DIY Automatic Boot, Trunk Lid Open, Hatch Pop Alfa Romeo Giulietta
Автокөліктер мен көлік құралдары
In this video you can see DIY boot opening mod.
Disclaimer: ARC Garage is not responsible for any work you perform on your car. If you're not confident in your mechanical and electrical skills, we suggest you take your car to a professional.
Пікірлер: 120
Just did this to my Giulietta using 45mm springs. Works like a charm. Used 40mm first but not strong enough. Thanks for this awesome practical DIY hack!
@arcgarage
Жыл бұрын
You're welcome, glad you got it sorted
Hi bro,I just want to thank you for your very informative and helpful uploads.Greetings from 🇵🇱!
@arcgarage
Жыл бұрын
Glad you like them, thanks for support, greetings
Simple yet excellent diy project. Thanks for the upload.
@arcgarage
Жыл бұрын
Thank you. Cheers!
The video Giulietta hacks & tricks was very usefull I really want a part 2 . Keep up the work,respect.
@arcgarage
Жыл бұрын
Thank you very much for support
Svaka čast, ovo ću sigurno da uradim na mojoj Giulietta-i.
Effective, simple and cheap, bloody marvellous.
@arcgarage
Жыл бұрын
Thank you
Nice work, hope this will work on my 166!
Like always,u r doing great video's! Thank u man
@arcgarage
Жыл бұрын
I appreciate that, thanks for watching
Svaka cast na ideji.. odlicno odradjeno.. super video.. pozz
@arcgarage
Жыл бұрын
Hvala puno, pozdrav
Great upgrade. Thank you for sharing. I will advise this to my friend.
@arcgarage
Жыл бұрын
Thanks
Nice DIY projects, and all simple work longer. 👍
@arcgarage
Жыл бұрын
Yes, thanks
Very nice, i know what i’m gonna do the upcoming week😉
@arcgarage
Жыл бұрын
Thanks. Have fun!
Thank you very much i will try it to my Giulietta... very nice video
@arcgarage
Жыл бұрын
You're welcome 😊
Svaka čast! Pozdrav iz Srbije!
@arcgarage
4 ай бұрын
Pozdrav veliki iz BIH
Well thought of and developed.
@arcgarage
Жыл бұрын
Thanks
Bravo svaka čast 👌
Awesome video!
@arcgarage
Жыл бұрын
Thanks
Bloody brilliant 👏,
@arcgarage
Жыл бұрын
Thanks
After some time the strain on the lock causes it to bend. Some people also reported deformations of the trunk cover, caused by the forces it must withold with those springs, while it's closed. Give it a year or two.
@arcgarage
19 күн бұрын
These have been on the car close to 2 years without any issues
Perfect!
Great video, How long do the springs need to be for an Alfa Romeo Mito?
Super 😮❤
Would love to just buy both the hole rod assembled second hand, you could definitely earn a little seeling those in alfa groups
Excelent as always ! I remember you did a same dyi for the 147 too.. I am wondering if that trick will work on GT too. Could be a great trick .. Keep the great work my friend ! 👍
@arcgarage
Жыл бұрын
I did, it is not going to work for the GT, I tried it
@alfaholicsgreece
Жыл бұрын
@@arcgarage Pity !! I guess very heavy trunk lid and different angle of the absorbers ..Damn it hehehe
@arcgarage
Жыл бұрын
Exactly
@arcgarage
Жыл бұрын
@@brianmelcarr Hahahaha
@nurel-sobky2505
Жыл бұрын
@@arcgarage yeah I tried it too with Tesla springs but no luck :(
Super
WOW great hack!!!!
@arcgarage
Жыл бұрын
Thanks
Great video very smart DIY hack , what size were the springs. Did you get the measurement from the wear marks on the struts for your spring cut size?
@arcgarage
Жыл бұрын
Thanks. You got the measurements in the video
Inwant to do this on my 159 sw but my boot struts are to powerfull and have no brake at the end..they just lift like mad if i dont hold the boot..i.m afraid it will break from the welding points
What is the inner diameter of the rubber washer ???
Hi ArcGarage, Are you going to be doing the Alfa Romeo 147 Bose retrofit instal video someday? I'm sure that you will help A LOT of people with this (especially me)
@arcgarage
Жыл бұрын
Looked for it couldn't get complete set sadly
Fantastic, shame not useful in all kind of cars (as GT´s, not?). Very good idea👌
@arcgarage
Жыл бұрын
Yes, true, did my best do to it on a GT but it was impossible
i have a 1.3 mito diesel ,any change in the dimension of the spring?Can you make one set for me (i pay for)
Does this not hurt the latch mechanism at the bottom? It seems like this way there's always a pull on the boot upwards. Basically you try to open it even if it's closed.
@arcgarage
Жыл бұрын
I didn't have any issues with my 147, and it had the same setup for couple of years
What kind of springs should I ask for at the store? What are they used for?
@magnuswf
Ай бұрын
In case you haven't figured out yet, I might give a hint. I'm looking for springs for my own and found some similar on eBay by searching trunk strut spring for opening. Don't know which ones are to be preferred, but maybe it'll help you in your search😊
Odlican video. Sta mislis da li ce se sabiti opruge tokom vremena. Koliko dugo ga ti koristis?
@bane11000
Жыл бұрын
Od cega si uzeo opruge?
Dış çap 20mm Boy 45mm Spral sayısı 7 adet Tel kalınlığı 3mm
Pozdrav, radi li na alfi 159?
Hey, I did this to my Giulietta a couple months ago and worked like a charm. Recently it's not been opening by itself anymore. I changed the struts for new ones again and no luck. Any idea why?
@blyat420
Ай бұрын
Probably has something to do with the springs, they can lose gheir elasticity over time
what is the force of the hydraulic cylinders? Mine in 410 Nm are not sufficient, the trunk only opens halfway, maybe better with 420 Nm?
@arcgarage
Жыл бұрын
Not really sure, but you either need stronger springs, or more powerful struts
Pozdrav od alfiste iz slo
@arcgarage
7 ай бұрын
Pozdrav veliki
hey man! i want you to answer me a question.. u can change on the GT the gasket of the cover from the healight (xenon) because my healight go foggy… or i can put from the non xenon, or where i can find it ? has a code to find and buy?
@arcgarage
Жыл бұрын
They are glued in place
Bonjour je voudrais savoir les pièces qu'il faut Pour faire ça s'il vous plaît 😢
Pozdrav drug, super posao. Jedino što me zanima gdje si našao te gumice dole koje zaustave feder da sklizne dole kada zatvaraš? Jer ne znam šta bih stavio tu da pod pritiskom ne sklizne sve dole mora nešto jako biti.
@arcgarage
Жыл бұрын
Ovo su ti kao gumene podloske kupljene u prodavnici alata, ali isto mozes da iskoristis i gumene dihtunge za razlicite svrhe
@DuskoLepir
Жыл бұрын
@@arcgarage Šta mišliš da li su neke hidraulične gumice ili podloške bolje? Da su manje mogućnosti da se istroše ili potrgaju?
I'm not understanding how the bottom support of the spirng stay in place. How it cannot slide down?
@arcgarage
Жыл бұрын
That's what the rubber washer is for
But if you click the unlock button on the remote (not only the rear one) will not open the back automatically?
@Legend1315
6 ай бұрын
No, unlocking the car normally makes it possible to open the boot by pressing on the badge but doesn't actually open it. There is one button specific for opening the boot that does the same as pressing the badge.
❤
Is this also possible with only strong gas springs?
@arcgarage
Ай бұрын
Don't think it is
I have a problem on the Alfa 159. The switch for opening the fifth door when the temperature is 25 or more degrees C works perfectly, however, as the outside temperature drops when I press the switch, it takes more and more time for the door to open. Below 5 degrees C, the switch no longer works. otherwise, the door opens remotely without any problems. Also, below 5 degrees C, I can't open the car with the remote key. I enter the car with a mechanical key and after 10-15 minutes of driving, the central locking works. The car has a new battery. In summer, this problem does not exist. otherwise, the car starts in summer and winter without any problems. Help me.
@arcgarage
11 ай бұрын
You have to diagnose the issue
Hi Do you have the dimensions for the springs for an Alfa Mito 2009 as well ? Best regards
@arcgarage
Жыл бұрын
Hi, I don't have dimensions for Mito
I’d like to do this on my GT but would think the rear hatch and screen are probably just too heavy 😔
@arcgarage
9 ай бұрын
Tried it out, and you're right it is too heavy
@TheSeeka
9 ай бұрын
@@arcgarage 😔
Which springs did you use?
@arcgarage
Жыл бұрын
Can't give you exact specs, just bought them at the hardware store
Hi, do they only exist for Alfa Romeo? Thank you
@arcgarage
9 ай бұрын
For other makes as well
@alebebu
9 ай бұрын
@@arcgarage Do you have a website or contact mail?
Can this be done on a GT or is it too heavy
@arcgarage
Жыл бұрын
Not enough room for the coils, and the boot lid is too heavy
@kingham61ki
Жыл бұрын
@@arcgarage thought so Thank you anyway Great work
@arcgarage
Жыл бұрын
@@kingham61ki Thanks
Pas d'infiltration d'eau ?? Même chose dans 159 sw provoque après certains temps infiltration d'eau par jointure de tolle dans coin en haut de pilier.
@arcgarage
Ай бұрын
No problem with water whatsoever
kako si zadovoljan sa alfom i koji je motor ?
@arcgarage
Ай бұрын
1.4 88kw, bez multiair jedinice, moram da priznam da sam za sada prezadovoljan
@Denis-qj9sy
Ай бұрын
@@arcgarage a kakvi su 1.6 jtdm 105 ks cuo sam da imaju problema sa gumicom uljne pumpe kao 2.0 jtd cdti da li je to istina
J'ai fait tout comme tu as fait et mon coffre s'ouvre a peine de 5cm :( pourquoi stp ?
@arcgarage
Жыл бұрын
Your springs are too weak
@arcgarage
Жыл бұрын
You also got to make sure that your struts are in good working order
@NitroDevils
Жыл бұрын
maybe that's the problem then? Are the cylinders of the aillons worn?
@NitroDevils
Жыл бұрын
thank you for answering me 😉
@arcgarage
Жыл бұрын
@@NitroDevils No problem, they lose strength over time
Di si kupio ove opruge? Ne mogu ih nigdje naci
@arcgarage
Жыл бұрын
U prodavnici alata
Lol just buy stronger gas shocks and replace them with the stock ones much easyer
@arcgarage
8 ай бұрын
That won't work
"promosm"
I've heard that when done to a Mito, there is a risk of damaging the trunk lid - I have heard that it can bend the lid... Do you have any experience with doing this on a Mito?
@arcgarage
4 ай бұрын
Hi, didn't try it on the Mito
Thank you very much i will try it to my Giulietta... very nice video
@arcgarage
Жыл бұрын
You're welcome 😊