All 4 of my wife's locks have gone out. Your video has helped me change out both front locks. Appreciate you taking the time to make this video

I have a 2016 Rogue SV coming into the shop for a driver's door replacement. I doubt they have changed much. So this video has helped me immensely! Thank you very much for taking the time and sharing this. Very well done.

@skymotorgarage1806

7 жыл бұрын

Thank you very much

BTW - removing the door panel is necessary for the keyless Intelligent Door Handle. The screw hole trick works only for the base trim model without the keyless entry feature.

You're doing about 90,% more work than necessary. Glad I saw some other videos first

@keithn4304

13 күн бұрын

When he took out the window... I was like... this can't be right. Can anyone link a video that shows the way to replace the handle without disassembling the whole door.

Thanks for a very informative video! I have two bad lock actuators in the front doors. 2009 murano . I can tackle the job myself after watching this video. Thanks agian!

Sweet job thanks for the video I’ve got to do this this weekend

Very helpful video. Thank you!

Thanks for your informative vid, I learnt enough from it to fix my door, specially how to disconnect the lock rod to take out the look. Saved me a lot of headscratching.

Thank you for the informative video. I did mine in about an hour with help from your video.

This is an excellent video.. thanks a million

Great video, thanks so much.

you made it much more easy to replace mine thank you.

Thanks for the video..

Thanks for the information

❤My Humble Gratitude For Your Clear Tut😊

How does the key lock retention screw come out. Mine has a clip on the outside and the lock won’t release

I'm not sure about the intelligent key handle but theres a plastic or rubber cap on the side of the door that let's u take the assembly out in like 3 minutes with put messing with the window

If my Murano doesn't have intelligent door handle and I install an intelligent one, will the smart feature work?

Thanks for the video, but my gosh, that music is annoying! :)

So grateful for this video, wouldn't have tried this without seeing it done. Awesome!

Another piece of information; the set screw usually does not fully come out, it starts slipping half way, you think the screw has been fully backed out, but it has not. So if you try to pull out the lock cylinder block at this point, it won't come out because the screw is still in the block. I got the screw all out by pulling the lock block hard to put some tension on the screw to make the thread to engage again, in the same time continue to turn the screw until it is completely out. After that, the lock block is totally free, and can be pull out easily.

Fantastic video!! When you are finished, does the smart key fob automatically recognize the iKey, or do you have to re-program the key fob somehow? If you do have to re-program the key fob, how do you do that? Thanks!

@skymotorgarage1806

6 жыл бұрын

Sorry for late reply. I had problem of recovering my youtube password. Yes Smart key fob automatically recognizes the new door switch. No need for reprogramming. It is just plug and play.

Also i believe u can just use a clamp with some kind of rubber guard on it to hold the window up instead of having to mess with it. I personally held it up with duct tape then got the glue off with goo be gone and the bolts for the metal door shield on the inside was color coded GOLD for window assembly nothing for door.

Great vid...I noticed that your fog lights were on, without turning the headlights on in another vid, did you manually wire them to function that way?

@skymotorgarage1806

3 жыл бұрын

Hi Romain No, I did not manually wire them. Canada version has running day lights on (fog lights for 2010 Murano). After engine starts and the transmission is shifted into D with E Brake off then the Fog lights will be automatically turn on. Even after gear back into P and applying E brake with engine idling, the fog lights are still on.

Does this work with a 2010 nissan rogue?

@skymotorgarage1806

4 жыл бұрын

If it is intelligent handle, it should be same design as Murano.

How did the switch come off the door.

@skymotorgarage1806

6 жыл бұрын

the video shows: remove the key mechanism first then slide the the door switch handle out of way.

Do you have to disassemble the window?

@skymotorgarage1806

4 жыл бұрын

Yes for this Murano design, windows needs to be removed.

Do you have to take the window out or can you just leave it up?

@skymotorgarage1806

5 жыл бұрын

Yes, the window needs to be removed because the black panel is holding the window.

other video says, you don't need to takeoff the door panel

The door handle switch inside of the door wtf

Remove window omg to hard

What a pain in the asss I want a regular door handle

Remove window seal wtf

Y the gay was music wtf

nissan murano 2009 is the mechanism the same?

@skymotorgarage1806

3 жыл бұрын

yes it should be same 2009-2014