX% 253AIT% 26var% 3D640438153258% 26_trksid% 3Dp2057872.m2749.l2649 *
2x linear guide for speaker boxes:
rover.ebay.com/rover/1/707-53... SBR12-600mm-Linearf% C3% Bore-Sliding-Track-Shaft-4X-SBR12UU-Linearblock% 2F232998891219% 3FssPageName% 3DSTRK% 253AMEBIDX% 253AIT% 26_trksid% 3Dp2057872.m2749.l2649 *
Electronic components:
amzn.to/2XrxM2Z *
Table top (acacia nature, 3,6x100x200cm)
www.slewo.com/sit-tops-tables...
Everything else can be found in your local hardware store.
For a better understanding, check out my 50-page documentation and other project files:
www.lt-videography.de/schreib...
I wish you a very nice day!
Leo
------------------------------------------------------------------------------------
Mein Equipment:
Video:
Panasonic GH5: amzn.to/2CAgWbY *
Panasonic Leica 12-60mm: amzn.to/2Pxrc7G *
SmallRig GH5 Cage: amzn.to/2PpaozV *
Licht:
Softboxen: amzn.to/2NvzhIs *
Ton:
Rode NT1-A: amzn.to/2QGkNHt *
Focusrite Scarlett Solo: amzn.to/2yrCIu8 *
Rode VideoMicro: amzn.to/2yqP05V *
Schnitt:
Final Cut Pro X
------------------------------------------------------------------------------------
Music by:
Music by Epidemic Sound (www.epidemicsound.com)
------------------------------------------------------------------------------------
Kontakt:
info@lt-videography.de
Die mit * gekennzeichneten Links sind sogenannte Affiliate-Links, die mit einem Partnerprogramm von z.B. Amazon verknüpft sind. Werden Käufe über diese Links getätigt, erhalte ich eine Provision von z.B. Amazon. Der Preis für den Käufer (euch) ändert sich dadurch natürlich nicht. :)
Danke für eure Unterstützung!
Пікірлер: 1 300
use 200 lbs of steel tubing and 10-15 welding rods just to lift two computer monitors. thats the type of overengineering that make me proud
@3DArtcore
4 жыл бұрын
some people just prefer objects like this to be stiff and solid.
@richiehustle
4 жыл бұрын
Russ Lindsay German style robust. Respect from russians
@FusselKev
4 жыл бұрын
Nothing is over engineered on this thing.
@richiehustle
4 жыл бұрын
@@FusselKev how about the whole lifting mechanism.
@Bob_Caygeon
4 жыл бұрын
Ummm….that's 40lbs at best of sch10 tube and also no rod if you don't know mig.
Absolut geil einfach.
@TipsTricksMore
5 жыл бұрын
😀💪🏼 Danke dir!
@oskarkeil1874
4 жыл бұрын
Mein oskar
@felix_5365
4 жыл бұрын
@@TipsTricksMore Bau doch so einen tisch für oskar vielleich macht er auch Werbung für deinen channel @Oskar
@TipsTricksMore
4 жыл бұрын
Ich war gerade erst bei Oskar Vorort. Das Video findest du auf meinem Kanal 😉
@flo-qk7bp
4 жыл бұрын
@@henesi604 ja
I love that the speakers rising is slightly delayed. Very cool that they only start rising when the the monitors are about 2/3 of the way up. Quality job!
Danke für 1.000.000 Aufrufe😱!!! Ihr seid der absolute Wahnsinn 🙏 Hi, hier findet ihr Projektdaten zum Nachbauen: Arduino Code, 3D Modelle, inkl. 50 Seiten Bauanleitung :) www.lt-videography.de/schreibtisch-mit-dual-monitorlift Viele Grüße
@stanitheboss8728
4 жыл бұрын
Tips, Tricks & More geht das anstelle des vierkantrohres auch mit Aluminium systemprofil?
@TipsTricksMore
4 жыл бұрын
Auf jeden Fall! Sollte kein Problem darstellen :) Wird dann nur deutlich teurer 😉
@dnjmine3176
4 жыл бұрын
Uff 2 IMacs pro aber wieso nicht in Space grau? ABER UFF soerwas mit fast 9k Abos
@Snsee
4 жыл бұрын
@@dnjmine3176 Das zweite ist nur ein Monitor, hat er auch ein Video zu gemacht.
@dnjmine3176
4 жыл бұрын
Lorenz Maier hab ich später auch bemerkt
Das ist ja wirklich ein richtig grandioser Schreibtisch. Du kannst stolz auf deine Ideen und deine Arbeit sein. Toll zu sehen wie das Meisterwerk entstand.
Wahnsinn. Ich bin mit meinen 47 Jahren ganz schön neidisch (aber das meine ich nicht negativ)! Ich finde es mega toll was Du da so alles fabrizierst und erfindest. Ich ziehe meinen Hut vor dir ming Jung. Liebe Grüße aus Köln und ein dickes DANKE für deine Inspirationen.
So ein Video sehe ich erst nach Weihnachten hier in KZread? Verdammt!!! Somit mein nächster Wunsch vorgemerkt. TOP!!!
Für alle die dachten Nerds machen nur was mit Computern. So mag ich KZread. Das ist für mich "Broadcast yourself". Was geiles für sich selbst geschaffen und dann andere daran teilhaben lassen. Einfach nice!
Riesen Respekt, dass du das alles selber gemacht hast! Solche Leute wie dich braucht das Land! :)
According to the clock on the wall, this really took no time at all!
@TipsTricksMore
4 жыл бұрын
😂😂👍
@brintonphotography
4 жыл бұрын
Lol
@montanaheaventush
4 жыл бұрын
I was watching that for ages to see how long each stage took, then I realised it had stopped LOL 🤦♂️🤣
Das beste Video bezüglich dieses Themas, welches ich bisher sah. Fehlt nur noch, dass sich der Deckel beim Versenken mitschließt. Aber das ist meckern auf hohem Niveau.
@TipsTricksMore
4 жыл бұрын
Hi, das tut er! Siehe 0:22 😊😉
Der OBERHAMMER! Einwandfreie Optik, Klasse Umsetzung.
@TipsTricksMore
4 жыл бұрын
Danke dir 😀
Absolut geil. Werde den aufjedenfall nachbauen für meinen schnittplatz.
I love our classic german overengineering. This gives me lot's of ideas for a desk in a camper (omni-)bus. Especially the table top could be used as a light blocking roof. Also if it does not flip over, you could place plants or other things on top which just move upwards with it. I love the idea of the second, lower platform to put the keyboard and mouse (and other peripherals) 😍
@Thatoneninja22
Жыл бұрын
exactly why i came searching for this as well
@sarareid3506
Жыл бұрын
@@Thatoneninja22 Same here. We are going full time in an RV and my husband needs an office space but we need to maximize space.
After watching this video, I realized that I should be happy with diy perks video
Das ist das krasseste Video, das ich bisher 2020 sah. Darauf kannst du sehr stolz sein. Danke für die Anleitung.
Man this made me want to open my book on my electrical engineering program again. Never thought that a simple arduino with limit switch could made something like this sophisticated tech. Lol.
@orangegaming8001
3 жыл бұрын
Well, an arduino is kinda overkill for this. But I guess the fastest solution in that case.
Das beste Projekt, was ich zum Thema versenkbare Monitore bisher gesehen habe! Respekt! 👍🏻 Nur diese Spielzeuglautsprecher passen so garnicht dazu. 🙈😜
@crisox1567
4 жыл бұрын
Sentex Alter, bitte komm mir nicht mit so billo Razer-Lautsprechern.. Die sind der größte Müll
@enrico6508
4 жыл бұрын
@@crisox1567 BRUH
@pouiWRQZGV
4 жыл бұрын
Schöne Teufel Lautsprecher würden gut dazu passen.
@enrico6508
4 жыл бұрын
@@pouiWRQZGV das ist wahr
@E620SE
4 жыл бұрын
ohje, wie hier keiner Ahnung von HiFi hat
Nice touch with the Speakers rising up too. This Desk is no joke, really nice craftmanship!
The best kind of kill...Over kill. That desk is built to last. Awesome work
After seeing 10 sec of your vid i can already tell that this is going to be awesome
@blacksheep2149
4 жыл бұрын
Oliver Tufteland After seeing 10 sec of the vid i can already tell that this is not a DIY for everyone.
@havtorn8690
4 жыл бұрын
Black sheep thats true but it depends what tools you have access to.
Du und dieses Projekt seid einfach nur der Hammer🤯
@TipsTricksMore
4 жыл бұрын
Danke dir :)
Dedication and hardwork! Beautiful project! Respect!
wow, was ein Unterschied zwischen Deinen Tesla Verarsche Video, wo Du wie ein schulmeisterhafter Lehrer rüber kommst und diesem DIY Video (und weiteren guten anderen Videos). Beide Inhalte sind gut, wobei mir der DIY Inhalt deutlich besser gefällt. Danke für die vielen guten Inspirationen, ich werde wohl auch mal wieder etwas aktiver werden.... FETTEN DANK
This is simply incredible. Nice work, I'm impressed.
Hammergeil ! Großen Respekt vor deiner Arbeit, junger Mann ;)
Awesome adrenaline pumping music in background, serious building/sawing/welding skills. This guy belongs on the "A Team". I love it when a table comes together.
Sie haben dein Computer Tisch sehr gut gemacht. Un jextz sprechen wir English. Great job, well planned out and beautiful as well. I hope that your backs did not suffer from moving it to its location. Schuss.
I liked the rotary actuator of cause your engineering skills are outstanding, you did an awesome job
Einfach mega geil! Thumbs up 👍🏻
@TipsTricksMore
5 жыл бұрын
Danke dir 😀
Très beau travail, beau et éfficace, Deutsche Qualität, bonne continuation
Dude that looks so great, you have my full respect. And there is nothing over engineered. Also the Idea to use a tubular motor, so simple and clever.
WOW absolut geil! Dein Kanal hätte mehr Aufmerksamkeit verdient!
OK he called me poor AND dumb for 14min straight
@TipsTricksMore
4 жыл бұрын
Haha 😂😂😂😂
@allmighty650
4 жыл бұрын
yep
completely unnecesary and yet, the best desk I have ever seen in my life.
Super! genau an so einen Schreibtisch habe ich auch für mein neues Homeoffice Büro gedacht
Ok you’re a person that needs the fame that was incredible 🔥🔥🔥🔥
Sehr, sehr geile Idee... von mir ein Daumen hoch. Eine Idee zum pimpen: Noch eine Elektronik einbauen, die die Monitore automatisch ausschaltet, wenn sie versenkt werden.
Was für eine mega Idee und richtig gute Umsetzung!!
Wahnsinn! Super-Arbeit und richtig schön!
You should honestly charge to make them for people I’d totally buy one !
@RaulMoronMS
4 жыл бұрын
me too
@dawid5401
4 жыл бұрын
Same
@jeanbeek
4 жыл бұрын
Your pockets need to be big for that.....
@Gagliano17
4 жыл бұрын
that type of stuff is not worth it, if you take work time + cost of stuff used, nobody would still think about buying it, and you can make alot more by just doing regular jobs, otherwise it can only work when it gets an insane exclusive price.
@erikmitchell6206
4 жыл бұрын
@@Gagliano17 I was going to say the same thing. I used to build furniture for people, but no one wanted to pay for my time. They just wanted to pay for materials.
This is seriously awsome!!!! I wish I had this skill:(
Ich wünschte so eine Werkstatt zu haben, der Hammer!
so far the greatest build i've seen.
Meinen größten Respekt! Die Konstruktion ist echt genial und der Gesamteindruck am Ende ist nicht zu topen! Eine wunderbare Inspiration für alle Leute die gerne basteln 🤙🏼👍🏻
@TipsTricksMore
4 жыл бұрын
Hi Florian, danke für die netten Worte 😀
Respekt, echt sauber gearbeitet und ein sehr tolles Ergebnis :D Meinen Like hast du
Absolut perfekt! Ich muß sagen. Ich habe dich unterschätzt.
This video made me want to go down to the hardware store and start my own DIY project. Don't even know what I'm gonna build but I gotta get something started.
Sehr sehr geil 👍🏻
Imagine doing all that just to put Mac's in there.
@tannerhughes11
4 жыл бұрын
i know, such a waste
@jameswalker199
4 жыл бұрын
Two, no less, unless Apple's free standing monitors have changed appearance recently. Still, you can obviously install other operating systems on a Mac if you find you need that for your workflow, but given that all the games you're probably about to mention already run on Mac and probably even Linux these days, you may not even need to do that.
@EricSonVlogs
4 жыл бұрын
@@jameswalker199 nah man. I need a thing that lifts my desktop up and down so I can save space and show off my desktop when I want to.
@petergoestohollywood382
4 жыл бұрын
jameswalker199 yeah but who on earth would do that? For this price only to get the components seems like a even more bad deal.
@dst9780
4 жыл бұрын
The monitors are actually two custom-made 5k monitors he made. They just look like IMacs but function like normal monitors. Here's the link to his build video: kzread.info/dash/bejne/mq6IuMdvkbnNp9o.html (it's in the video description)
Holy hell brother! You could of launched a space shuttle out of that thing with how well built that beast is but I like it! Someone in about 300 years is going to be telling their grandchildren they have no clue how it came to be in the family but it still works like day 1
Hammer! Mein Respekt und positiv-wohlwollender Neid ist dir sicher!
That is by far the most amazing desk I've seen! Throw some LEDs on there and what a gem... Can't image what it weighs and how hard it would be to move it around though. Very cool!
@johngardiner8847
2 жыл бұрын
Modustrial maker doesn't one with LED's it's amazing
great idea for a table, if you put a weight on the lifting system you will optimize the energy expenditure for the engine and consume less
@leobaldoneto
4 жыл бұрын
Great tip
Der absolute Mega Hammer! Super Idee top Ausführung und Neidfaktor sehr sehr hoch 😝
Congrats for the built! It's freaking awesome! The electric shade motor was definitely a good idea! Cheers from Portugal!
Great piece of work and as someone already pointed out, highly over engineered, but to me that is perfect! I just wondered if a power switch on the monitor cage might be in order so that monitors turn off and on automatically as they retract and extend?
Do it yourself, you will need a mega fabric and a ruler. Stuff that everybody have.
Sehr cool, was ich nicht gesehen habe ist wie der Deckel wieder geschlossen wird. Also womit er aus der Senkrechte wieder rauf die gewinkelten Bögen kommt.
Türkiye'den selamlar,çok güzel olmuş, tebrik ederim kardeşim
Grande!!!! Sei un genio ma come fai ad avere così pochi iscritti e poche visual... sei un genio tu sei il Leonardo Da Vinci della tecnologia!
Mega nice. Aber du solltest bei den Eisenstangen, die die hintere Holzplatte hochheben, einen sanften Stoff verwenden, sodass das Holz nicht langfristig belastet wird. ( Kratzer Spuren )
@TipsTricksMore
4 жыл бұрын
Sehr gut beobachtet! Habe ich tatsächlich nachträglich auch gemacht :)
Wirklich richtig gute Idee, Respekt für die Umsetzung.
Sensationell. Größter Respekt!
You could put 1000kg of monitors on that monster! I love your work.
Immer diese Kindischen Schweißhelme xD krasses video btw
Talk is cheap. Congrats to your effort. From Argentina.
Hammergeiler Schreibtisch - damit solltest du in Serie gehen :-) Klasse Arbeit - Perfekt !!!
Hexer! Verbrennt ihn!!!! Nice wirklich nice. Da sieht man mal was man tolles aus dem Handwerk schöpfen kann. Hat mich sehr inspiriert.
@TipsTricksMore
4 жыл бұрын
😂😆 Danke dir :)
Incredible engineering and skillset for your age, or anyone
@TipsTricksMore
4 жыл бұрын
Thanks Lucas!
Super Projekt, DANKE !!!
RESPEKT! Absolut geiles Ergebnis :)
Endlich mal mehr Geistreiche KZreadr !!Sehr Nice Idee und saubere Umsetzung.👌 Und an deinen Handschuhen sieht man echter Handwerker😂
@TipsTricksMore
4 жыл бұрын
😂😂😂 Ich habe schon gewartet, wem die Handschuhe als erstes auffallen 😆😂👍
Jetzt fehlt nur noch ein USB-Rubberduck, der die Macs ausschaltet, wenn man den Tisch runterfährt 😅
@thynk-unlimited
4 жыл бұрын
Genau das habe ich mir auch gedacht 😄
@moritzpasdika6995
4 жыл бұрын
Und ein Wireless - Charging - Pad in dem Tisch eingebaut
@TipsTricksMore
4 жыл бұрын
Vielleicht kommt ja ein „follow-up“ Video, wo ich eure Ideen für den Tisch umsetze 😉🤔
@felix_5365
4 жыл бұрын
Und vllt noch eine Art Ablage die man unter dem Tisch hervorziehen kann um ein ipad, Stifte etc... Zu verstauen
@DevOFVictory
4 жыл бұрын
Tips, Tricks & More man könnte auch noch eine idunktionsladestation für kabelloses laden in der Schreibtisch Platte verstecken, sodass sein Smartphone automatisch beim Ablegen lädt.
Hätte ich so eine eigene Werkstatt, würde ich mir das ebenso machen. Ich liebe es Zeit damit zu verbringen, nützliche Dinge im Haus einzuplanen. Dabei kann man das Design vollstens selbst bestimmen und ist nicht dem typischen aufgeklebten oder geschmackslosen Trend ausgeliefert.
La meilleur construction que j´ai pu voir sur la toile💪👌👍
DIY so long as you have a welder, shop setup for metal working and carpentry and the computer knowledge to program an arduino unit
@PandorasFolly
4 жыл бұрын
I have a shop full of tools and access to even more at my dads house and I think I would still need to buy or borrow more than several just to make this
DIY Item one: Have a huge locksmith
@Arterexius
3 жыл бұрын
Locksmith? That just looks like a general metal workshop to me. Regardless, the plans are of course useless to anyone who doesn't have access to any kind of workshop. Good thing that it can also be made out of wood with the addition of a few extra beams for stability
Einfach nur Hammer 👍
Genius!!! Parabéns.Say hello to Brazil!
5:04 Bei der Arbeit schön ein Flensburger Malz gönnen👍
Kann mir jemand erklären warum fast 80 Leute dieses Video gedisliked haben! Das ist doch ein EinsA Schreibtisch und das Video war auch gut man hat zwar die einzelnen Schritte nicht genau gesehen, aber das ist doch kein dislike! Komisch!
That was pure mastery at work. Great project
Jetzt hab ich ein neues Projekt Das ist ja wohl der coolste Schreibtisch, den ich je gesehen habe! I love it!
its a really nice build, but for the love of god adjust your welder xD
Sieht super aus! Für wie viele Tonnen Nutzlast ist der Rahmen denn ausgelegt?
@flo-qk7bp
4 жыл бұрын
50
@soulraizor1
2 жыл бұрын
Also 2-3 gehen sicher. Völlig überdimensioniert und wenn man umzieht braucht man eine Armee, um das Ding zu heben.
Mega. Danke für das Video und deine Dateien. Ganz Groß!!
Absolutely brilliantly genius! Now this is called true DIY!
@TipsTricksMore
3 жыл бұрын
Thank you!!!
Nice! Du bist bestimmt auch ein großer Fan von DIY Perks, oder? 😄
Dein Freund wo ist dein Setup ? Warte kurz 30 Sekunden omg 😂😂😈
Mega krass gut, bin absolut begeistert 😄👍🏼👍🏼👍🏼👍🏼
This is the best i ever see before. Beautiful job....
Me watching this while struggling to change a light bulb 😂
i was like HOLY $H!T, but then i saw mac's and was immediately like -_-
@teeeejaay89
4 жыл бұрын
Same, my boner from the desk was gone immediately.
Also : Hut ab, Klasse ! Spitzenarbeit ! Supervideo ! Und mitreißende Musikuntermalung ! Was soll man sagen ? Auf dem Weg zum Meister !
Super Idee und mega Umsetzung! Werde ich auf jeden Fall zum Teil klauen und in mein „Van Life“ integrieren... da kommt es nämlich ganz besonders air platzsparende Methoden an! 😍👏🏼👏🏼
Imagine doing all this to realize you want a standing desk.
Hi! Klasse Konstruktion! Aber mal eine andere Frage: Über welches Programm nutzt du den zweiten iMac als Monitor? Und koppelt er sich automatisch bei Neustarten?
@TipsTricksMore
4 жыл бұрын
Hi, das ist ein DIY externer Monitor im iMac Style. Hier gehts zu meiner Bauanleitung ;) kzread.info/dash/bejne/mq6IuMdvkbnNp9o.html
@nemomit5o695
4 жыл бұрын
@@TipsTricksMore du hattest recht wo du um anderem video gesagt hast dass man die bildschirme nicht auseinanderhalten kann mit echten hahaha
ABSOLUT GEISTESKRANK!!!!! Mega geiles Projekt - bin echt krass neidisch weil das schon verdammt gut aussieht...STARK! 👏
At that point, the desk is worth so much more than the macs... love it!