Thanks for posting this homie!

Is there a cheap water catcher for a air compressor. I like to make you AC flusher but I have a 3-4 HP air compressor but don't want water to get inside the evaporator.

How many microns do you usually pull down a vehicle a/c system to?

Can I use acetone to flush the lines....?

And did u use a air compressor piece for the bottom part

What's the length of it

Make a video how to build it

How many psi do use ?

Should work on a fridge/freezer condenser, as they're more or less a length of copper tube, right?

@gautorepair

3 жыл бұрын

It should. As long as its a continuous tube

$25 Amazon comes w/ gauge, hose & attachments

@gautorepair

3 ай бұрын

But i promise you it doesn't hold the volume the diy hold. You'll be refilling every 2 minutes. That gets annoying quickly if this is something you do every day. If not then no biggie

Ditch the cheap Koehler clamps and get yourself some breeze clamps, way better quality.

@gautorepair

3 жыл бұрын

Thanks. Ill look into this

Can u make a vacuum diy

Or you could just use funnel then air gun to blow it out.

You can buy them on Amazon currently for about $33, or for occasional use you can get a free loaner tool from any auto parts store.

@FerroDuque

10 ай бұрын

Right, but they are all VERY small!

hello can we flush accumulator and compressor ?

@gautorepair

3 жыл бұрын

Under no circumstances can we flush compressors, accumulators, or receiver/ driers.

I made one an it exploded..... had to make it out of steel pipe

I know you said not to flush the condenser, however, on my project the condenser is no longer available. Available. This is an r12 condenser that has much larger tubes and is very free flowing. What are your thoughts?

@gautorepair

11 ай бұрын

There may be older condensers out there that could still be flushed. If it has the thicker tubes, and not a parallel flow condenser then yes you can flush it out with no problem