DIY Candles at home | Bubble Candle DIY | Candle making from old candles | melt old candles
Ойын-сауық
Welcome to my channel!
Candle Making Supplies from Village Craft and Candle: Use code "JOOLIE" for 5% off your first order! (villagecraftandcandle.com/?re...)
Molds from Nicole Molds: Use code "JOOLIE10" for 10% off your order! (boowannicole.com/JOOLIE10.)
I wanted to try making these aesthetic bubble candles at home. I bought multiple molds, but I think the DIY bubble candle turned out the best! I read online that container wax is too soft for pillar candles but I still wanted to try it out. I ended up buying paraffin wax and used 2 parts paraffin and 1 part container wax. UPDATE: I Purchased some new molds for another candle making video. Stay tuned!
🔹villagecraftandcandle.com/?re...
🔹pillar wax used in my updated candle making video (villagecraftandcandle.com/col...)
🔹wick (villagecraftandcandle.com/pro...)
I recently launched a candle brand on Amazon! I'll be releasing new scents slowly. Thank you so much for all your support!
amzn.to/466C5W0
amzn.to/43X3N5B
updated candle making video: • Candle Making DIY bubb...
Colored candles video: • DIY Candles at home | ...
Amount of wax used for each mold:
Cloud mold 9 X 6.5cm: 86g
Bubble Cube mold: 137g
Knot mold 6.2 X 5cm: 76g
Shell mold 9.2 X 7cm: 134g
If you prefer to use mL, you can convert the weight above in this calculator:
www.aqua-calc.com/calculate/w...
INSTAGRAM:
/ joolieshome
Products:
🔹pre-waxed wicks: (amzn.to/3bOo70c)
🔹Pillar wax: (www.michaels.com/simple-seren...)
🔹Shell mold (amzn.to/3lLqIgM)
🔹Cloud mold (amzn.to/2YPOwaC)
🔹Bubble mold (amzn.to/3vd9MmC)
🔹Knot mold (amzn.to/3BPXbIA)
Music:
Music by Mr. Jello - A Love Story - thmatc.co/?l=68149C55
Music by Ebony Loren - Mine - thmatc.co/?l=866B9170
Music by HONÜ - Rainbow Falls - thmatc.co/?l=56050D4D
Music by HONÜ - Hilo - thmatc.co/?l=756AB68A
DISCLAIMER: Links in this video description may be affiliate links. If you purchase a product using one of these links, I may receive a small commission at no additional cost to you. Thank you for the support!
#trendycandles
#bubblecandle
#aestheticcandle
Пікірлер: 231
I felt sooo satisfied when they turned out to be so good at the end
@joolieshome
2 жыл бұрын
Yes, definitely satisfying :) took a few tries, but I got it eventually. Thank you for watching!
Thank you queen for going through it so that we didn't have to. Your video is VERY much appreciated!!! Not sure how it hasn't blown up!!!!
@joolieshome
3 жыл бұрын
omg this is such a nice comment! As a small youtuber, this means so much. Thank youuuu for watching~ ❤️
@saraiortiz2236
Жыл бұрын
@@joolieshome
@saraiortiz2236
Жыл бұрын
@@joolieshome
@nezerinareyes7745
10 ай бұрын
san nabibili yan ganyan hulmahan ganda nyan
They look lovely! Thanks for showing the trial and error! 💛💛💛
@joolieshome
2 жыл бұрын
I'm glad you appreciate the trial and error! :) Thank you for watching 💗
Very helpful video for us beginners using molds. I've definitely learned from your mistake on what not to do because I love to reuse old candles too, so again thank you.
@joolieshome
Жыл бұрын
I'm so glad my video was helpful! Thank you so much for watching :)
Beautiful!!! Thank you so much for this video x
@joolieshome
2 жыл бұрын
thank youuu so much for watching :)
Thanks for the tips! Love your "many donuts later ... " Very cute : )
@joolieshome
2 жыл бұрын
Thanks for noticing :) They were def required for a long DIY lol ty for watching and leaving a comment!
Wow! First video I seen that explained the hole and the wick process but a whole lot more!!! Thank you!
@joolieshome
8 ай бұрын
Yay! I’m so glad you found the details helpful :) Thank you for watching!
@marie.swords
8 ай бұрын
@@joolieshome You're welcome! I follow you now!
thank you so much for sharing your trying different wax to making this molded candle
@joolieshome
Жыл бұрын
Thank you so much for watching! It was trial and error, but I eventually got it :)
Beautiful ! Thanks 🙏🏻
@joolieshome
2 жыл бұрын
Thank you so much for watching and leaving a comment :)
Such a satisfying video
@joolieshome
2 жыл бұрын
Thank you so much for watching! I'm glad they turned out in the end :)
This is extremely clever !
@joolieshome
Жыл бұрын
Thank you so much for watching!
Wow! They turned out so pretty! Love it!
@joolieshome
3 жыл бұрын
Thank you! ❤️
I loved your molds! I’m from Brazil! I do candles. Congratulation!
@joolieshome
Жыл бұрын
Hello! Thank you so much for stopping by my channel and watching all the way from Brazil! I'd love to see your candles, do you have a website/social media?
omg thank you so much for this!! i bought a few moulds awhile ago and am going to try making some candles this week! i had no idea container wax by itself might be too soft - luckily i bought both container wax from Michaels and thrifted some old pillar candles, i’ll be sure to mix them! great video!
@joolieshome
3 жыл бұрын
yay! so glad you found my video :) I didn't realize my container wax was that soft either, but I tried anyways. Thrifting candles is a good idea, maybe i'll try that too! Thanks for watching and leaving me a comment 💗
@Cherrixes
11 ай бұрын
Is soy wax better or container wax?
Super pretty 😍
@joolieshome
3 жыл бұрын
Thank you! ❤️
Thank you very much, dear lady, for your complete training My intention is to make and sell candles and with your good training I can do the job flawlessly thanks again❤
@joolieshome
6 ай бұрын
Thank you so much for your kind words :) All the best with your candle business!
@mohammadjavadhosseinzadeh5585
6 ай бұрын
@@joolieshome Thank you very much Also your success in work and life
Perfect💗
@joolieshome
2 жыл бұрын
Thank youuu!
Loved it
@joolieshome
Жыл бұрын
thank you so much for stopping by and leaving a comment :)
Thanks for sharing 🙏🏻
@joolieshome
Жыл бұрын
Thank you so much for watching and leaving me a comment! :)
So helpful
@joolieshome
2 ай бұрын
glad you found it helpful! Thank you so much for watching :)
Omg That was verry helpful thankuu 💗 , they look so beautiful too you nailed it 💗
@joolieshome
3 жыл бұрын
Thank you so much for the comment! I appreciate it 💗and I'm glad you found it helpful 😊
@lashanruchira9428
3 жыл бұрын
Do you want to buy cinnamon oil?
@joolieshome
3 жыл бұрын
for candle fragrance?
@lashanruchira9428
3 жыл бұрын
@@joolieshome yes
@joolieshome
3 жыл бұрын
I dont need any now, but I'll keep you in mind for the future 😊 do you have an etsy shop?
Amazing
@joolieshome
2 жыл бұрын
Thank you so much for watching :) 💗
かわいい!ほしくなっちゃう♡
@joolieshome
10 ай бұрын
私のビデオを見てくれてありがとう!もっとかわいいキャンドルを使った動画を制作中です😊近日公開予定です!
Oh wauw, they look lovely! I've also made some candles last weekend and mine don't look so lovely. They have a frosty shine around. Do you maybe have some advice for me? Am I doing something wrong?
@joolieshome
2 жыл бұрын
Thank you for watching :) hmm, I'm just a beginner at this, but I noticed pouring paraffin wax at a higher temperature decreased the frosting for me. I poured around 80C, I'm not sure what wax you're using but double check the recommended pour temperature. Hope this helps :)
You shouldn't have to trim the metal part at the end of the wick. There is a reason it is there. If you're gonna use these candles only for decoration then you don't need it, but if you're gonna burn them you need that metal part, it's not safe not to have it. You should add the anotation or something so people don't make a mistake maybe...? Nice candles btw. Great job!
@joolieshome
2 жыл бұрын
The metal sticker base is for container candles to place inside a jar. I don't usually see that metal base on pillar candles, but if it's required then you can definitely keep it on :) Thanks for watching! 💗
@HouseFlipperJenn
Жыл бұрын
@@joolieshome the metal bit prevents the string to float when the candle gets hot and liquid again, it's always better yo have it, container or not 😊
I hope I can work for you! Feeling so zen.
This is so helpful, thank u for the great content💖. Btw i made mine too but the finishing is bad, what do i do?
@joolieshome
Жыл бұрын
Thank you so much for watching! Sorry for the late response. If the candle has frosting, sometimes it's just the characteristic of the wax youre using, but make sure you're pouring at the right temperature which should be stated on the packaging :)
Great video and they turned out so well.. May I know what's the ideal pouring temperature if using pure soy wax? So that the bubble candle doesn't have crystals and cracks.. Also preheating the mould didn't work for me..
@joolieshome
2 жыл бұрын
Thanks for watching! I haven't used pure soy wax before so I'm not too sure what the ideal pouring temp is. Did the packaging have directions? That's prob the best place to start or google :) I had some issues with bubbles so I poured my paraffin wax at a higher temp and slower, but it wasn't pure soy wax. Hope they work out!
@ikkajchan
2 жыл бұрын
136 degrees Fahrenheit :)
This is great!! I have a question, how many mL of wax does it take to fill up the bigger bubble candle? Thank you!
@joolieshome
2 жыл бұрын
Thank you so much for watching! :) hmmm, i didn't get a chance to measure it in mL, but i found a conversion calculator online! I don't know how accurate it is, but it says 137g of wax is equivalent to 152mL. I hope that's right, let me know if it works out💗 www.aqua-calc.com/calculate/weight-to-volume
تحفة يعطيك صحة
Hi! I don't really understand the difference between container wax & pillar wax😳 I bought a mold and I want to use my old candles to make a pretty new one. Should I buy some soy wax & mix with the other wax from the candles?
@joolieshome
2 жыл бұрын
Hi! thank you so much for watching :) Container wax is soft and pillar wax is harder so it helps keep the shape of the mold. If your old candles are in containers like jars (container wax) then I'd buy some pillar wax to mix it together so it's harder. Just make sure you buy soy wax that is for pillar candles :) Good luck!
What were you rubbing the inside of the bubble mould with when preparing? mine just wont come out bubbly always flat!!
@joolieshome
3 жыл бұрын
oh no! I added a picture here 2:45- does the top look flat like the candle on the left? If so, you can have it rest inside a container like I did so the top of the candle doesn't touch the table. At 6:46 I'm just wiping off the water after washing the molds then I took some tape to remove any residual wax or dust. Hope this answers your question :)
I like it 😊
@joolieshome
3 жыл бұрын
yaayy thank you for watching and commenting ❤️
@nxxqpaanphutthaphonn5720
3 жыл бұрын
I will be your number 1 fanclub , from Thailand 😙
@joolieshome
3 жыл бұрын
wow all the way from Thailand! That's so exciting. Welcome to my channel :)
thank you! Did you oiled the molds while preparing or somthing else?
@joolieshome
Жыл бұрын
I didn't use any oil. They demolded perfectly out of the silicone molds :) Thank you so much for watching!
Heyy dear! Im literally so glad ro find this video rn as like many other viewers i also had no idea that the candle wax is itself so soft so the rebuild candles would be breakable. Thanks for saving me from an unwanted disaster ❤. I wanted to ask that if im making candle in any other container bcz i want to be creative and create cooler shapes so how would i know the quantity of wax to be diluted along with the old candles. Please reply. It would be of great help. 👍🏻 P.S I dont have any sort of weighing machine 😞
@joolieshome
Жыл бұрын
Hi! Thank you so much for watching ❤ Without any sort of weighing machine? hmm that sounds like a challenge. The best advice I can give you is to overestimate the amount of wax needed because you can remelt the leftover wax. Melt around 2 thirds of paraffin wax like I did and melt a third of any soft container wax you have. Fill your molds and if you have extra wax, save that for another project! Hope that helps!
Lindas 💓
@joolieshome
9 ай бұрын
muito obrigado 💓 Thank you so much for watching :)
Hey thank you 💜🩷I need to know which wax it’s the best for silicone mold?
@joolieshome
11 ай бұрын
Hi! thank you so much for watching 🩷 I've only tried a few different types of wax, but they all worked pretty well! As long as you use a pillar wax, I think you should be good :)
Hi may i know how many minutes do u boil the wax for cloud and magic ball candle?
@joolieshome
2 жыл бұрын
hmmm, i cant remember how long it took, but the pillar wax definitely took more time to melt than the container wax. Maybe closer to 10 min? If you cut the wax into smaller pieces they will melt quicker! Hope that helps 💗
잘 보았습니다..
@joolieshome
4 ай бұрын
감사합니다 😊
If you don’t have wicks use cotton strings.
@joolieshome
2 жыл бұрын
thank you for the tip!
Hello. Your candles came out great! What do you sit them on to burn 🔥 them safely?
@joolieshome
2 жыл бұрын
thankks for watching! You can burn them on an old ceramic plate or anything non flammable, but always keep an eye on it :)
@stephanievillalobos9835
10 ай бұрын
@@joolieshome hellooo what kind of wax do u use people are telling to use soy wax but i’m not sure 😢😢
What kind of wick do you use and what size? Thank you. 😊
@joolieshome
2 жыл бұрын
Thanks for watching :) I used 6 inch pre waxed wicks from amazon
What wax did you use for the 2nd try? 😊
@joolieshome
2 жыл бұрын
I used paraffin wax from Michaels :)
Maybe heat the knife you use to cut the paraffin wax next time. It will make it easier. 😊
@joolieshome
2 жыл бұрын
yes, that's smart! thank you for the tip! :)
can u pls let me know from where did you buy these moulds...actually i loved your video and got inspired ...pls it would be really great if u help me ...
@joolieshome
Жыл бұрын
Hi Sneha! Thank you so much for watching my video! I'm glad you were inspired to try it as well! I bought most of my molds from Aliexpress, but you can also find all of them on Amazon. I have some links in my description.
Thank you for video but How do I get the wax material and molds ..
@joolieshome
2 жыл бұрын
The molds i got from aliexpress, but if you want them quicker you can find them on amazon and the wax I got from michaels :)
Hi First of all, I’m a beginner in making candles whenever i pour the wax in the mold and let it dry, i end up with the candle full of air bubbles and I don’t know how to prevent that from happening
@alicewong8
2 жыл бұрын
you can try and pour the wax slowly into the mold it’ll help preventing the air bubble
@joolieshome
2 жыл бұрын
yup, like alice's comment below, you can pour slowly. Also depending on the wax you're using, make sure you're pouring at the right temperature. Hope that helps 💗
@rkeerthika484
2 жыл бұрын
May I know the right temperature.
@joolieshome
2 жыл бұрын
@@rkeerthika484 I think the paraffin wax I used noted to pour around 80°C. There should be a recommended pour temperature on the packaging for the wax you're using :) I'd stick with that just to be safe!
Hello ! What's your technique to prepare your molds?
@joolieshome
Жыл бұрын
Hello! I just wash them with soapy water and wipe them down with a cloth. Thank you so much for watching!
Hei ! Do you think paraffin wax is good for making candles (mold) or soy wax?
@joolieshome
2 жыл бұрын
Hei! I've only tried parafin wax and it's worked pretty well so far. If you use soy wax, just make sure you look for pillar soy wax :) I think people prefer soy wax because it's a natural product. I'd love to try it, but I didn't see it at my local Michaels. I'l have to find some online. Good luck with your candles! 💗
@donyaazarmina6486
2 жыл бұрын
@@joolieshome thank youuuu❤️
Hi!! What a perfect combination! Could you please tell me the formula so I know how many pillar wax and soy use? I didn’t understand how you calculated the quantities or did you use 80% pillar wax and 20% soy wax? I would appreciate your aswer!!!!
@joolieshome
2 жыл бұрын
Hi Monica! Thank you so much for watching my video 💗 Sorry for the confusion, I'll try to explain :) I used 2 parts pillar wax (around 66%) and 1 part soy (around 33%). I made one of each candle so I needed around 433g of total wax. 33% of soy wax would be around 143g and the rest would be pillar wax (around 290g). Hope this helps! I think 80/20 would work as well!
@monicaaguirre2897
2 жыл бұрын
@@joolieshome Thank u so much Joolie!! I’m trying my best!!! But my candles are full of bubbles, all around the surface, do u know what can I do or why is this happening? Again, thank u haha!
@joolieshome
2 жыл бұрын
@@monicaaguirre2897 oh noo!! I did a quick google search cause I'm def not an expert at this, but it says to double check you're pouring at the right temperature based on the directions of the wax and pour slowly. I also read to heat the container but we're using molds so I'm not sure how you'd heat up a silicone mold. I don't want to give you wrong directions :(
@Kookie-zc3gt
2 жыл бұрын
Is it necessary to mix pillar and soy wax? Can I just use only pillar wax?
@joolieshome
2 жыл бұрын
@@Kookie-zc3gt yes of course! You can just use pillar wax :) i originally wanted to repurpose my old candles but they were too soft so I added the pillar wax. The soy wax also gave it a nice buttery color.
Hi! Where did you buy the tools for doing candles??? 🥺
@joolieshome
Жыл бұрын
Hi! the tools are from amazon and most of the molds are from aliexpress but you can purchase them on amazon as well. They are linked in my description. Thank you so much for watching and leaving me a comment! :)
If we don’t have the heat measurement, how can we know if it’s time to make it mold? Or how many minutes do we stop?
@joolieshome
3 ай бұрын
Hi! to be honest, I haven't made candles without a thermometer so I'm not sure. If you're just melting candles at home like I did in this video, I think as long as the wax looks translucent you can try and pour it into your molds and demold the next day. If it doesn't work, just remelt it and try again? I recommend a thermometer if you're adding fragrances and dye chips to ensure the wax reaches a high enough temperature. Hope that helps!
wait this was your first time trying? they were so good
@joolieshome
2 жыл бұрын
it actually was my first time! I made a mistake with the container wax because it was too soft, but they ended up turning out ok with the pillar wax :) Thanks for watching 💗
Did you use a lubricant to lubricate molds?
@joolieshome
Жыл бұрын
I didn't, but that's good to know for future projects. I'll try it out next time! Thank you for watching :)
How much wax does the shell mold need to fill up?
@joolieshome
2 жыл бұрын
I used 134g of wax for my shell mold that's 9.2 x 7 cm. Thanks for watching! :)
where did you get your molds from?
@joolieshome
3 жыл бұрын
I got them all from aliexpress, but they took almost a month to deliver. I found them all on amazon as well if you need them sooner :)
which container was u were using for the square candle
@joolieshome
6 ай бұрын
You can get the molds from Amazon. Link is in my description, but I'll paste it here as well (amzn.to/3vd9MmC). Have fun!
So nice🤎
@joolieshome
2 жыл бұрын
Thank you so much for watching! :)
Bonjour magnifique vidéo 😮 d’où vienne vos moules s’il vous plais ? Merciii ❤
@joolieshome
Жыл бұрын
Bonjour! Merci beaucoup d'avoir regardé ma vidéo. Les moules ont été achetés chez Aliexpress. Vous pouvez également les trouver sur Amazon. Les liens sont dans ma description.
Do you provide a holder as well? When it melts where does the wax go?
@joolieshome
2 жыл бұрын
Yes, definitely melt them on a non-flammable plate or coaster so the wax doesn't spill over :)
hi where did you get your little container from?
@joolieshome
Жыл бұрын
Hi! the container to hold the candle? I got that from a take out meal hehe but you can use any kind of container to lift the mold off the table. I know some people also just use a thick kitchen towel as well which seemed to work. Thank you for watching!
How do you prep the moulds?
@joolieshome
2 жыл бұрын
I cleaned them with soap and water and dried them. If I saw wax or dust residue, I took a piece of tape and lifted it off the surface :)
Can you tell me where to get those shapes silicone cups?
@joolieshome
2 жыл бұрын
Products: 🔹pre-waxed wicks: (amzn.to/3bOo70c) 🔹Pillar wax: (www.michaels.com/simple-seren...) 🔹Shell mold (amzn.to/3lLqIgM) 🔹Cloud mold (amzn.to/2YPOwaC) 🔹Bubble mold (amzn.to/3vd9MmC) 🔹Knot mold (amzn.to/3BPXbIA) Thanks for watching!
Hi Love from India Where can i get these moulds?
@joolieshome
2 жыл бұрын
Hi! Thank you so much for watching from India :) I got these moulds from Aliexpress, but they aren't available from the seller anymore. I linked similar ones from Amazon in my description 💗
How do these burn without making a mess?
@joolieshome
2 жыл бұрын
I haven't used them yet, but from what I see on other channels, the melted wax spills over. I'd place it on a dish and keep an eye on it while it burns :)
please let me know where I can buy the moulds? thankyou
@joolieshome
Жыл бұрын
The links are in my description, but I'll add them here as well :) 🔹Shell mold (amzn.to/3lLqIgM) 🔹Cloud mold (amzn.to/2YPOwaC) 🔹Bubble mold (amzn.to/3vd9MmC) 🔹Knot mold (amzn.to/3BPXbIA)
@MOCHESSRCHAN_
Жыл бұрын
@@joolieshome thank you so much :)
Which wax you use for these candles
@joolieshome
4 ай бұрын
I just used leftover candles from home and mixed them with paraffin
Nyc
Can I use only soy wax to make a silicone candle mold? At what degree Celsius can I pour it into the mould?😢
@joolieshome
Жыл бұрын
Hi! Yes, you can use only soy wax to make these candles, as long as it's for making pillar candles. It should say what the pour temperature is on the packaging. Here are a couple options I found online and their pour temperatures: Pillar Soy Wax (BW-921) Pour at 170°F (76.7°C) EcoSoya PB Pillar Soy Wax Pour at 160°F (71.1°C) Hope this helps you get started! :)
Is it the yellow color of the wax ?
@joolieshome
2 жыл бұрын
yes, one of the candles I melted was yellow :)
Is it necessary to add Pilar wax
@joolieshome
Жыл бұрын
Hi! You can use any pillar wax to make these candles without the container wax. If you are reusing old candles that are made with container wax, then yes, you will need to add a harder wax like paraffin or else they will be too soft. Hope that helps 🤍
Where did you get the needle?
@joolieshome
2 жыл бұрын
The needle is actually from a clay tool set I purchased on Amazon :) Thank you for watching!
Websites to buy these moulds from?
@joolieshome
2 жыл бұрын
You can get them all from amazon :) Links are in my description, thank you for watching! 🔹Shell mold (amzn.to/3lLqIgM) 🔹Cloud mold (amzn.to/2YPOwaC) 🔹Bubble mold (amzn.to/3vd9MmC) 🔹Knot mold (amzn.to/3BPXbIA)
From where we can get this candle mold please help
@joolieshome
Жыл бұрын
Hi! I have them listed in my description as well, but here you go: 🔹Shell mold (amzn.to/3lLqIgM) 🔹Cloud mold (amzn.to/2YPOwaC) 🔹Bubble mold (amzn.to/3vd9MmC) 🔹Knot mold (amzn.to/3BPXbIA)
where do you buy your molds ?
@joolieshome
Жыл бұрын
Hi Krystal! I bought most of them from Aliexpress, but you can also find them all on Amazon as well. They are linked in the description. Thank you so much for watching!
Hello can someone tell me where i can order this silicone shapes for candles? Thanks in advance
@joolieshome
Жыл бұрын
Hello! They're all linked in my description, but I'll copy the links here as well: 🔹Shell mold (amzn.to/3lLqIgM) 🔹Cloud mold (amzn.to/2YPOwaC) 🔹Bubble mold (amzn.to/3vd9MmC) 🔹Knot mold (amzn.to/3BPXbIA)
@nebojsasaicic6170
Жыл бұрын
@@joolieshome thank you so much for information 🤗
How to prevent frosting?
@joolieshome
2 жыл бұрын
according to google, it says to mix the melted wax slowly, preheat the container, pour wax at a lower temp. Hope that helps! :)
Donde consigues los moldes?
@joolieshome
2 жыл бұрын
Amazon :) 🔹Shell mold (amzn.to/3lLqIgM) 🔹Cloud mold (amzn.to/2YPOwaC) 🔹Bubble mold (amzn.to/3vd9MmC) 🔹Knot mold (amzn.to/3BPXbIA)
Can you tell me where to buy this tool?
@joolieshome
Жыл бұрын
Hi! the molds I purchased are from aliexpress, but you can buy them from amazon. The links are in my description. Thank you for watching!
Where did you get these silicones?
@joolieshome
3 жыл бұрын
I purchased them all from Aliexpress. It took about a month to ship but I have seen most of the molds on amazon as well if you want faster shipping :)
@dustit0ff
3 жыл бұрын
@@joolieshome thank you sm🤍
Where i can buy sillicon?
@joolieshome
Жыл бұрын
Most of the molds are from aliexpress but you can purchase them on amazon as well. They are linked in my description. Thank you so much for watching and leaving me a comment! :)
Can you make a candle without mold please 😊
@joolieshome
Жыл бұрын
Yes! I am working on some candle jars and will post them soon :) Thank you for stopping by and watching my video 🫶
@vaishalisonar6326
Жыл бұрын
@@joolieshome thanks 😊
god bless u xdd
@joolieshome
Жыл бұрын
Thank you so much for watching and leaving me a comment :)
พี่คะถ้าหนูละลายเทียนแล้วใช้ไม่หมดแล้วเทียนมันแข็งไปแล้วหนูสามารถเอาไปอุ่นใช้ไหม่ได้ไหมคะ
@joolieshome
2 жыл бұрын
yes! you can melt the wax and use it again :)
from where i can buy this molds?
@joolieshome
3 ай бұрын
You can purchase them from Amazon. If you don't mind waiting a bit longer, you can also find them on Temu, Aliexpress etc. Hope that helps :)
You can use an eye large needle 🪡 it will be easy for you
@joolieshome
2 жыл бұрын
thanks for the tip! I'll try it when I buy wick from a spool 💗
Can you send to me ethiopia all material i wanna make those candels 🙏🙏🙏😍😍
hye, may i ask.. is it okey if i use 100% soy wax?
@joolieshome
2 жыл бұрын
hi! yes, you can use soy wax as long as it's for pillar candles. I have seen other youtubers use soy wax for containers and it seemed fine, but the container wax that I melted was too soft and melted in my hands. To be safe, look for pillar soy wax 💗
@nurulfarahheliyana2613
2 жыл бұрын
@@joolieshome thank you sho much!!
@joolieshome
2 жыл бұрын
@@nurulfarahheliyana2613 no problem! I'm just a beginner, but if theres anything i can help with, lmk! 💗
It’s hard to read the small white letters
@joolieshome
2 жыл бұрын
You're not wrong! I'll upload future videos with clearer subtitles. Thanks for the feedback 💗
But where can I get these shapes??😐🌚
@joolieshome
Жыл бұрын
All the links to the molds are in my description, but I'll paste them here :) Thanks for watching! 🔹Shell mold (amzn.to/3lLqIgM) 🔹Cloud mold (amzn.to/2YPOwaC) 🔹Bubble mold (amzn.to/3vd9MmC) 🔹Knot mold (amzn.to/3BPXbIA)
What material is ?
@joolieshome
Жыл бұрын
I reused old candles made of soy and paraffin wax and then added pillar wax made of paraffin to make the candles harder. Hope that answers your question 🤍
@pattozgriveer5558
Жыл бұрын
@@joolieshome hi joolie Thanks for answer. Your video is to much satisfiers. Beautiful work. Greetings from Argentina 🇦🇷😘
@joolieshome
Жыл бұрын
wow! My video reached Argentina! Thank you so much for your kind words. Muchas gracias por sus amables palabras 🫶 Hope to hear from you again! :)
Sorry 🙏🙏
JESUS LOVES YOU ALL ❤
I need some help can you help me
@joolieshome
2 жыл бұрын
sure! how can I help?
Can i ask? Soy wax or bee wax plz
@joolieshome
20 күн бұрын
Yes of course! I melted old candles and some were soy wax, the others were probably a soy & paraffin blend. I didn’t use any beeswax for these candles. Hope that helps :) Thank you for watching!
Le mie escono piene di buchini ,perché??? 😔
@alinanicoara2924
Жыл бұрын
Eccoooo,adesso ho capito.. si deve mischiare 2 tipi di cera,soia e paraffina... sei la mia salvezza 🤩
@joolieshome
Жыл бұрын
SÌ! Ho dovuto imparare a mie spese, ma se mescoli una cera più dura (pillar wax), allora funziona! Grazie mille per la visione :) (Ho usato google per tradurre la mia risposta. Ci scusiamo per eventuali errori) ❤️
@alinanicoara2924
Жыл бұрын
@@joolieshome non si deve assolutamente scusare ,e tutto coretto grazie mille ❤️
Spunemi te rog pentru 50 de bucăți de cită ceară este nevoie
@joolieshome
Ай бұрын
Bună! Puteți înmulți cantitatea de ceară de care aveți nevoie pentru o lumânare cu 50 :) Dacă doriți să adăugați parfum, atunci ar trebui să luați în considerare aceasta în măsurători.