Great job!! This was exactly what I have been searching for. God Bless and happy fishing!!

@nocoastangling

2 ай бұрын

Awesome! Glad is was helpful. 👊🏻💪🏼

Great video! Can not wait to set my tri-toon up like that 🎣

@nocoastangling

12 күн бұрын

@@briandittbrenner2432 right on!

Just bought a Sun Tracker 22 and have a Mega live to put on it. You are right, it appears that , for now, Pontoons are kind of like orphan children when it comes to putting things on one. Found this and since you have a Ranger, they are pretty much the same Boat, different name. Anyway, it is exactly what I was looking for. Thank You, Also thank you for not taking up half the video with useless rambling about anything but the subject at hand, good job. Will have to check out some more of your vids.

@nocoastangling

Жыл бұрын

Thanks so much. Hope it helps and takes out some of the guess work.

Thanks for the video I turned my pontoon into the ultimate fishing machine but have a heck of time with transducer mounts there is hardly anything for pontoon boats thanks for taking the time to video it great job

@nocoastangling

3 ай бұрын

Thanks so much! Fish on 👍🏻💪🏼

There is not a lot out there , there is a lot out there.

Just bought the Suntracker FB20 and your video was spot on for what I was looking to do. Thanks for the great info.

Thank you for creating this video. It has helped my in laws out a lot.

@nocoastangling

Жыл бұрын

So happy to help!

just what i was looking for. Wish i could have the part numbers you mentioned.

@nocoastangling

2 ай бұрын

The part numbers are in the video description

thanks man. i think im going to make the larger pipe shorter so i can just lift the 1" pipe with the transducer on it straight up out of the water so we can motor to the next stop.

@nocoastangling

Жыл бұрын

Great idea actually. 🤘🏼

Great job, thanks for sharing!

I think you video is awesome but I so need that storage box 😂

Dude, just found your page and it is awesome! I ordered the 223F this week and will have it in a few weeks. I also have a Helix at the helm and Ulterra 80# TM that I will be moving from my current boat. Might go with Livescope or Mega Live up front. I do plan on putting Talons on the back of the boat for fishing / beach action. I will watch more videos when I have time. Appreciate the videos already though, nicely done!

@nocoastangling

2 жыл бұрын

Right on man! Congrats on the new boat! Thanks for the encouragement on the channel. I love the idea of the talons. That will be sweet.

Great info, great video.😊 thanks.

@nocoastangling

10 ай бұрын

👊🏻👍🏻

Wow man sweet setup! Thanks! How’s it working out

Ranger might have the best fishing pontoon. Am looking for a fishing pontoon for my next boat. Would love to have a different place for the side imaging transducer too so my imaging isn’t 20+ feet behind me.

@nocoastangling

Жыл бұрын

Absolutely love mine!

Great video, very informative and easy to follow. I'm going to try it on my pontoon. How did it do on the water?

@nocoastangling

Жыл бұрын

Thanks! I am very happy with the way it has performed. It has really held up well.

Nice

Awesome video brother… I have a bass buggy 20 footer from Bass Pro Shop 75 horse motor. I got the Alterra Troll motor in the front there in the front gate area or yours is mounted I have a question. Where is your FishFinder for your trolling motor I did not see one in the video. What are you using for that? I have a helix 9 inch that’s almost mounted where yours is GARMIN is mounted a little bit higher than that on the rail… Fishing guide from the area told me that if you get a ram mount and mount it in your center council area or you drive you can use it for your grafting with your Transducer that comes with your Garmin screen and then when you want to use it for live scope, you just turn it towards the front of the boat where you’re fishing where you could see everything this way it serves two purposes and you can use the same battery I believethat comes with your regular 12 V starting motor battery the saving about 75 pounds of weight as well… Thoughts on that?

Hey man this pretty cool. I'm buying a toon here in the next month or so and will be looking to do this exact same install except I'm hoping to do the garmin force TM to go with the garmin 12" graph. Do you have anything to add or thoughts after using it post install? I'm saving the vid for reference

@nocoastangling

3 ай бұрын

Right on! After a couple of year using it…I haven’t changed anything. It works really well.

Curious, I would like to troll about 2 to 4 mph with the livescope transducer in the water while I search for Stripers. Is your secondary pole brace strong enough for trolling at that speed? Right now on my small boat I have to use a rubber bungee strap to keep it from flexing backwards and changing the angle. Thanks!

@nocoastangling

2 жыл бұрын

4 mph would probably be pushing it but I move around quite a bit with mine in the water.

Thanks for the video, you are correct there isn't a lot out there for pontoon poles. I am trying to do what you did, my boat is on a lift so i also want to be able to put my cover on, l think your way will let me do that but i have it in my mind to put it on the front of the boat in front of your corner box, i have the same type box. You said you put the transducer on the pontoon is it above the water while running and just a few inches under water while fishing or did you mount it pretty deep and how did you attach it. Tnx jo

@nocoastangling

2 жыл бұрын

I put it on a piece of steel and attached it to the under side of the deck. It hangs down a couple feet so it’s in the water. I’m looking into putting a break away hinge on it somehow just in case I were to hit something. 🤷🏻‍♂️ hope the video helps.

@johnpralle9623

2 жыл бұрын

So how far down is it, did you weld a pipe to the plate that you screwed underneath the floor.

@nocoastangling

2 жыл бұрын

@@johnpralle9623 it hangs down just below the pontoons. I just drilled and bolted it to one of the cross beams that is under the pontoon deck.

@johnpralle9623

2 жыл бұрын

Ok thanks and good luck fishing.

@robertliebeck6240

2 жыл бұрын

how long are the poles? Also what is the model number of the Ram mount for the head unit?

Great video, do you make the floor mount post or is it commercially available?

@nocoastangling

4 ай бұрын

It’s a Ram mount but I don’t remember what part number. It’s one that I just picked up off the shelf at a bass pro.

Nice work! What are you using to attach the transducer cable to the PVC pole?

@nocoastangling

3 ай бұрын

Black electrical tape. Works great. Never had any issues.

Great job. Where did you run the wires to connect your the battery charger?

@nocoastangling

4 ай бұрын

The battery that runs my live scope setup is completely independent of everything else so I just put a small charger on it by itself when needed. It would be nice to tie into my onboard charging system but the wires would be exposed and I wouldn’t like the look of that.

I'm getting ready to order Ram mount parts for the transducer pole mod. Now that you have been fishing with it, did you need to change anything to make it work better? If yes, a video update with new parts list would be awesome. Also, did the under-deck mount transducer end up working okay? I'm in the same situation having the transducer and wondering where to mount it. Would like to see a short video on that if it did. Diggin' your YT vids and appreciate the feedback.

@nocoastangling

2 жыл бұрын

No, all of the partsI have work great. Better than expected actually. I will probably do another video soon of the lower mount since people have been asking me about it.

@WickedTooners

Жыл бұрын

@@nocoastangling Just following up to let you know I built my transducer pole mount pretty much like you showed in the video. I did upgrade the lower secondary bracket system by installing a 1.5" ram ball under the boat deck with short ram arm that is then connected to the pvc 1/2 clamp thingy that I shaved down like you said to make it easier to slap in place. Thanks again for the great video on this setup!

@nocoastangling

Жыл бұрын

@@WickedTooners that’s awesome! I was hoping someone would improve the design and make it better! I actually had to redo my bottom section recently since mine fell out somewhere along the highway during transport. 🤦🏻‍♂️ I put a new one on but zip tied it so it couldn’t fall out and be lost again but I like the ram mount idea much better! Here’s to catching a ton of fish my friend! 🫡

Love your video i have a pontoon to so I just need that ram c mount and where you get it

@nocoastangling

Жыл бұрын

Thanks! 👊🏻💪🏼 I ordered it directly from rammount.com

@bzarwheatfall-ts3ro

Жыл бұрын

Can’t find the one that goes to the rail

@bzarwheatfall-ts3ro

Жыл бұрын

What’s the part number

@nocoastangling

Жыл бұрын

@@bzarwheatfall-ts3ro rap-404U

@nocoastangling

Жыл бұрын

@@bzarwheatfall-ts3ro all of the part numbers are in the video description

Just saw your video, pretty much what i was looking for. Where did you order the parts from?

@nocoastangling

5 ай бұрын

I ordered all of the ram parts directly from ram.

What lenght did you end up with from the rail to the bottom were the transducer is

@nocoastangling

Жыл бұрын

I’m on the road so I will have to check when I get home.

Do you have a number part number for the ram products you used on the pole?

@nocoastangling

6 ай бұрын

1.5" PIPE SOCKET RAP-294U DBL SOCKET ARM. RAM-201U-B MED TOUGH CLAW. RAP-404U

@jacoblopez3709

6 ай бұрын

Long arm?

@nocoastangling

6 ай бұрын

@@jacoblopez3709 that holds the screen?

@jacoblopez3709

6 ай бұрын

No sir for the parts for the pole that clamps to the rail on pontoon

@nocoastangling

6 ай бұрын

@@jacoblopez3709 those are the part numbers I sent earlier for that set up.

Just found your YT....curious, how tall is your garage door? Mine is an 8' door and wondering if the 220F will fit? Thanks!

@nocoastangling

2 жыл бұрын

My door is a 10 foot door and the Bimini top clears by a few inches when I’m the stored position. I wouldn’t be able to get my boat through an 8 foot door for sure.

@WickedTooners

2 жыл бұрын

@@nocoastangling Thanks! I was hoping that without any Bimini the helm would be low enough to fit. I'll have to research the Fishin barge height at helm without windscreen. 👊🏻👍🏻

@WickedTooners

2 жыл бұрын

I'm watching your video with my wife. She likes the 220F. If you have a minute one of these days it would be awesome to know the helm height from ground. Any help you can give is greatly appreciated. Have a fun and safe Memorial Day. God Bless!

@nocoastangling

2 жыл бұрын

@@WickedTooners sure thing. I’m at boundary waters for the next week but I can check it out when I get back. If you don’t hear from me again just shoot me another comment and I will do it! 😉

@WickedTooners

2 жыл бұрын

@@nocoastangling Hope all went well at boundary waters. I'm just checking back to see if you wouldn't mind measuring that helm height from ground? Many thanks!

Love the boat what was the price boat and trailer if you dnt mind me asking im looking into buying a pontoon?

@nocoastangling

Жыл бұрын

It was right around 50k with all the electronics, upgrades, and what not.

@markmartinez6213

Жыл бұрын

@@nocoastangling how you liking the boat?

@nocoastangling

Жыл бұрын

@@markmartinez6213 ya I love it! Was on it all day today. Super comfy and easy to fish from. 2 live wells and everything I would need.

@markmartinez6213

Жыл бұрын

@nocoastangling ok thanks I will most definitely be following you so i can get info from you lol

@markmartinez6213

Жыл бұрын

@nocoastangling can I ask where you purchased it from ?

How many feet below surface does the transducer need to be?

@nocoastangling

8 ай бұрын

It’s about a foot below the pontoons.

Any luck I could get the part numbers for the Ram and tough claw and ball

@nocoastangling

2 ай бұрын

They are in the comments I believe

@nocoastangling

2 ай бұрын

Sorry…the description

what is number on tall ram mount? didn't see it. thanks

@nocoastangling

4 ай бұрын

I honestly don’t remember. This was a part that I didn’t order. I just picked it up off the shelf at a Bass Pro Shop.

@cooldude4361

4 ай бұрын

Ok Thanks@@nocoastangling

Are you still using this setup?

@nocoastangling

Жыл бұрын

Yes

@SQLKC

Жыл бұрын

@@nocoastangling I ordered the bits from Ram like you said not cheap, will let you know how it goes.

@nocoastangling

Жыл бұрын

@@SQLKC right on! Can’t wait to hear about it.

Pro fisherman HATE pontoons

@nocoastangling

Жыл бұрын

Hahahaha ok! Thanks for watching. 🫡

@truck57us

Жыл бұрын

Just jealous of the comfort? Love my fishing pontoon.

@akpoindexter1982

Жыл бұрын

i think the haters are more often, the fishermen that spend $80k+ for their bass boats and only fish 2-3x a year. hahaha