In today's lesson, we learn to turn with our ears. Nice piece and a good redesign born of necessity, but I think learning to listen to the wood is a key point. Nicely done, as always.

@ThePapa1947

10 ай бұрын

Thanks Josh. Once things get rounded and get a consistent cut the sound becomes steady. A change in the sound hitting a crack or a knot can stand out. I got lucky with this one but I think it was a combination of a new vibration as well. Thanks for watching, Gary

You don't always get what you want but you get what you need. I appreciate that you over come

@ThePapa1947

10 ай бұрын

Thank you Dana and thanks for watching. Gary

It takes talent to recover from a design change like that. Good job.

@ThePapa1947

8 ай бұрын

Thank you Sean. I was sure happy to save this one and my friend loves it. Take take, Gary

Very innovative means of repairing the crack with the disk. It is nice when we naturally/automatically use our problem solving skills and not just rely on what we have conventionally been shown.

@ThePapa1947

10 ай бұрын

Thank you very much Lee. I think it is always good to first try and figure anything out if you can. That is why I like making jigs and fixtures so much. Take care, Gary

Nice recovery. That is one of those times where one has to make a decision whether something is worth recovery efforts or should be abandoned. You made the right decision for this piece, it looks really nice.

@ThePapa1947

10 ай бұрын

Thank you Mark. This was important to finish as my friend who grew the tree that this came from is going to get the turning. He is having health issues and I really want to get it to him.

I like your fix! Thank you for showing it! The more I turn, the more near disasters happen, accumulated just by volume turned. So having the fixes in the toolkit is really important. Thanks again!

@ThePapa1947

10 ай бұрын

Thank you Stephanie. For sure there are lots of ways to do things and the more you turn the more you will learn. Thanks for watching, Gary

Saved with glue 😊, when i saw the title i thought oh no cherry bark whiplash , i got caught today when sand paper slipped on a winged bowl , lots of blood but sticky tape on hand saved my finger for another day 😂😂😂 , lovely cherry bowl Gary 👏👏👏👏

@ThePapa1947

10 ай бұрын

Ouch Vini sorry about that darn bark. It can reach out and bite. Hope the tape did the job and you back at. Thanks for watching, Gary

Any piece of wood that you can finish without it flying apart or injuring you is a good piece 👌😊

@ThePapa1947

10 ай бұрын

I would agree with that.

That little piece of cherry gave you a lot of trouble But not to much. Anyway great looking finished piece! Thanks Gary for sharing your talent!!

@ThePapa1947

10 ай бұрын

Thank you very much Luie. I was going to call this "A Real 20 Minute Bowl" LOL....well so much for that. Thanks for watching my friend, Gary

Nicely done. Sometimes, projects become processes. 👍👍 Thanks for the video.

@ThePapa1947

10 ай бұрын

So true Jerry! Thanks for watching, Gary

Great save, Gary. Persistence pays off again!

@ThePapa1947

10 ай бұрын

Thank you very much Crystal! Take care, Gary

Nice save, Gary. The slight crack probably wouldn’t have been noticeable to anyone but you but you’re the one who needed to be happy with it. Nice little bowl, my friend. 👏👏👏 Take care, …..Gord

@ThePapa1947

10 ай бұрын

Thanks Gord, just kind of how I am. Was minor but worth the extra work. Thanks for watching, Gary

Great catch on hearing that crack. Most of us don't listen that well to our work.

@ThePapa1947

10 ай бұрын

Thank you very much Jean Long. I think in was a combination of hearing it and feeling a new vibration that had me stop and check. Also it is a good idea to check a recess or a tenon while you are turning. Especially on wood that is not dry because of movement. But this was dry and did not have much strength. Reminds me of how cedar splits so easy. Thanks for watching, Gary

So glad you were able to save the bowl. Very nice work Gary 👍.

@ThePapa1947

10 ай бұрын

Thank you Scott, I was as well. It will go to my friend who gave me the piece as soon as we can see him. Thanks for watching, Gary

Perseverance pays off again. Lovely little bowl.

@ThePapa1947

10 ай бұрын

Thank you Ron I appreciate you watching, Gary

Beautiful little bowl, I think it looks better shorter. You shared a lot of good information in the video, thanks for sharing.

@ThePapa1947

10 ай бұрын

Thanks so much Kent. I also think it looks better a bit shorter. But when you pretty much have to do it the first thought is oh darn. But it all worked out. Thanks for watching, Gary

Phew! Made it! No disaster can thwart you, Gary! The bowl came out beautifully and nobody got hurt. 😊

@ThePapa1947

10 ай бұрын

Thank you Gwynn. Sure was happy I was able to finish it. Now to work out getting it to my friend who grew the tree. Thanks for watching, Gary

I think every piece of wood is a challenge for me , I try not to give up ,but sometimes its firewood ,thanks for your time , Bryan McCabe, aka,woodbutcher

@ThePapa1947

10 ай бұрын

I suppose they all are a challenge for us but some are just one heck of a challenge. Happy turning my friend, Gary

@JamesCouch777

10 ай бұрын

Lol, I can identify with you. I guess it's mostly because I pick the most difficult pieces to start with. Watching Phil Anderson has ruined me 😂.

@ThePapa1947

10 ай бұрын

I eventually get all the pieces on the lathe. Some are easier than the others and I like to give them all a chance. The really difficult ones can be lots of fun.

That is a really pretty bowl and even though you had trouble turning it, it provided a bit of teaching on saving it, well done and thanks! Cheers Al

@ThePapa1947

10 ай бұрын

Thank you Al and Cherry is always nice to turn. It was one of those Oh Shoot moments but I knew I really had to finish it and sure happy it came out ok. Hope I will be able to give it to my friend who grew the tree soon. Thanks for watching, Gary

Great save and a beautiful bowl. I love Cherry wood and have turned a few bowls of it. I liked watching you figure out an alternative plan when the recess broke. I'll add that trick to my turning repertoire. Thanks for sharing!👍🏾

@ThePapa1947

10 ай бұрын

Thank you very much Greg. I was sure happy I could save it and not leave it looking like it had been stitched together. I appreciate you watching and commenting. Happy turning, Gary

Good save & lovely end result Gary. Keep well & stay safe 👍

@ThePapa1947

10 ай бұрын

Thank you Jim and thanks for watching, Gary

Was at least an easy turning angle what benefits. A beautiful bowl is a great reward!

@ThePapa1947

10 ай бұрын

Thanks so much Dianne! Happy you liked it and thanks for watching, Gary

That’s a very pretty bowl. I love the bark still attached. It makes it look much taller. The wood is beautiful. Great job! Bravo!

@ThePapa1947

10 ай бұрын

Thanks so much Cathy. I do like the bark on this one. I just did another piece of Mimosa and was hoping the bark would stay on but it was loose when i picked it up. Thanks for watching, Gary

very nice save. Enjoyed the video. Nice tip on the spacer to fit the recess to continue working the bowl.

@ThePapa1947

10 ай бұрын

Thank you Chris, it just kind of came to be as I had planned on putting a disk in there anyways just to hide the recess. Thanks for watching, Gary

It turned out nice Gary. I'm happy nothing bad happened. Thank you for sharing

@ThePapa1947

10 ай бұрын

Thank you Albert. Yes I am glad it did not fly though the window as I am looking forward to giving it to my friend. Take care, Gary

A good lesson for us on problem solving Gary and a nice end result. Cheers Deno

@ThePapa1947

10 ай бұрын

Thank you Deno. I was sure hoping it would stay together and was very happy when it did. Or I would have had to go to plan B. Thanks for watching, Gary

@denocro3586

10 ай бұрын

Always look forward to your work Gary and very much appreciate you sharing with us.

Great project Gary and Nice save Keep up the good work

@ThePapa1947

10 ай бұрын

Thanks so much Dave! Cheers, Gary

Great improvising! The bowl is lovely. I love live edge pieces and cherry is my favorite!

@ThePapa1947

10 ай бұрын

Thank you very much Susanne I appreciate your watching. Gary

Hum! “Definitely pretty easy” famous last words. I loved your recoup plan though. I’ll have to remember it. Still turned out to be a beautiful cherry bowl as only cherry can do. Loved the natural edge. Great video Gary. Have a Wonderful Week-end!

@ThePapa1947

10 ай бұрын

Thank you very much Claude! Happy you liked the video and a great week end to you as well. Gary

Small, perfect and it turned out the way is was supposed to in the end... I spent most of the video waiting for a massive catch, and was dreading it ... glad it wasn't that bad 👍

@ThePapa1947

10 ай бұрын

Thank you Barry. Happy you liked it and it was a small issue but felt like a disaster at the moment LOL. Thanks for watching, Gary

Things happen, I'm just glad it didn't fly across the shop. It turned out lovely. Cherry never disappoints in color and grain patterns. Have a great weekend, Gary.

@ThePapa1947

10 ай бұрын

Thank you very much Jane. For sure if it would have flown across the shop it would have either broken the window or it would have turned into tooth picks. Cherry is a not a real strong wood but it sure is a pretty wood. Thanks for watching, Gary

Glad you were able to save this one Gary. Your experience with this bowl is why I almost always use a tenon. They are more work to finish the bottom than a recess but they work better IMO holding the wood onto the lathe. Cherry is such beautiful wood and you showed that with this piece!

@ThePapa1947

10 ай бұрын

Thank you Stuart. I would say I use a tenon the majority of the time. I also use hot glued on tenons and almost did that for this piece. But a recess will work fine on most woods. Cherry does not offer a lot of strength though. Take care, Gary

Great little bowl Gary! Im just glad it didn't explode. That crack had me worried. Thx and take care.

@ThePapa1947

10 ай бұрын

Thank you very much. Cherry is not a very strong wood for sure. Thanks for watching, Gary

All in all I think it turned out great Gary . Cute little bowl .

@ThePapa1947

10 ай бұрын

Thank you Jon I appreciate you watching and commenting, Gary

"The best laid plans of mice and men", huh? That was a nice recovery.

@ThePapa1947

10 ай бұрын

So true! Thanks for watching, Gary

The bowl turned out amazingly good! I love it a lot. ❤

@ThePapa1947

10 ай бұрын

Thank you very much Beverly I appreciate you watching and commenting Gary

Wow Gary, if you have to suffer a disaster, may it be only a small one, and recoverable! It is interesting to see how you recovered the piece, thank you for sharing for us all to learn your methods - I love the simplicity of sticking a disc into the recess (and admit that I would not have thought of it!) Not only do you teach us woodturning and practical skills, also creative thinking/ problem solving skills. I learn so much from your videos; thank you, Sir!

@ThePapa1947

10 ай бұрын

Thank you David and I wish I would have shown how easy that was to do. But till I do show it all I did was used double stick tape on a wood tenon in the chuck and place a piece of cherry against it. I then turned that to the right diameter and thickness to fit the recess. Very easy to do. Thanks for watching, Gary

Great save, Gary! That came out really nice!

@ThePapa1947

10 ай бұрын

Thank you Billy. I just need to remember it if happens again. But I forget where I put my truck keys half the time LOL Thanks for watching, Gary

Nice Gary! I had the same experience. I broke the mortise. I glued the broken piece back on. Then I used your idea to hot glue a tenon on the bottom so I could chuck it up again without using the mortise. Thanks for sharing your ideas! They have come in very handy!!!

@ThePapa1947

10 ай бұрын

Thanks so much Tim. There always is a way to fix something. This time it worked out fine with no witness of a repair. Which is my favorite way. Thanks for watching, Gary

Great save on a beautiful bowl!

@ThePapa1947

10 ай бұрын

Thank you Carol, I really am happy I was able to finish it. My plans are to give it to my friend who grew the tree if we get a chance to see him. Thanks for watching, Gary

Looks great I was waiting for that crack to split the whole thing into pieces thank god you got away with only the little mishap with the recess and you were able to fix that because even though I was waiting for things to go completely to pieces I like to see projects turn out and no body having to duck and dive out of the way your bowel turned out great nice job Papa

@ThePapa1947

10 ай бұрын

I could see the crack only going down an inch at the most so that was not a concern. And the fact I was hollowing the inside I was not in the line of fire. I did not expect the recess to crack but that is cherry for you. Not very strong grain and the wood was very dry. I should have done my first thought and that was hot glue a tenon on. And the reason for that and the recess was to keep the bowl as tall as it was. But I think it looks fine a little shorter. One day I took 3 pieces off and tossed them because of cracks. Just not worth it. Thanks for watching, Gary

Nice save Gary. Cherry is definitely one of my favorites...color and grain never disappoint.

@ThePapa1947

10 ай бұрын

Thank you Todd, I appreciate you watching, Gary

Really glad that worked out for you Gary. Bit dicey but nice piece in the end.

@ThePapa1947

10 ай бұрын

Thank you Ron! Take care, Gary

What a beautiful piece Gary. Love how you where able to save it. Thanks for that great lesson.

@ThePapa1947

10 ай бұрын

Thank you Chris, it is always fun when it works out. Happy you enjoyed the video. Gary

Great recovery on the bottom. A nice little piece of cherry and you turned it into a beautiful little bowl. A great work of art sir.Thanks for all the hard work and thanks for sharing it with us.🌿 ☀☀☀☀☀

@ThePapa1947

10 ай бұрын

Thank you very much Rob and thanks for watching, Gary

I'm glad you were able to save it, Gary. Cherry is one wood where I can't trust recesses. I realize your piece was older, as well. The nub design was great & I might need to borrow it. I just got a piece of Mountain Ash ready and mounted for a live edge bowl, when I get in the shop next week. That was a good demonstration of precise turning on an imperfect surface.

@ThePapa1947

10 ай бұрын

Thank you Jay I was happy I was able to save it as it is meant for a gift for my friend who had the tree growing in his yard. My plan all along was to fill the recess like I showed. I just finished another piece of Mimosa and I used a recess on it and filled it with a piece of Cherry. This Cherry recess cracking has not turned me off from recesses. I only use them when I start with a small piece just to keep it from getting smaller. A hot glued on tenon is another option I had thought of and maybe should have done that. Thanks for watching, Gary

Well rescued still a lovely little bowl

@ThePapa1947

10 ай бұрын

Thank you very much Colin! I appreciate you watching and commenting, Gary

Great save on this one Gary and so happy you heard it go before it gave way fully. I actually prefer the shorter end result as well. Great video my friend. Take care Gary. Hwyl, Huw

@ThePapa1947

10 ай бұрын

Thank you Huw, It felt slightly out as well. Glad I was able to save it. It is in our car and will give it to my friend when we see him. Thanks for watching, Gary

Looks good! Really enjoyed how you addressed the problems and your solutions worked out well. Thanks for sharing.

@ThePapa1947

10 ай бұрын

Thank you Karl. I do not look forward to needing to figure out a way to fix something but I do enjoy working out a method. Thanks for watching, Gary

HI GARY that was close u saved it. lol. I also lost my vase 3 times but managed to save it. its always a learning process.

@ThePapa1947

10 ай бұрын

Thank you Manjit. For sure there can be lots of surprises along the way. Take care, Gary

Thank You Gary.... Always FUN for us viewers when there is trouble and requires special dancing around to solve it. This was FUN and with one of my favorite woods Cherry. I am back from a 3-hour hike and ready to take a short nap. I watched earlier and commented BUT for some reason I had to re-fresh my computer for it to go through and I lost what I originally wrote. Until next time Gary.... TM

@ThePapa1947

10 ай бұрын

Thank you TM, sounds like you had a nice hike and a good nap as well. I have to admit fixing the issues was a lot of fun for me. Take care my friend, Gary

That's a beautiful little bowl.

@ThePapa1947

10 ай бұрын

Thanks so much James. Take care my friend, Gary

Great recovery Gary. A very nice bowl.

@ThePapa1947

10 ай бұрын

Thank you very much Jack I appreciate you watching, Gary

Hi Gary... Lovely looking bowl and a great save... Take care my friend...All the best.....Andy

@ThePapa1947

10 ай бұрын

Thanks Andy, I really wanted to save this one so I could give it to my friend who grew the tree. Take care, Gary

great peace, and saved very nicely. Enjoyed it ! Thanks

@ThePapa1947

10 ай бұрын

Thank you Joseph I appreciate you watching and commenting. Gary

"Things don't always turn out the way you want them to." I think I say something similar with EVERY LAST BOWL I MAKE. When I post my bowls to my feed (just for my friends to see) I always detailt he problems I experienced, how I got around them and, of course, point out all the defects. I'm documenting and sharing my learning process. YOU are amazing, always learning, AND amazing. With that said, please keep these words in mind: "The true measure of a system can only be caluclated when critical failures occur." Fine, those are my words, my mantra, but they ring true. You can't tell how good someone is if everything works perfectly. You can only judge their skill when you see how they adjust to adversity. I learned so much from watching you adjust.

@ThePapa1947

10 ай бұрын

Thank you very much Michael and your words ring true. Case in point I served a 5 year apprenticeship to become a wood patternmaker. At the end of that I became a journeyman patternmaker. I was told during that whole time at the end is when you really start learning the trade. That was so true as the owner of the small shop I worked out turned me loose to continue to learn. It got to the point where he was asking my advice on what I saw in a drawing(very complex drawing) that boosted my confidence and I kept on learning till I retired 11 years ago. I strive to learn something new every time I go out in my shop. While working on an upcoming turning I changed a few things on what I was doing for the better. I will share some of that in the video. Thanks for your comment and you have a great outlook on things, Gary

@michaelross8794

10 ай бұрын

NOW I have another video to look forward to!!!

A great little bowl Gary nicely done as always Kind regards From Will 😊

@ThePapa1947

10 ай бұрын

Thank you very much Will, I appreciate your watching, Gary

Stay safe,good job. 👍🌞🐝

@ThePapa1947

10 ай бұрын

Thank you Jim!

It is always refreshing in someone admitting a disaster. It is also great to see a solution being implimented. To recognise and then solve a problem is always a sure sign of a true professional. This is just one reason I look forward to your videos!

@ThePapa1947

10 ай бұрын

Thank you very much Anthony! I did not have all that much work in this but I wanted to finish it and still have it look good. I am looking forward to giving it to my friend who had the tree growing in his yard. If I had left it glued I would have pointed it out but it was sure worth the effort to make the change. Thank you for watching and commenting, Gary

Looks great Gary, beautiful piece!

@ThePapa1947

10 ай бұрын

Thank you very much John. Dropped into your channel and your inlay project sounds nice. Good use for a laser. I have cut out pieces for a Dizzy bowl and also engraved a feature ring on a bowl using my laser. Lots of good uses for it. Heard you mention a shoulder problem. Getting over one myself. Thanks for watching, Gary

Awesome piece great work thanks for sharing

@ThePapa1947

10 ай бұрын

Thank you Shane and thanks for watching, Gary

Lovely bowl. Thought for sure it would be the top that gave you an issue. The one good thing was that the recess gave way early enough that you could put it back on the screw and make a repair. I like the shortened design better anyway. Great work on a lovely bowl.

@ThePapa1947

10 ай бұрын

Thank you Doug and I like it shorter as well. Cherry is not the strongest wood and could even break loose with a tenon. Sure glad I did see it in time. Thanks for watching, Gary

Turned out ok Gary:):) very good Yiannis

@ThePapa1947

10 ай бұрын

Thank you Yiannis, Gary

A beautiful piece my friend ❤️

@ThePapa1947

10 ай бұрын

Thanks so much ian! Take care my friend, Gary

Nice save! Beautiful little bowl! A true craftsman has the capability to change up the design mid-turning and it still comes out looking like that was the original plan! Well done!

@ThePapa1947

10 ай бұрын

Thank you very much Michael. I just could not let this one go to waste. But I suppose I feel that way about all of them. So many times when I am forced to make a change it ends up looking better. Thanks for watching, Gary

Cute little bowl, Gary! I especially like the contrast of the live edge. No one would ever know it had a last-minute design change, unless you tell them…oops, I guess the cat’s out of the bag. Ha-ha! I’m glad you were able to catch it before it was too late. It turned out lovely!

@ThePapa1947

10 ай бұрын

Thank you Marcia, it sure is a pretty little bowl. Hope to see my friend soon so I can give it to him. He is not feeling good with some issues he has had so not sure when but I have it in the car for when we do see him. I can trust you to try and keep that cat in the bag LOL Take care, Gary

I would say you recovered from that very nicely.

@ThePapa1947

10 ай бұрын

Thanks so much Scott I appreciate you watching, Gary

Good fix. Nice result!

@ThePapa1947

10 ай бұрын

Thanks Stuart I appreciate you watching. Gary

Just finished a set of 4 segmented cherry salad bowls for a family member Gary. Was using Coles Jaws to hold the bowl to finish the bottom. On bowl #3, it popped out of the Coles Jaw, bounced up and hit me in the face knocking my face shield off. Luckily no real damage to the bowl but a few small nicks that sanded out easily and no injuries to me other than some embarrassment. I did change the grippers on the jaws and finished without incident. Was an eye opener indeed and it happened so quickly too.

@ThePapa1947

10 ай бұрын

Thanks Robert, I am not real fond of Cole Jaws but use them when needed. Just always have to cut toward the spindle and not sideway. And I leave the tailstock up as long as I can Glad yours worked out and you could save it. Take care, Gary

Design changes can sometimes be good That bowl is perfect.

@ThePapa1947

10 ай бұрын

Thank you Garth. I agree changes can be good . Thanks for watching, Gary

Nice fix and it looks great!

@ThePapa1947

10 ай бұрын

Thank you very much Phil. Take care, Gary

Well done Gary! I’m always interested in how turners save their projects, and that was a great idea. I know what you mean about the glue line. As invisible as it might seem, you will always see it even if no one else does. Cherry always give a nice result. Very beautiful wood!! Cheers, Rick

@ThePapa1947

10 ай бұрын

Thank you Rick and you are right on about the joint. Honestly I even had to look hard to see it. But I knew it was there. Thanks for watching, Gary

So that was a disaster? Disasters on my lathe often require exercising the old air raid drills from my youth in elementary school! Seriously, nice catch on that potentially dangerous situation. And beautiful results! Thank you!

@ThePapa1947

8 ай бұрын

Thank you Papakase. Oh I remember the old drills and getting under the desk at school. Some crazy days. Never would have guessed a few years later I would be diving into fox holes and covering my head. Thanks for watching, Gary

Hi Gary When I saw that crack across the middle I thought that's going to give you problems, shame the bottom broke off but you sorted it as usual. Take care of that shoulder.

@ThePapa1947

10 ай бұрын

Thanks so much Jim. I saw the physical therapist yesterday and he thinks I am doing good. I defiantly am getting more reach now but still not trying to do it overhead. Thanks for watching, Gary

Nice recovery Thanks Tim

@ThePapa1947

10 ай бұрын

Thank you Tim! Take care, Gary

Nice save Gary. Too bad you lost a little of the beautiful Cherry wood, but it still looks great. Interesting way to chuck it up to fix the damage. Another tool for me to try...thanks for the teaching moment.

@ThePapa1947

10 ай бұрын

Thank you Gil. I think it looks better shorter and most everyone else seems to think the same. So it all worked out. Thanks for watching, Gary

Fantastic work!

@ThePapa1947

10 ай бұрын

Thank you very much William I appreciate you watching, Gary

Great audible and successful move.

@ThePapa1947

10 ай бұрын

Thank you Steve and thanks for watching, Gary

Cute little bowl

@ThePapa1947

10 ай бұрын

Thank you very much grambear8 I appreciate you watching. Gary

Привет, Гарри! Спасибо за твои подробные и поучительные видео. Здоровья тебе и успехов. Привет из России.

@ThePapa1947

10 ай бұрын

Большое спасибо, мой друг. Я ценю, что вы смотрите и находите время, чтобы прокомментировать. Заботиться, Гэри

Gorgeous 😮

@ThePapa1947

10 ай бұрын

Thanks so much Debbie! Take care, Gary

Good job, Gary - you found that cute, little bowl hiding inside that piece of cherry. Regardless of what you were thinking before spinning the wood, the end result is all that matters and this end result looks fabulous.

@ThePapa1947

10 ай бұрын

Thank you very much Qapla! I am liking turning these little bowls. I just might have another one coming😉 Take care, Gary

nice save its best to be fluid when working wood

@ThePapa1947

10 ай бұрын

For sure Chris you just need to go with the flow.

Your bowl is very beautiful. Nice save!

@ThePapa1947

10 ай бұрын

Thank you very much! I appreciate you watching and commenting. Gary

Beautiful live edge cherry bowl, Gary. You dealt with the challenges and it worked out. 👏👍🤠

@ThePapa1947

10 ай бұрын

Thanks so much Rob I appreciate you watching and commenting, Gary

Great save!

@ThePapa1947

10 ай бұрын

Thanks so much and thanks for watching, Gary

quite nice. worth all your effort.

@ThePapa1947

10 ай бұрын

Thank you Jim. I really wanted this one to turn out nice and I think it is not bad. Plan on giving to my friend who grew the tree the next time I see him. Thanks for watching, Gary

Very nicely done Gary. At this point I have a lot of confidence in your abilities to avoid disaster. A very nice bowl, and the live edge is really pretty. Keep up the good work!

@ThePapa1947

10 ай бұрын

Thanks so much Mark. I was very happy I was able to save it. Thanks for watching, Gary

That came out really sweet! I was so nervous that it was going to crack completely and fly out in the room. So happy it didn’t. And happy for you to have another beautiful piece in your collection 🤗

@ThePapa1947

10 ай бұрын

Thank you very much. Yes I am sure happy I was able to complete it as it will be going to my friend the next time we see him. Thanks for watching, Gary

I prefer it being shorter. Thank you for sharing.

@ThePapa1947

10 ай бұрын

Thank you Herbie. It was like it was meant to be because I like it shorter as well. Take care, Gary

I was on pins and needles waiting for something to explode, so I'm glad nothing like that happened. Last time this happened to me I just threw the bowl away thinking it wasn't worth the time. I love that you stayed with it and came out with a nice piece.

@ThePapa1947

10 ай бұрын

Thank you Jeff. I made sure the gouge was extra sharp before finishing it and it held together nicely. I was sure happy about that. Thanks for watching, Gary

@bobhoffman8717

10 ай бұрын

Nice, I have had some bowls come flying off. Not fun. Sometimes I just make a different bowl then what I started with.y neighbor will come over and ask what I,m making. I just tell him, I don't know, I'll let you know when it's finished.😅

Beautiful.

@ThePapa1947

10 ай бұрын

Thank you Kam I appreciate you watching and commenting Gary

Good save with this one Gary. Came out looking really nice. Have had many design changes myself since i started, some of them quite severe. So far i have only ever had one that didn't make it and that was because of bad resin mixing. the resin stayed tacky and would bleed out. As always thanks for sharing cheers Bruce

@ThePapa1947

10 ай бұрын

Thank you very much Bruce. I have no experience with resin and wood turning but I have more experience with resins than I care to think of. We used at work to make core boxes for the wood patterns we made. It was some pretty nasty stuff so I stay away from it. I had a bad experience with resin because I let an apprentice mix some stuff up for me. Oh and another one about smoked us out with a bad mixture. Thanks for watching, Gary

It looks good. I really like the way the lab edge on items look. Thank you for not editing out the broken recess. I appreciate when problems are shown and ways to fix them. I’m sorry your shoulder is still bothering you, but thank you for continuing to share your artistry.

@ThePapa1947

10 ай бұрын

Thank you very much Lynda. I have not had many recess break and think was glad I could show how I planned on fixing it. I had another physical therapy session yesterday and things are going good. Not going to see him for month and maybe not if things keep getting better. But still not supposed to do real heavy things or reach above my head. And I have some wood I need to get back up on the shelves. Thanks for watching, Gary

@lyndaowen2154

10 ай бұрын

@@ThePapa1947 I will put you in my prayers for a quick and complete healing for your shoulders. I appreciate your videos for the beauty of your artistry, but also for what I learned as I am trying to learn my lathe. I am learning I actually finished two small bones about 4 inches in diameter and 2 1/2 inches tall. If I knew how to send pictures I would. Just get well soon.

Nice job.

@ThePapa1947

10 ай бұрын

Thanks so much I appreciate you watching and commenting, Gar

Gary, great job mate shame about the recess but still looks smashing well done

@ThePapa1947

10 ай бұрын

Thanks Alan! As it turned out I think it looks better shorter. Thanks for watching, Gary

Gary, very ice looking bowl. I like the inclusion of the bark, it really adds to the piece. Too bad about the separation and having to shorten the height. As usual your recovery was spot on. Also like the finish!👍

@ThePapa1947

10 ай бұрын

Thank you Skip. I think the shorter version looks better. That is my story and I am sticking with it LOL Thanks for watching, Gary

Great project Gary! And never would be bored with your content. I tell Phil those types of bowls are made for M&Ms. 😊

@ThePapa1947

10 ай бұрын

Thank you Laura, for sure they are perfect for M&M's. Or maybe some spicy almonds.] Thanks for watching, Gary

nice save!

@ThePapa1947

10 ай бұрын

Thank you Pat and thanks for watching, Gary

Very nice.

@ThePapa1947

10 ай бұрын

Thanks Mark I appreciate you watching, Gary