▶Carveco: store-us.carveco.com/?ref=thehardwareguy ▶DISCOUNT CODE: HWG5OFF

Happy New Year! if you are enjoying the series please give the video a thumbs up. Helps the channel out. Thank you :)

@madhavtakkar5025

6 ай бұрын

hi sir happy new year pls upload your free cad tutorials i just loved it and by your tutorials i created small parts and as a hobbyist i wanted to create big parts too

@thehardwareguy

6 ай бұрын

I no longer use FreeCAD unfortunately, I gave up with it due to many frustrations I had with its user interface. Still a great tool for basic CAD work, but as soon as things get complex it falls short in my opinion.

@madhavtakkar5025

6 ай бұрын

@@thehardwareguy any free alternative in your opinion ?

@thehardwareguy

6 ай бұрын

OnShape is fantastic

@madhavtakkar5025

6 ай бұрын

@@thehardwareguy thnks sir love from india ♥

Very good job brother !

Very informative. thanks

Thank you!! 🙏🙏🔥🔥🔥

two notes regarding your layout your VDF cable should be as far as possible from signal cables because noise can not be totally eliminated even with shielded cables. Maybe metal back panel would be better than wood to help reducing heat from the inverter.

You mentioned difficulty in executing the 16 mm holes through the box sheet metal. I’d recommend using a multi / step drill, as they do a good job of making clean and accurate holes in sheet metal, and following up with the same from the breakout side will chamfer that side. 16 mm = .629”, 5/8” = .625”, which is a common step drill step size.

@thehardwareguy

6 ай бұрын

Of course! seems so obvious now you've said it. I have those in the workshop I just didn't think to use it. Probably could have done both the 16 and 20mm with the same bit. Thanks for the feedback 👍🏻

If the fans are insanely loud, you could try running them at 12 volts. The other option is noise-cancelling headphones.

Your motor drivers appear to be daisy chained (red wire at the bottom of each one). Each red wire should be run to a terminal block instead. Also, the braided shielding of each cable in the enclosure should be soldered to a wire (ground drain) and all joined to a grounding bus bar. Corvetteguy50 covers this really well in several of his videos. You can also add noise supressor power EMI filters to power the VFD and the power supplies.

For NEMA 23 do I need a vfd ?

@thehardwareguy

5 ай бұрын

The VFD controls the Spindle Motor

@viktorviktor5405

5 ай бұрын

Thank you for the info, excelent content btw

hi sir can you provide connection diagrams

What size is that box?

@thehardwareguy

16 күн бұрын

16" x 8" x 20"

That is a work of art!! Thank you for sharing the whole process in detail. I am looking forward to seeing it all go and get calibrated. Puts my rat's nest to shame: kzread.info/dash/bejne/hX5sr8WgltuYkbw.htmlsi=cOppmopmCvgOQvRF