Thanks bro just got me a 2nd gen pathfinder had a 3rd gen explorer lifted it myself rolled it over got this I'm confident on lifting it tomorrow thanks to you

@Offroadfarm1

3 жыл бұрын

Good luck and thanks for watching

@bertrandbarras8654

3 жыл бұрын

Thanks for the tips

Thanks for your videos. We have very similar trucks. You are a few months ahead of me. I'm cheating by watching your videos before I install something 😄. I removed my truck bed today, installing shackle flip tomorrow.

@Offroadfarm1

5 жыл бұрын

Glad you like the videos and thanks for watching. Good luck on the shackle flip

Friend I would have to say you must live in a snow state that uses lot of salt from seeing them rocker panels all eatin away nonetheless I was thinking about doing a lift on my newer truck probably a 3" some people talk them down but I like them being gives more clearance for bigger wheels most people sway towards suspension lifts though there are too many problems with that rougher rides, drive train & alignement issues, the biggest complaint that people have with body lifts is the gap between frame & body which can be easly fitted with plastic mud flaps cut to fit not a big deal but some people dont attempt to remedie a problem they just want to complain about it..

@Offroadfarm1

3 жыл бұрын

I'm in Tennessee, not exactly a huge snow state. The guy I bought the truck from said he bought it from DOT. So maybe they used it around the salt piles? Body lifts do have a bad reputation, but they certainly have their place. Good luck with your lift and thanks for watching!

@lethargicmotorsport2025

3 жыл бұрын

Them old Square Bodies were made outa rusty metal

My Mazda has bolts coming down from the cab. Not nuts in the cab. Haven’t figured out how to do this yet.

Were I can buy that kit ?

Man I gotta do this

@Offroadfarm1

3 жыл бұрын

DO IT!

@diesel1586

3 жыл бұрын

I didn’t see the body mounts on the site thoigh

@Offroadfarm1

3 жыл бұрын

@@diesel1586 www.offroaddesign.com/exterior-armor/body-lift-kits.html Try out this link

I have a manual truck would this be affected by the 1 inch body lift either shifter ?

@Offroadfarm1

3 жыл бұрын

A 1 inch body lift shouldn't. Your shifter will be lower in the cab but it should still function properly. Thanks for watching

Would they work for an obs suburban?

@Offroadfarm1

Жыл бұрын

Yes you should be able to find a body lift for a OBS burb easily. Thanks for watching!

Your truck is older which is piece cake to put everything in but I have a 2017 tacoma the bed would be easy but front end way too much to remove & modify especially the fuse box wire harnesses & brake lines.

@Offroadfarm1

4 жыл бұрын

Agreed! older vehicles are much easier to work on. Thanks for watching

my car's body was leaning on left side and i notice that the body mount in front left is quite loose than on the other sides and mounts. Is that the culprit why my car is leaning on left? we change the shock and the spring are all same compressed as on the right side

@Offroadfarm1

2 жыл бұрын

It could be. Park your car on a flat level surface, then measure from the ground to your frame on both sides of the car at a common point. Next measure from the ground to a common point on both sides of the body. If your frame measurements are the same then you know it has to be a body mount issue. I would also look carefully at that loose body mount. Compare it to the other mounts, maybe some of the rubber has deteriorated and that is why it is loose. If that is the case then it will need to be replaced. Good luck and thanks for watching.

@masterofuploader4

2 жыл бұрын

@@Offroadfarm1 hey thanks bro. Yes it is body mount and now it is making noise when i am riding. This helps a lot. Going in to replace it thankss broo

What about on a 3 inch body lift on 77 silverado

@Offroadfarm1

4 жыл бұрын

I've never installed a 3 inch body lift so I can't say for sure. But based on some quick google searches it looks like some people have been able to install them without modifying the steering column and some have not. (I hope you were asking about the steering column) If it is not a daily driver then give it a shot and if it doesn't work you should have some time to modify it. Thanks for watching!

If I buy this kit can I stack 2 of them together to make it a 2” lift?

@Offroadfarm1

2 жыл бұрын

The bolts in the kit are not long enough for that. It would be better to just buy a 2 inch lift kit. Off-road design doesn’t offer a 2 inch body lift but there are other companies that do. Thanks for watching!

Hpw about rear? Does the kit include things for rear?

@Offroadfarm1

3 жыл бұрын

Yes it has all the bolts, washers, nuts, and lift pucks needed for the bed as well. Thanks for watching

But did you fix the rust?

@Offroadfarm1

4 жыл бұрын

Are you asking about the rockers? If so then, yes. I installed the body lift before working on the floor pans and rockers to get them a little higher.

Great vid thank you ! Is that an Apple Watch ? Which cover is it bud ? Cheers

@Offroadfarm1

4 жыл бұрын

Thanks for watching. Here is a link to the apple watch cover. amzn.to/33cLmfx

Will this work on my 93 d21?!

@Offroadfarm1

2 жыл бұрын

There are body lift kits available, give one a try. Thanks for watching!

How much to do mine? Take my money

@Offroadfarm1

3 жыл бұрын

Give it a try, it should be easy

Hi,where can i buy that lifter kit?

@Offroadfarm1

2 жыл бұрын

Lift kits here: www.offroaddesign.com/exterior-armor/body-lift-kits.html Body mounts here: www.offroaddesign.com/exterior-armor/body-mount-kits.html Thanks for watching!

Where did you get the body mount kit (not body lift) the rubbers

@Offroadfarm1

2 жыл бұрын

I got the lift and the new body mounts both from offroaddesign.com They also offer just the mounts. Check them out here www.offroaddesign.com/exterior-armor/body-mount-kits.html Thanks for watching!

What did u do about the steering column

@Offroadfarm1

4 жыл бұрын

There was enough slack in the steering column to install the lift with no issues. Thanks for watching

How long did it take ?

@Offroadfarm1

3 жыл бұрын

Not very long. If you weren't worried about trying to video the process I would say less than 3 hours. Thanks for watching