If you like this video or have any doubt about a restoration process, do not hesitate to leave a comment and give a "like".

@phoenixfox9713

2 жыл бұрын

instaBlaster

It is such a pleasure to see even these "lower tier" vintage road bikes get TLC such as this. It is a nightmare going into bike shops and seeing the fat tire schlock they have on sale! It's even creepier trying to get replacement parts for a rebuild. Thanks!

@dabrestauracion7404

3 жыл бұрын

Estoy contigo amigo !!! Menos mal que por suerte tenemos internet. Un saludo y gracias por comentar ; )

I appreciate you for doing this. This video alone makes me want to buy a vintage road bike just to disassemble it and assembling it again.

@dabrestauracion7404

4 жыл бұрын

Thanks a lot friend !!! That's what it's about and also to help you in everything I can in your restorations. Greetings; )

There is the video I have been looking for! Thank you! This is a great instructional on taking apart and servicing/restoring a classic bike. Still, a list of tools and where to get them would be very, very helpful. You have no idea how helpful your videos are! Thanks! Ps. I had a junior racer in the 1960s with one chain ring in the front and the same three cogs Simplex drive train. Not this make, but undoubtedly the same drive train. Brings back memories 😊

@dabrestauracion7404

2 жыл бұрын

Hello again my friend!!! Well, I will try to put the parts and tools that I use, even though they are not new tools, it takes time to find tools that may be worthwhile and recommending something that I have not used is complicated. Thank you for your comment and for leaving me a nostalgic message. It's what I like the most ; )

@larsfrandsen2501

2 жыл бұрын

@@dabrestauracion7404 I think I have found a good starting point: Park Tool PK5. A good set. Not cheap, but this tool set will cover most restoration and repair scenarios. I post this for others, who might have the same question. I thank you for all your time and interest in responding to my enquiries. Thank you!

@dabrestauracion7404

2 жыл бұрын

@@larsfrandsen2501 hello again friend!!! I have to respond to the comment you left me on facebook. Using park tools is always the best option ; )

Thank you for another amazing video. Your collection of traditional bike tools is almost as impressive as your bike builds.

@dabrestauracion7404

4 жыл бұрын

You are absolutely right, I was very lucky to be able to buy all these tools from a workshop that closed in 1995, thanks for leaving your comment; )

@biketrybe7071

4 жыл бұрын

@@dabrestauracion7404 I am pleased that you were able to buy those tools so that you can continue to rebuild classic retro bikes. Keep up the great work.

Thank you for your work. Very inspirational! I love how you were able to keep the original paint.

@dabrestauracion7404

3 жыл бұрын

Thank you friend !!! I am very happy for your comment, whenever possible the original painting must be respected. Greetings and thanks really ; )

Great video! Step by step tutorial. Thank you!!!

Bikes are for ever. Thank you.

Hermoso proyecto de restauración. Cuánta historia debe haber sobre las ruedas de esa BH! Saludos desde Chile, maestrísimo! P.S: Espero ansioso el desenlace de la Colnago 👀

@axeldominguez9551

4 жыл бұрын

X2

@dabrestauracion7404

4 жыл бұрын

Hola amigo!!! Muchísimas gracias. Respecto a la colnago estoy esperando que me traigan los adhesivos , yo también tengo muchas ganas de iniciar ese proyecto jejej un saludo amigo y gracias por comentar🙌🙌👍💪

Once again you outdid yourself, excellent job, y como decimos aquí en Ciudad Juárez, México, TE VOLASTE LA BARDA CARNAL!!!

In love with your job. Thanks for sharing!!!!

@dabrestauracion7404

4 жыл бұрын

gracias a ti por verlo !!! ¡¡¡feliz Navidad!!! ; )

The tools you have, wow!

I love it! good job as always thank you for making them come alive again.

@dabrestauracion7404

4 жыл бұрын

Thanks a lot friend !!! It is a pleasure to read comments like yours, a greeting and strength in these days of confinement ; )

Thank you for sharing this Everything was beautiful God bless you and your work

@dabrestauracion7404

4 жыл бұрын

Thanks friend!!! I am very glad your comment, really thank you for commenting, greetings ; )

Esto es una arte. Increíble talento y paciencia. Quiero aprender armar una bicicleta con mis propias manos pero hace falta un maestro como tu.

@dabrestauracion7404

4 жыл бұрын

😍😍😍 vente a España y te enseño lo que se, un saludo amigoo gracias por tu comentario me hace muy feliz amigo ; )

@junboo8730

4 жыл бұрын

dab restauración Fui a España de visita y me fascino. Aprendí muchas cosas de su cultura que heredamos en la nuestra. Su comida y estilo de vida me encantó. Tanto así que comencé a buscar información para trabajar allá. Así que te acepto tu palabra de enseñanza cuando logre conseguir el empleo. Podría estar aquí escribiendo un día. Hasta un Starbucks con la bandera de Puerto Rico tenían?;). Viva España y su gente.

@dabrestauracion7404

4 жыл бұрын

@@junboo8730 jajjaj, pues cuando espero que tengas suerte y encuentres trabajo por aquí, yo aquí te espero y muchas gracias por tu comentario ,un abrazo muy grande amigo ; )

@junboo8730

4 жыл бұрын

dab restauración Si, ahora es cuestión de esperar. De visita vuelvo y no es broma. España me llama. Un gran abrazo y gracias por tan espectacular trabajo.

@dabrestauracion7404

4 жыл бұрын

@@junboo8730 gracias a tii!!! Un saludo amigo ; )

Sin palabras, trabajazo tanto en la bici como en el vídeo, muchas gracias David 😍

@dabrestauracion7404

4 жыл бұрын

Gracias a ti maquinón!!! ; )

The images of the bike, music, your work with tools - all is in harmony and perfect balance. Its a beautifully shot movie, not just a youtube video! Perfect!!

@dabrestauracion7404

4 жыл бұрын

😍😍😍

superb work, as usual

@dabrestauracion7404

4 жыл бұрын

😍😍😍

Buenos días, Como le he comentado en otros vídeos, impresionante el trabajo realizado. Siguiendo tus vídeos he restaurado mi Bianchi sprint de los 70. PD: estás bicicletas pesaran más que las actuales, pero eran bicicletas de batalla, para durar toda la vida, y la sensaciones de rodar en una bicicleta de acero bien cuidada son increíbles (salvo en la frenada que tienes que estar agarrado a la parte baja del manillar si o si 😂) Un cordial saludo y sigue así!

Wow, great job and a really beautiful video. I enjoyed it very much, thank you for making it & posting it.

super cool you didn't change the hub and bb..

Perfect work, take me to my school time. very adorable.

@dabrestauracion7404

4 жыл бұрын

Thanks friend!!!! I'm glad you like it. A greeting and strength in these days that we are passing ; )

Your work it's just amazing...

@dabrestauracion7404

3 жыл бұрын

Thanks friend!!! ; )

Muy buenos los videos, todo el proceso muy detallado y claro, además de una edición de video excelente y muy relajante de ver

Muy buena restauración!!! Ya no puedo esperar a ver la próxima 👏👏👏👏

@dabrestauracion7404

4 жыл бұрын

😍😍😍muchísimas gracias por tu comentario, me hace muy feliz, estoy trabajando duro para dar lo mejor en los videos y que disfrutéis viendolos, un saludo y gracias por apoyarme🙌🙌🙌👍💪

Si señor, muy curioso y aseado montaje. 👏👏👏👏👏

Excellent video! Luv vintage bikes, they will live on past the new machines!

@dabrestauracion7404

4 жыл бұрын

thanks friend!!! Long live the classic bike !!! ; )

Steel bikes are made for ever💪💪 Thank you so much for this lovely video 👍 I just like steel bike, they are simple, robuste, functionable and lovely

@dabrestauracion7404

4 жыл бұрын

The best thing about steel is that it is 100% recyclable. Greetings friend and thanks for commenting ; )

Awesome restoration video

@dabrestauracion7404

3 жыл бұрын

Thanks friend ; )

I am in love with these videos ✌️😎 awesome

@dabrestauracion7404

4 жыл бұрын

Ohhh !!!! Thank you very much, I'm very glad you like it !!! A greeting and strength in these times that run ; )

siempre me han gustado las bicicletas clasicas pero en los modelos altos apenas llego a los pedales XD,buen video tu trabajo es increible

Very beautiful job!!perfect result

@dabrestauracion7404

4 жыл бұрын

many thanks!!! I'm glad you like it and thanks for your comment. ; )

Que gozada de vídeo. Me ha encantado, me ha relajado y me ha motivado. Enhorabuena por el buen trabajo tanto de la bici como del video.

@dabrestauracion7404

4 жыл бұрын

Muchas gracias Enrique por tu comentario, se agradece mucho, un saludo y a pasar unos buenos días en estos tiempos que corren ; )

Amazing just amazing 👌

@dabrestauracion7404

3 жыл бұрын

Thanks friend!!! ; )

Te ha quedado preciosa, no me importaría en absoluto que fuera mi bici diaria para ir a currar. Excelente trabajo

@dabrestauracion7404

4 жыл бұрын

De nuevo te doy las gracias, me alegro mucho ver otro comentario tuyo y que te guste, un saludo y mil gracias ; )

Bravo, my friend! Bravo!

@dabrestauracion7404

4 жыл бұрын

😍😍😍

Hello! This is a wonderful and sincere video! Just a class!

@dabrestauracion7404

4 жыл бұрын

Thanks friend!!! "A picture is worth a thousand words". Thanks for your comment ; )

We waste so so much in the world, I want to believe that the restoration of all things is this pleasing to witness.

Quedo súper bonita 👍🏼

@dabrestauracion7404

3 жыл бұрын

Muchas gracias amigo!!! Me alegra tanto tu comentario. Un saludo ; )

Gracias responder la verdad es muy bonito saber que hay tantas personas en este mundo que amamos este deporte del ciclismo hoy sali a rodar 40kms con un aire que pegaba muy fuerte pero no me iso rendirme saludos Y GRACIAS X RESPONDER 🤗🤗🤗🤗🤗

@dabrestauracion7404

4 жыл бұрын

Gracias a ti!!! a mi me pillo la lluvia, menos mal que ya estaba dentro de la ciudad, por lo menos me respeto la salido heheh . Un saludo amigo y a seguir dándole al pedal!!!! ; )

Impresionante. Gracias por compartir y que buen trabajo! saludos desde Argentina

@dabrestauracion7404

4 жыл бұрын

Gracias a ti por comentar!!! es un placer para mi leer comentarios como el tuyo. un saludo y fuerza Argentina ; )

Just beautiful...😍 A really good job 👏👏👏 Greetings from Chile 🇨🇱

@dabrestauracion7404

4 жыл бұрын

Gracias amigo ; )

such perfectly detailed videos, great work !

@dabrestauracion7404

4 жыл бұрын

Thanks a lot friend !!!! It is a pleasure to read your comments. Greetings ; )

@gstone1345

4 жыл бұрын

dab restauración your welcome, I have a vintage Italian F-Moser frame I’m restoring, your videos are a great help .. thanks again

@dabrestauracion7404

4 жыл бұрын

@@gstone1345 I am very happy that my videos help you, I do them for that reason and also to be able to help in whatever I can. Greetings and thanks again for your comments. for anything here I am; )

Sos TODO un artista muy lindo video me motiva a restaurar genio saludos y exitos desde argetina 😊

@dabrestauracion7404

4 жыл бұрын

Muchísimas gracias compañero!!! me alegra saber que estos vídeos, te sirven de motivación, un saludo desde España ; )

Hola crack.. tremendo laburo como siempre.. hermosa bike..ya estoy por terminar la mía.. saludos desde Argentina 🤙

@dabrestauracion7404

4 жыл бұрын

Animo!!! mandame alguna foto cuando la acabes, un saludo amigo ; )

Good work m8

@dabrestauracion7404

4 жыл бұрын

😍😍😍😍

Excelente dab

1 x chainset. Fat tyres... Plus ca change etc (Love that chainset pulling tool too.)

Me parece que al ver el video, más de uno se va a pedir una para Reyes. Genial!!!! 😁😉ll

@dabrestauracion7404

4 жыл бұрын

jajjaja grande paco!!! nos vemos pronto cuñaooo!!!

Madre mía que trabajo le dedicas no sólo a la restauración que se te da de maravilla, la ediciones fantástica, hace mucho tiempo que restaure una Orbea de varillas y me quedó bastante bien. Y me dije que nunca más haría este laborioso trabajo... Pero me enamoré de una Raleigh queme estada do quebraderos de cabeza... Podrías ayudarme?

@dabrestauracion7404

4 жыл бұрын

Hola amigo, pues para eso estamos, mándame mensajes a facebook o instagram y te ayudare ne todo lo que pueda. Un saludo y gracias de verdad por dejar tu comentario, me hace muy feliz ; )

Muy guapo el video. Parece sencillo cuando lo ves, pero habría que poner otro vídeo con los contras... La tija de sillín soldada al cuadro, los pedales que salen girando con la fuerza de un camión, los tornillos que salen solo con la radial, la potencia amarrada al tubo de la horquilla ;) Good Job!

@dabrestauracion7404

4 жыл бұрын

Tienes toda la razón, es una buen consejo, me lo apuntó para los próximos videos, te lo agradezco, un saludo amigo ; )

top my friend

@dabrestauracion7404

3 жыл бұрын

Thanks my friend!!! ; )

you put a lot of work in this video! Very calming... makes me want to work on my bikes even more... :) Also not a big fan of the vignette on the video makes the video feel a bit claustrophobic... Apart from that, SUPER WORK! Keep going!!!

@dabrestauracion7404

4 жыл бұрын

thank you very much!!! I have to work on the bullet point, little by little I am learning more and I hope that each time the videso are better, to offer you the best of me, greetings and thanks for your commentary; )

Vos vélos et vous. Glorieux.

@dabrestauracion7404

4 жыл бұрын

Merci vraiment, cordialement mon ami; )

😍😍😍

Impresionantes tus trabajos, y los videos en si mismos son una obra de arte!!! Una pregunta, ¿cuanto tiempo puede llevar una limpieza de este estilo, de principio a fin? Voy a ver si poco a poco voy lavando la cara a mi Peugeot de los 80.

Thank you so much for your videos! I am about to start my mother's first bike from the '70s and watching this has made me excited to do so. How do you know which components to reuse and which ones to replace?

Need to do this to my '86 Trek Elance

@dabrestauracion7404

3 жыл бұрын

Hello Friend!!!Cheer up, by the way, your beautiful bike.A greeting ; )

Do you happen to have a contact person that does bicycle decals ....????????? Magnifico,,,, great job....

I have a Raleigh Olympian 575 sl with the original rims. Is it possible to put meatier/bigger tires on it. I want to use it for my daily commute. And also most of the springs on the bike are worn, how do you give them life again?

¡Excepcional atención al detalle! En el transcurso de un año le hice casi todo esto a mi bicicleta de la infancia, con ayuda de vídeos como los tuyos. Sin duda se encuentra calma en estos trabajos. Pregunta: ¿sabes de algún marco de acero, que continúe en producción, con aspecto 'a la antigua', como éste, y con un precio civilizado? Gracias de antemano :-)

@dabrestauracion7404

4 жыл бұрын

Hola Carlos!!! Muchas gracias por dejar tu comentario, me alegro que mis vídeos te ayuden a restaurar viejas reliquias. No se de donde seras, si eres de España lo tienes fácil, en el mercado se segunda mano, el plataformas(milanuncios, segundamano, wallapop,...) estos cuadros no valen mucho dinero, los puedes encontrar desde 30 € a hasta lo que quieras gastarte, depende de las marcas. Este precisamente es de cadete, así que los puedes encontrar incluso mas baratos. Un saludo espero haberte sacado de dudas.; )

i want to have a bike like this

Me encantan tus restauraciones. Una pregunta, ¿qué utilizas para quitar el óxido de los cromados? Gracias.

@dabrestauracion7404

4 жыл бұрын

Hola enrique, esta todo en la descripción del vídeo, bajo del todo lo pone en castellano. Pero puedo decirte que para pulidos, si no estan muy mal con pulimento universal y scootbrite fino , no el de cocina, se queda bastante bien, espero haberte ayudado y si no es así, dime con que parte tienes duda, un saludo ; )

Impresionante trabajo. Donde se puede conseguir las pegatinas? Tengo una igual. Pero las pegatinas estas dañadas. Un saludo

@dabrestauracion7404

2 жыл бұрын

Hola amigo!!! Yo se las compra a un muchacho por instagram, te dejo el link de su pagina, mandale un mensaje y te contestara sin problemas. Un saludo instagram.com/pacobmx80/?hl=es

I got that bottom bracket cable guide bolt stripped what can I do I’m repainting mine and can’t remove it

Nice job as always:) What do you use to polish the wheel rims? The came up great

@dabrestauracion7404

4 жыл бұрын

Thanks a lot friend !!! I use the universal polish and I give it with steel wire wool, I leave you the link of what it is. A greeting and thanks for comment ; )

@dabrestauracion7404

4 жыл бұрын

www.amazon.es/zhongjiany-Alambre-Eliminar-irritaci%C3%B3n-Limpieza/dp/B07QF7MZRJ/ref=asc_df_B07QF7MZRJ/?tag=googshopes-21&linkCode=df0&hvadid=389162059186&hvpos=1o1&hvnetw=g&hvrand=4918803577934825171&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1005404&hvtargid=pla-832305966379&psc=1

nice video !. can you tell me which attachment you use for the angle grinder? . Is that a sanding attachment? What is the grain size of the sandpaper for the attachment? br from Germany

@dabrestauracion7404

3 жыл бұрын

Hello friend !!! It is an abrasive disc of the Soldufer brand in Spain, the disc is used for fine sanding and after passing the cloth disc, with universal pink fine polishing paste. It is used for stainless steel finishes. . I don't really know what grain it is. You can see all the products that he used in this video in its description. Greetings from Spain, I hope I have helped you with your question ; )

Me ha encantado David!!! Una pregunta: qué cubierta has usado para esta bicicleta?

@dabrestauracion7404

3 жыл бұрын

Hola Pablo!!! Pues ahora mismo no sabría decirte, por que ya hace mucho tiempo que hice esta bicicleta, creo que la marca era tmk. Pero no te lo digo cierto. Espero que sea esa marca.Un saludo amigo ; )

magnificent work may I know what you ve used for polishing? What kind of disc and which gradiation?

@dabrestauracion7404

3 жыл бұрын

Hello J C !!! Well, it's all in the video description, anyway I'll write it again: The products that have been used in the video are the following: *Cleaning: -Degreaser (KH7 brand). -Water and soap (universal). -Sponge. -Cleaning solvent, for bearings. *Polish: - Polishing sponge (cindis brand) -polishing machine (makita SA5040C) -Universal polishing (cindis brand) -NPR abrasive disc (soldufer brand) - Universal polishing cloth disc. - Pink universal fine polishing paste. Regards and thanks for your comment ; )

@jc438

3 жыл бұрын

@@dabrestauracion7404 Thanks, sorry for unnoticing description :) I have some polishing to do on my '92 cranks and stem, so I'm considering some options. I think i'll just try doing this manually using sandpaper, 150 for scratches then 400 800 1000, next 1500 2000 on wet, and polishing paste at the end. I will be some fun, but Alzheimer's is no joke, gotta protect myself. Pozdrawiam z Polski!

Will you restore an old cannondale caad in the future...would love to see one ;)

@axeldominguez9551

4 жыл бұрын

Can it be my Cannondale CAAD? :)

@dabrestauracion7404

4 жыл бұрын

If any customer brings me, I will be happy to restore it; )

Estoy enganchado a tus videos son muy buenos, son bicis de segunda mano que compras y vendes o son de clientes que te piden la restauración?

@dabrestauracion7404

4 жыл бұрын

buenos días Maurizio!!! Pues hay de todo, pero la mayoría son de clientes que me las traen para que las repare, esta por ejemplo era de un cliente. Que sepas que me alegra mucho tu comentario. Que pases una buen final de año!!! y al año que viene habrá más DAB RESTAURACION!! Un saludo ; )

@marchioritoDenzill

4 жыл бұрын

@@dabrestauracion7404 gracias por la respuesta :) me he animado a restaurar una bici que compré hace un tiempo

@dabrestauracion7404

4 жыл бұрын

@@marchioritoDenzill me alegro mucho, si tienes alguna duda enviame un mensaje a facebook o instagram, te ayudare en lo que pueda, un saludo y un prospero año nuevo amigo ; )

Good job... I want to buy a bicycle after it is repaired but I don't know how. From indonesia

@rodionpavlenko4680

4 жыл бұрын

If you are in EU: steel-vintage.com

@rodionpavlenko4680

4 жыл бұрын

They can ship it to Indonesia too i guess :)

where is that beautiful place you live on ?

What kind of tires did you use? And thank you 😁

@dabrestauracion7404

4 жыл бұрын

Hello friend !!! They are 600x28 c tires, from the tkm brand, they are quite cheap, the client brought them to me, a greeting and thanks again for commenting ; )

Great work! Where did you get the stickers/ decals though??

@dabrestauracion7404

3 жыл бұрын

You are looking for a special one. I tell you because depending on what you are looking for, I tell you the website. a greeting ; )

@Armin_27

3 жыл бұрын

@dab restauración Cool! Well I'm looking for black Decals of my Surly Pacer 2010 Steelbike, but couldn't find any available. So i went with decals of the Surly Cross-check instead, which is the closest i could get.

Very nice! What year was this bike from? Looks like 1960's.

@dabrestauracion7404

4 жыл бұрын

thanks friend!! Well, this bike is from the late 80's, thanks for commenting, it's a pleasure to read your comments; )

🥰🥰🥰🥰🥰🥰🥰

@dabrestauracion7404

4 жыл бұрын

Muchas gracias brother!!! que te aparecido los planos del dron jejej

@albertotomas8165

4 жыл бұрын

@@dabrestauracion7404sin palabras....solo te digo ♥️♥️♥️♥️♥️ ahora la calidad no solo está en las bicicletas....🙂😘

Hola buenas, donde puedo conseguir unas bielas para una orbea 89? Gracias

@dabrestauracion7404

4 жыл бұрын

Hola Leandro, yo cuando busco piezas sueltas, suelo buscar el wallapop o en rastros, encuentras algo seguro. Espero que te haya sido de ayuda. Si no mándame una foto a mi facebook de las bielas que necesitas ; )

@leandro23_

4 жыл бұрын

@@dabrestauracion7404 Gracias

Cables are in the way a bit ?

@dabrestauracion7404

4 жыл бұрын

Hello Friend!!! The cables are placed, the way it used to be, I have even seen them out there longer than these hehehe Greetings ; )

@mrcockslut6719

4 жыл бұрын

dab restauración oh fair play, love your restorations man. It would be good to see a video about the tools you use, maybe with links where to get them. ( you would get those link dollars too).

Why not the spokes too?

@dabrestauracion7404

4 жыл бұрын

Hello friend, the spokes were also polished, the only thing that does not film them, just like the wheel balancing, sometimes I miss details, sorry, thanks for commenting; )

@chaichokpang5754

4 жыл бұрын

dab restauración I see...thanks for your information I enjoy watching your video 👍👍👍

3:37 That was one weird crank puller

Donde has comprado las pegatinas?

@dabrestauracion7404

4 жыл бұрын

Hola, se las compre a este muchacho por instagram, puedes hablar con el y te podrá ayudar en lo que necesites, te dejo el link bajo, un saludo y gracias por comentar

@dabrestauracion7404

4 жыл бұрын

instagram.com/pacobmx80/?hl=es

@davivi0275

4 жыл бұрын

Un saludo, gracias

@davivi0275

4 жыл бұрын

Y como va eso? Te lo manda por correo...?

@davivi0275

4 жыл бұрын

O como va?

Never seen crank spider "sledge hammered" on like that before , surely your damaging the bearings on the adjustable cup side !?. I would not you anywhere near any bike of mine ! having said that i ride a rare 1987 BH Campagnolo, lovely comfortable vintage bike.

@dabrestauracion7404

3 жыл бұрын

Hello friend !!! That will be because you have never removed some original BH cranks like these !!! I understand that people who are not used to disassembling this type of bicycle, do not know how they work. It has nothing to do with campagnolo cranks, which are extremely easy to remove. Greetings and I hope you understand what you see before judging ; )

@jezztech

3 жыл бұрын

@@dabrestauracion7404 Over the years i have fitted/ serviced Cranks and bottom brackets from Campagnolo, Zues (same) Shimano , Sugino, Stronglight,Mavic, Suntour, Sakae Ringae. Dia Compe. ET AL, the practice was /is to screw the bolts down, then after a short period say 50 miles check to see if they tighten again , experience tells you when to stop. your crank is a bog standard design 3 piece chain set , You just dont hammer them in like that. you have probably done more harm than good. BUT, if there is a genuine reason for such a crude amateur looking method of reassembly then please state why. PLEASE STATE WHY. Also do dodge the question by alluding to disassembly whist its perfectly obvious I am talking about re-assembly using a metal hammer to bash the spider onto the bottom bracket axle.

@dabrestauracion7404

3 жыл бұрын

@@jezztech Hi, friend!!! Sorry if my comment made you feel bad. I have never alluded to a comment, if you notice I respond to all. Now I'm going to tell you why they are assembled in this rough way. This is how the installation is carried out, because this type of cranks when you place them on the bottom bracket, the gap between them is very tight and there is a very large distance and the screw does not thread, for this reason the blows occur With the rubber hammer, (which does not damage the cranks since they are made of iron and not aluminum) to be able to align them, since if you do not do it the screw will not arrive and if you try to do it it tends to over-thread. I can assure you that if it were another type of cranks, I would never dream of doing this. I'm sorry if my previous comment was offensive, but you were the first to be offensive by saying that you would never bring me a bike. I live living and learning every day, I am neither perfect nor do I want to be. You can be a constructive critic and I love that. But be offensive not please. Greetings and apologies if in my previous comment I did not give you the necessary explanation, so that you understand why this installation. All the best ; )

@jezztech

3 жыл бұрын

@@dabrestauracion7404 ok well you explained.

Ottimo lavoro , ma il grasso con il dito ........... Anche no

@dabrestauracion7404

4 жыл бұрын

Ciao amico!!! Devo prendere la pistola per ingrassare dello sgabello. Lo ordino già !!! Grazie per il tuo commento ; )

@ste77ful

4 жыл бұрын

Basta una normale siringa in farmacia , costa meno e funziona benissimo 🚴💨💨💨

@dabrestauracion7404

4 жыл бұрын

La verità è che se. Comprerò una siringa dalla farmacia e comprerò anche lo sgabello. Ho due tipi di grassi e non è nemmeno un grosso sacco. Grazie amico ; )

The bloke doing this work is no mechanic, he is what we would call a bodger, if it doesn’t fit give it a good clout with a hammer, like he did with the crank, made me shudder, zero mechanical sympathy.

@dabrestauracion7404

3 жыл бұрын

Your comment is appreciated friend !!! ; )