Just watching you machine these parts from scratch is hypotonic

Congrats to Mrs B Great job on assembly and decorating room . Viny you sir have an awesome lady 🤘😎🤘

@VinyB57

2 жыл бұрын

Thanks man...I sure do think the same thing about my lady! 😁

Good to see the d fairy in the video - lol. Binge watching yr funny as hell and cool build videos. More people need to find yr channel!!!!

@VinyB57

Жыл бұрын

Hey thanks Tom, hope you are right and I'll get more fellows like you! 👍

That's awesome! For some reason I never got notified! Your a great dad and a lucky husband!

@VinyB57

2 жыл бұрын

Thanks Mike! I know I'm a lucky husban...but don't tell my wife! 🤫

@thercbarn5001

2 жыл бұрын

@@VinyB57 hey no problem!

Another great video. You are still massively under-subscribed my friend. Tell the wife great job.

@VinyB57

2 жыл бұрын

Hey Austin! thanks my friend! I had a really bad 2022 start. The algorythm is not on my side for now. How are things for you, for the KZread part I'm talking, because regarding your projects. I'm following them closelly with the vids 😉

@AustinCoulson

2 жыл бұрын

@@VinyB57 Oh my analytics are in the dump because my videos are all over the place. I've been told I should do a second channel that is my Barndo build and keep my auto channel just auto so KZread knows who to suggest my videos to, but it's hard enough to post regularly and I'm a builder who KZreads not a KZreadr who builds so I'm bad at the computer side of things. I'm consistently impressed with your editing skills and I love how you over engineer things. Anytime I get a notification for a new video I get excited knowing my brother-from-another-French-Canadian-Mother is going to make me laugh and drop some engineering knowledge on me at the same time.

@VinyB57

2 жыл бұрын

@@AustinCoulson Bro...I understand you so much!!! A seco d channel...isssh.. as you said, hard to release content...and now split in two between 2 channels... gonna be hard my friend to build up that crowd! I have the exact same problem, all my non-smart busa vids are not really good with the algo... 🤦‍♂️ Thanks regarding the editing, it s a shit tone of work! That it's! 2 to 3 hours for a minute of vid. Dont know when we will have the time to do a colab...let s try before we both reach 100k 😅

Love the Ferrari F40 inspired wheels. That's what I see anyway. Great project! Almost had "tire sur la neige" there too before cooling off parts. 😎 Greetings from Vermont.

@VinyB57

2 жыл бұрын

Hummmm I didn't made the connection with the F40 wheels...but you're right! Please, don't use the same snow from the cooling container, it finished into a puddle of smoky smelly snow 🤢

Awesome job Vinny!

@VinyB57

2 жыл бұрын

Thank you! Cheers!

9:43 it’s nice to see a design that stands out! A cool finishing touch to the awesome room your wife made!

@VinyB57

2 жыл бұрын

Thanks Lars, glad you liked the design! 👍

Looks good and works well, great job

@VinyB57

2 жыл бұрын

Thanks 👍

Très beaux travail, bravo champion 👍👍👍👍

@VinyB57

2 жыл бұрын

Merci merci! 😁

Great work Vinny, your plans gave me ideas for building my sliding doors.

@VinyB57

2 жыл бұрын

Great! That is exactly why I share those vids! Let me know if you made your own version, pictures would be nice too! 👍

Great video man really looks good 💯👍

@VinyB57

2 жыл бұрын

Glad you like it

Viny B, Thank you for posting this video :) So glad that you did. You will reach a wider audience and you are very entertaining but more importantly, you are providing very educational content. I think a lot of us are here to learn, it does not matter the project. I might show this video to my students, but I am unsure how the female students will react to your wife's doodle. Would you ever want to do a Zoom/google meet with my High School Automotive/Construction classes? Legault

@VinyB57

2 жыл бұрын

Hey Chad, thanks for the kind comment! Glad you learn something out of it! I never planned to make videos for an educationnal context, so I don't hing the ''doodle'' part is very appropriate either 😅. For the zoom meeting, first, it's probably in english right? In french, I'll do it in a hart beat...but my english is ok-iiiish. I never did a youtube live for that reason. Let me know how we can setup something by mail: design57@outlook.com 😁

Je suis toujours épaté de voir à quelle température tu travailles. Sinon j'ai bien aimé cet épisode par ce que le résultat est joli. Pas discret mais joli :)

@VinyB57

2 жыл бұрын

Ah merci! Effectivement niveau de discrétion: 0, mais le résultat fond quand meme assez bien à travers tous les jouets, bricolages et décorations de couleurs vives dans la chambre à ma fille! 😅

Je viens de decouvrir cette chaîne exceptionnelle. Je m'abonne. Hi !

@VinyB57

2 жыл бұрын

Cool! Bienvenu abord! 👍

You do love to build and design things, great tips as well. But I couldn't understand one French word at the end, not one! Is it so different from the French French? Regards from Switzerland ✌

@VinyB57

2 жыл бұрын

That is exactly why I do vids in english, because my Canadian french is only understandable by other french canadians....since we are about 8M in the world and people understanding english could be count by billions...it's a no brainer for me!

Hey Viny , I finally got my Busa dune buggy running , and it sounds great but when I start to push the clutch pedal in it makes a grinding noise like if you were you're trying to shift without the clutch ? would you have any idea what it could be ?

@VinyB57

2 жыл бұрын

Yes, I had the same issue, you can here it in my video when I started it for the first time! You are probably sending to much oil to the slave cylinder, which opens too much the bascket with all the discs, thus, they rub againts the casing. Are you using the original clutch lever or you made you own?

@AlanDavid1955

2 жыл бұрын

@@VinyB57 NO I BOUGHT A PEDAL SYSTEM A HYDRAULIC CLUTCH , HYDRAULIC BRAKE AND A CABLE DRIVEN THROTTLE PEDAL , I WAS THINKING THE SAME THING , YOU'RE GETTING TO MUCH FLUID WITH THE TRAVEL OF THE FOOT CLUTCH PEDAL , HOW DID YOU RESOLVE THIS PROBLEM ? AND THANKS AGAIN FOR YOUR ADVICE !!! ALAN

@VinyB57

2 жыл бұрын

@@AlanDavid1955 REALLLYYYY simple, weld a limit bolt and fine tune it to stop propper to when the clutch will "bite" or where the sound stips, but you ll see, it s a really short clutch motion you re gonne end up with! And it s normal, the master cylinder on a han lever is minuscul compare to the master cyl you bought!

@VinyB57

2 жыл бұрын

I re read myself, and the bolt is to limit your clutch pedal if it was not clear enough 😅

@AlanDavid1955

2 жыл бұрын

@@VinyB57 so install a bolt on the clutch pedal to limit the distance your clutch pedal moves ? When your using the clutch lever on the bike it only has an inch to 2 inches of travel . ( movement )

Realy nice design! And the costumer were pleased? Hey your wife doing something without you....? Isnt that kind of nice, she working in the nice warm house, and frezzing your ass of in the garage......!!!? Oooo, now you and your famaly i Swedish!!! When are you moving over here??? Viny would like to ask you Design 57- history about... it....will it be a house hold name? Good job! Nice design! ONE VIDEO A WEEK, thats all I ask of you....🤯🤣

@VinyB57

2 жыл бұрын

Hey Tony, there's not much history about 57 Design, that's the branding I sell and sign my plans with. Since I alreadyt work full time for anothe company, I don't really spend much time developping that brand.....for now that is...😉 I wish I could make that thing more official and sell hats and t-shirst with incradable designs!

@tonyestvik7969

2 жыл бұрын

@@VinyB57 yes lets do!

Coolest thing is that yr kids will grow up thinking it’s normal for dads to build $3000 custom barn doors for their bedrooms.

@VinyB57

Жыл бұрын

Yeah...I messing up these kids good! 😅 My youngest always ask me to repair everything she brokes...but I won't spend time fixing dollard store stuff...so yeah, they think I can just 3D print a new one! 🤦‍♂️

☝️ p͎r͎o͎m͎o͎s͎m͎

this old tony.

@VinyB57

2 жыл бұрын

NO, this old Viny...😅

@zonta71

2 жыл бұрын

@@VinyB57 awesome. We not old, we just a time capsule. Enjoying your channel. Thanx for the videos.

Belle Job Vincent!!!! Sa fait du bien de changer de projet de temps en temps!!!! Ta blonde est photogénique!!!!!! Tu devrait la faire commenter tes vidéo au lieu de te faire aller les mains!!!!!!!!!!!!!!!!!!!!!!!!! (JOKE!!!).

@VinyB57

2 жыл бұрын

Si tu savais comment j'essais de l'avoir avec moi sur mes vidéos! J'ai même eu l'idee de l'avoir dans l'outro et j'aurais remplacer ça voix par la mienne...rien à faire, c'est pas qq chose qui l'intéresse! 🤷‍♂️

.

@VinyB57

2 жыл бұрын

always a point..at least it counts for a comment... 😁

I’m jealous, what tool don’t you have? And a d*k fairy? You are so lucky.

@VinyB57

2 жыл бұрын

I don t have a TIG welder...yet... but 🤫 don t tell the wife, but it s the next purchase!! 😁

15,000 dollar doors

@VinyB57

2 жыл бұрын

Jeeeez, for that price, HEY ARE FOR SALE!! 😉

Ah! I am used to seeing your face with your voice! In my opinion, stick with how your videos have been, don't start the "this old tony" style... I very much enjoy your videos!!

@VinyB57

2 жыл бұрын

Hey Chris, actually, it's not a new format that I tried. I made that format in others videos, since it was a short and quick project (project + editing under 2 weeks) I used this style over the more classic, stand in front of the cam, but don't worry, you'll see again my big hairy face on the next one! 😅