I got the same one from goodwill $9 it does the same thing and did the same exactly what you did it worked good as new

I had the exact same issue with my RX-V367, the exact same cap as well. Change it and its all good.

NICE AND SLOW MAKES IT HAPPEN. GOOD JOB

Hi, my RX-V367 started to behave funky when using HDMI inputs and outputs. I got black screens and the receiver would turn off sometimes. I opened it and found the very same cap that was replaced in this video was bulging so I replaced it. Now the receiver seems to be back to normal. Thanks for sharing.

@SomeDisassemblyRequired

8 ай бұрын

Glad to hear that the video helped you out!

Thanks your a life savor… same issue as video works great 🎉

@SomeDisassemblyRequired

Жыл бұрын

Thanks for the feedback, glad I could help. :-)

I’ve changed the 3 PSU caps which showed no bulging but still just getting relay clicking twice, no display. Changed metal film cap on the standby supply. Input voltage to standby power supply is correct. On Off switch functions. Can’t think why transformer would fail. Could be standby board. Enjoyed your video and will persist with repair project. Too good for e-waste

@mickwright7199

Жыл бұрын

By

That’s a common problem with the 2010-2016 Yamahas, it’s always the power supply caps. Once it sees the same problem 3 times in a row, it self protects.

@SomeDisassemblyRequired

Жыл бұрын

Interesting, thanks for the info!

I changed the capacitor for one of 10000 nf and 25v, it turns on and sounds 2 clicks but it does not give output soun

My Yamaha HTR 3065 Receiver Only produce sound from woofer and right front speaker... What's the problem?

I need to connect the bose speakers in the back. How do I do that. Please help me Sir. I live alone and I would appreciate it your guidance

hey man, I tried to connect it to my TV with a decoder but had no sound. TV, decoder and yamaha works fine but sound comes from TV. Connections: TV HDMI 1 ---> YAMAHA HDMI OUT ---> YAMAHA HDMI 1 ---> Decoder and YAMAHA sets on HDMI 1 from the device. Can you please help?

I was repairing that same issue and find out that the main operational processor have bad contacts or is broken inside. Mine totaly destroy the VFD display IC. Sometimes didn't start up at all and so on..

I can't believe you missed that bulged capacitor

Hey I want to do repairing course of this thing any idea

If you've got one with HDMI ARC (looks like this one may not) then you're golden too

I love the kitty scoory. 😺

@SomeDisassemblyRequired

Жыл бұрын

Thanks from us both!

Do you know if you can turn the volume on the receiver up and down via your TV remote? (Hdmi)

@SomeDisassemblyRequired

2 жыл бұрын

Thanks for the suggestion. The unit is currently sitting on the shelf but whenever I get it going again I'll try that.

Exactamente la misma avería que tuvo el mío. 😂

Al cortarse la energia por cualquier causa o se quema la fuente o se dañan los capacitores de poliester...no son muy bien diseñados

Great video! I picked one up and when I go to increase the treble or the bass, it won’t change or it turns the unit off. Any clue what’s happening here?

@SomeDisassemblyRequired

Жыл бұрын

Thanks! Sorry, but that symptom doesn't ring any bells with me. You might try taking the lid off and blowing it clean with an air can, but I don't have much hope that it will fix it - it's just something easy to try.

Hi, I have the same AV and it takes 10min to start the sound. After it starts, it works fine, but do you what is the cause of that?

@matthewk956

Жыл бұрын

Adrian, did you find a fix for this? Mine does the same thing, takes about 10 min for the audio to kick in and then works fine.

@machielbotha4640

Жыл бұрын

@@matthewk956 mine does the same and it seems when the climate is colder it takes longer any advise

@marcusjosefsson4998

10 ай бұрын

​@@machielbotha4640Sound processing chip has bad soldering, when it heats up it connects.

I have one with the exact same issue, but no way I’m going to fix it. If you wanna pay for shipping it’s all yours!

@SomeDisassemblyRequired

2 жыл бұрын

Thanks for the offer but it probably isn't worth even the shipping cost. :-)

@ubxs113

2 жыл бұрын

@@SomeDisassemblyRequired ah well, no worries and thanks!

We bought the same but now how do we use Bluetooth for our headphones? Would appreciate your help. Thanks.

Any body solved the problem for the amp starting up but sound only comes after about 10 min

@marcusjosefsson4998

10 ай бұрын

That's probably bad soldering at the sound processor chip. When warm enough it gets contact and sound works. Solution is either resolder the chip/circuit or using flux and heat gun heating it up enough for the solder to settle properly.

This device support pc. 5.1 rca input

What issues did you work through. That's the MOST important part

@SomeDisassemblyRequired

2 жыл бұрын

That's covered in the video. If you're really curious, that's the way to find out. :-)

It seems that your are a real Pro ... can you help me please!!!??? My Yamaha starts vor just 1 or 2 seconds and than it's over! I have checked the Olks or how it is called and they seem to be ok (visual)! 8..-((

@SomeDisassemblyRequired

2 жыл бұрын

My only idea is that there may be something bad in the power supply, such as one of the capacitors. However, that's purely a guess. If you do poke around inside yours, be sure to avoid contacting the line voltage, which could be dangerous.

Thw cat come with the av

🫥🥱😮‍💨 5:15 minutes later... Wait, 🧐 I think I'm getting action... WE GOT ACTION!!! 🎬 🤷‍♂️🤷‍♂️🤷‍♂️ WHAT'S GOING ON ROGER!!! A lot of videos do not cover every single step from the moment they plug it in to each wire getting put in even if you have to rotate the wires at a certain angle. At approximately 8:35 you reached my exact problem as im having but instead you erased it out of your video, jumped over it and continue it on🤦‍♂️🤦‍♂️🤦‍♂️ Going onto around my 12th video now, Literally!!! I give up. Thanks anyways

@SomeDisassemblyRequired

Жыл бұрын

Glad I could help. ;-)

Nice video, but... Come on... Reuse a 2 bucks capacitor? It cost 2 bucks brand new, I think that the tube of sealant costs 10 times more... I've been using a Yamaha receiver from 2006 every day, they are built to last, it's a shame to use a refurbished capacitor that have some hours of use. As you obviously known that electrolytic capacitors are drying with time and use...

@SomeDisassemblyRequired

2 жыл бұрын

The main idea was to reuse something I had on hand to fix a nearly worthless receiver, not to lovingly restore a vintage hifi piece for future generations. (Reuse is one of the primary ideas of my channel.)

@GlycerinZ

2 жыл бұрын

So when that capacitor fails, he will just.. replace it? Not that hard to do.