DIY Bathroom Vanity // Small but spacious - plans available
Today it's time for a stylish, modern vanity build. It's a straightforward project that can transform your bathroom, and can be adjusted in size and colour to fit your space, check it out!
Plans - jessedoesdiy.e...
Help support the channel and the things I can show by using the links below, it costs nothing to use them, but helps me out so I can help you!
Check out Starbond CA adhesives! Use "CANADIYAN" for a discount!
bit.ly/3t18eud
- Tools/Materials Used (affiliate)
For Canadian buyers:
TP Tools Hardware Jig - amzn.to/3tmGH8J
Circular saw jig - amzn.to/3GW2nOy
Pocket hole jig - amzn.to/3NV4HHO
Dowel jig - amzn.to/3GYxY20
Dowel jig - amzn.to/39biWtj
Door router bits - amzn.to/3xb9pKI
Hinge jig - amzn.to/3aylu4S
Hinges - amzn.to/397XC8b
Drawer slide - amzn.to/3H5CXOr
For USA buyers:
TP Tools Hardware Jig - amzn.to/3NVCKQb
Circular saw jig - amzn.to/3NwTu0q
Pocket hole jig - amzn.to/3mtZ1IV
Dowel jig - amzn.to/3mtZwTj
Dowel jig - amzn.to/3NrFFjJ
Door router bits - amzn.to/3zuoaLg
Hinge jig - amzn.to/3MsGc3J
Hinges - amzn.to/3xpF3Fv
Drawer slide - amzn.to/3xt24aV
**************************************
Jesse Does DIY links:
🛠Email: jessedoesdiy@gmail.com
🛠Project Plans: jessedoesdiy.e...
🛠Instagram: www.instagram....
🛠Instructables: www.instructab...
Other Channel with Slade:
/ @jessefleming9763
Пікірлер: 44
If building bathroom vanities were a country, you sir would be king! Thanks so much for the great demo. Love your dog!!
@JessedoesDIY
6 ай бұрын
Wow, thanks lol I'm glad you like it! I love hime too, he's pretty awesome. I'll let him know you said that!
@acreguy3156
6 ай бұрын
@@JessedoesDIY 👍 🐶
Excelente video ! I love the way you build cabinets . Learned a lot . And really appreciate the honesty of the video showing the mistakes and how they were corrected
@JessedoesDIY
10 ай бұрын
Thanks very much! I'm glad you found the video helpful
I'm waiting for the write up to start working on this project. Thanks.
@JessedoesDIY
Жыл бұрын
Thanks for watching, I'm glad you like it. I'm actually working on my website right now with plans and a write up. Hopefully in the next couple weeks.
Rome wasn't built in a day. Looks great
@JessedoesDIY
Жыл бұрын
True that. Thanks!
Looks great. I'm looking to build a small vanity too, so this is perfect timing. I just need to figure out how to taper the legs.
@JessedoesDIY
2 жыл бұрын
Thanks, glad you liked it! Hopefully I'll have the write up for it out this weekend, with measurements. Yeah I wish I could taper these, but I don't have a big enough table saw. Jon Peters actually released a video recently on adding a small taper with a miter saw to the legs on some planters. I almost did it to this but didn't in the end, kinda regret it
This looks so good! I am definitely getting my husband to build me one too! Also great filming quality, video looks great!
@JessedoesDIY
2 жыл бұрын
Thanks so much! Glad you liked it
@VersaceUnderwear
Жыл бұрын
What kind of paint did you use?
With the price of lumber in 2023 still, I'm not sure if one can build this for less than buying a vanity. Unfortunately. I mean plywood is still pretty expensive yet. And it looks like you are using the "pre-milled" poplar boards from a big box store, which can be pricey too. (if you don't have a jointer and planer it can save a lot of time to just buy premilled but you pay probably 2x the cost of even a hardwood dealer) . However, if you have to customize something then it makes sense to build it.
@JessedoesDIY
Жыл бұрын
Yeah, I never said it was cheaper because it wasn't. But it of much higher quality and much much sturdier than any vanity you could buy in store which is worth something too.
Oooh...I've been wanting to venture into the world of routers! Would love a video on your experience and product recommendations!
@JessedoesDIY
2 жыл бұрын
I was thinking of doing that but I have no ETA right now on when it'll be done unfortunately. Too much other stuff to get done while our very short summer season is here
Beautiful!
@JessedoesDIY
11 ай бұрын
Thank you!
Well done!!
@JessedoesDIY
Жыл бұрын
Thanks!
Looks awesome 👍
@JessedoesDIY
2 жыл бұрын
Thanks!
Looks great. Working on it now. Never painted plywood before. What grit do you prefer to sand to before painting?
@JessedoesDIY
4 ай бұрын
Thanks, glad to hear it! Honestly just 120 grit is fine because your going to sand the primer and maybe the first coat of paint yet after and that's where the smoothing comes from
@noyesharrigan6217
4 ай бұрын
Thanks for the response. Finished the build from your plans, which were great. I’m painting now. Will upload a photo to Etsy when project is finished.
@JessedoesDIY
3 ай бұрын
Anytime. I'm glad you liked the plans. Awesome, I can't wait to see it!
Great job. Where can I get step by step plans?
@JessedoesDIY
6 ай бұрын
Thanks! The plans are linked in the description, or you can go to Etsy and search for my name JesseDoesDIY
In Puerto Rico the majority of vanities are made of pvc. Have you thought about doing a project using pvc? I was thinking that the drawer in your vanity is going to get wet in case of a water leak. What about a vanity made with wood but the drawer box made of 3/4 pvc panel, and its face made of wood? Thanks.
@JessedoesDIY
Жыл бұрын
Really? Thats different than here. We have very limited pvc that I could buy here, and it's very very expensive, mostly outdoor materials here and no sheets. The chances of a water leak are always there, but pretty low here.
Amazing job man. What was the purpose of setting the drawer front in there when you were Measuring the drawer slides? Was it to determine the set back measurement for the slides?
@JessedoesDIY
Жыл бұрын
Thanks dude! Yup, that's exactly what I was doing, plus another 1/8" back
what type the router do u use?
@JessedoesDIY
Жыл бұрын
The router and table are Mastercraft. It's a in store brand in Canada.
Where the hell have you been? Thought you’d be CanaDOAn! 🤣 I get it, some projects just suck the life out of you. Have been trying to perfect a dual planter with bench in between and it’s been kicking my ash! 🤣 But it’s almost done. Anyway, have had problems finding the best tongue/groove bits. What worked for you???
@JessedoesDIY
2 жыл бұрын
I've been struggling with this thing and the top for it lol as it is the top isn't done yet and I admitted defeat and decided to just release this lol Yeah hey, sometimes they just fight you. Then you just need to step back and come back at it another time. Hopefully you get er done, it's planting season lol I linked the exact bits I used in the description. It was the Freud adjustable bits, expensive but man they worked amazing. These are even made for undersized plywood which my first bit set wasn't so the center panel was a little loose. Was annoying but I'm actually glad it worked out this way now. Thanks for keeping tabs!
@ifiwooddesigns
2 жыл бұрын
@@JessedoesDIY Thanks! BTW, that vanity looks amazing and love the color. Cement is tricky, don’t know your issues but I’ve done them with plain cement, grating, chicken wire and even rebar. Polishing cement is another story. Ok, maybe I’ll finish planter before end of summer! 🤣 I’ll race you to getting it done before your cement top! Keep up the great videos, you rock!!!
@JessedoesDIY
2 жыл бұрын
Anytime! Thanks man, I'm pumped with how it turned out. It's weird because I've done lots of concrete tops before, but I've never had so many issues as this, I've even been in vintage with quikrete to figure out the problem. Lol better hurry then, planting and sitting in the sun season are upon us. I'm pouring the next top this week!
@ifiwooddesigns
2 жыл бұрын
@@JessedoesDIY I’m sure you’ve tried flow control. There’s a great channel mostly about concrete, and I’ve learned a lot from him. Try it out… Michael Builds.
@JessedoesDIY
2 жыл бұрын
I've got some right now I'm going to add. Quikrete says they have some in the mix already and isn't needed, but that has not been my experience. I've seen his channel, unfortunately he has a lot of incorrect info on concrete. They may turn out ok but I wouldn't count on his projects lasting without curling or cracking
Good Job!!!
@JessedoesDIY
Жыл бұрын
Thanks!