THANK YOU SIR for this new video.. waiting for more . GODBLESS

Thank you sir for this video.

Thanks sir I have a request plz upload a hatlapa air compressor overhauling video

Very helpful sir. Thanks

@Adventure-Story

3 жыл бұрын

Welcome!

@angelcuyno2195

3 жыл бұрын

Have you experienced overhauling alfa laval purifiers sir?

@Adventure-Story

3 жыл бұрын

Yes long time ago nice purifier also!

@angelcuyno2195

3 жыл бұрын

Yeah thats what i had experienced also. But my next vessel has westfalia kind of separator thats why i looked in yt and found your video.

There is a mistake in video. Torque of spindle screw isn't 15 Nm, it's 75. U can check it in manual

@unknownunknown1802

3 жыл бұрын

any way thank u for the video. I've seen a comment about no presence of regulating ring. As i know it must be anyway if separator works as a purifier (not a clarifier) :)

Sir do you have alfa laval purifier makers video like this one? Thank you.. Godblesss

@Adventure-Story

3 жыл бұрын

Sorry currently not any other video of Alfa Laval!

Que bonito vídeo lastima que no este en español

I have an alarm PTL DISCHARGE PRESSURE LOW.ZERO PRESSURE AND COMING OUT TO OVERFLOW THE OIL. NO OPEN THE BOWL NO SOUND NOTHING. ANY SUGGESTIONS?

@Adventure-Story

2 ай бұрын

The best way is to check the bowl and verify if it is ok always start from easy thing check step by step the water supply and such items then go for more complicate one.

POLAR BEAR STYLE

What is the best solution to clean L.O. purifier?

@Adventure-Story

Жыл бұрын

Diesel it is cheap and easy for disposal burns good in the incinerator get good gloves to avoid cuts and touch with the product!

@danut05

Жыл бұрын

@@Adventure-Story thanks

Hello sir, westfalia OSD 35 Purifier not desludging. All O rings changed All holes cleared. Water side strainer checcked for clogging Checked operation of solenoid valves..working satisfactory Still problem persists Kindly help

@Adventure-Story

9 ай бұрын

Check how parameters are set and monitor when the alarm triggers.

Sir where is the gravity disc ? Does these type of separator not have gravity disc

@Adventure-Story

5 жыл бұрын

There is always a gravity disc on separators normaly it is on top of the bowl and have a number on it.

@shivamdutt3086

5 жыл бұрын

@@Adventure-Story sir in this video they never mentioned gravity disc anywhere

@Adventure-Story

5 жыл бұрын

yes you have right it's defferent type of separator.I will check the manual to see!

@shivamdutt3086

5 жыл бұрын

@@Adventure-Story Thank you

@Adventure-Story

5 жыл бұрын

Good day my friend i have check for gravity disk and i didn't find it i have alot of years since i was apprentive to work and maintenance such purifiers if someone can help us but as i see there is fixed design for the specific gravity it is universal setting.In mitsubishi for sure there is a gravity disc and it is replacebale here it is different.

Sir Good day. I have Problem with L.O. purifier valve not opening. Ang PT2 reading error.

@Adventure-Story

Жыл бұрын

Good day check troubleshooting instructions and test the valve to see if it’s operating. Check all related problems with the valve. Pt2 refers to which indication in the monitor is it high back pressure ? Can you specify the alarm because at this moment I don’t have the manual with me. First Check the alarms what it actually says and how it can be related to the problem you get.

I have alarm number 40 ( no water seal) . If you could please give me some suggestions of my problem?

@Adventure-Story

2 жыл бұрын

Check first solenoids and belt condition. Check also the water filter. Also you can compare by reading amp and rpm to see if they are correct.

@hesham272002

2 жыл бұрын

@@Adventure-Story i will trt. First 20 mins purifier is normal after it start give alarm no water seal. Thanks again

@Adventure-Story

2 жыл бұрын

Please reply with your findings!Thanks!

@hesham272002

2 жыл бұрын

I cleaned the filter and was in good condition. Rpm 12000 and the v belts look good. The selonid i tried in manual working. I monitoring during the operation, the selonid is open and i can see the pressure from the panel and the pressure start raise to 3.0 (fees water pressure) and then the purifer give alarm. I wonder why the selonid open during the operation? Suppose only to open in desluge and in the beginning of the operation? I don't know if i am correct or not actually. First time i work on westfaila and in the manual no enough information about the automation.

@Adventure-Story

2 жыл бұрын

@@hesham272002 water supply is necessary during operation there is sequence.Please check also the friction block on the motor sometimes if there is oil present it can slip also you should cleaned them with electro clean most of the times they will stuck.

If I have fuel going into my oil what would I do?

@Adventure-Story

2 жыл бұрын

Where at purifier?

@danielbremner4142

2 жыл бұрын

@@Adventure-Story On a ship. There is fuel in the sightglass on the gearbox mixed in with the oil. I am trying to take it apart. I have pulled the pump off and now am at an impasse. You cannot put a socket down inside the centre to unbolt that center piece.

@danielbremner4142

2 жыл бұрын

It is a WESTFALIA OSE 5-91-037/5 FUEL OIL PURIFIER

@Adventure-Story

2 жыл бұрын

@@danielbremner4142 if fuel get mix with oil means that some o-ring is been damaged. So you would need to lift the bowl to replace it.

@danielbremner4142

2 жыл бұрын

@@Adventure-Story Alright. Just having diffifulty is all.

Please who show me the detailed principle of opening and closing bowl of GEA Westfalia Separator ?

@unknownunknown1802

3 жыл бұрын

kzread.info/dash/bejne/lYFouZRxYpC-nso.html

Que bonito vídeo lastima que no este en español

Que bonito vídeo lastima que no este en español

Que bonito vídeo lastima que no este en español

@hamoabdoabdo3889

3 жыл бұрын

I have 4 machines alva laval oil separator For sale 00201228435703

@Adventure-Story

3 жыл бұрын

How much the price and condition?