Thank you for the video. My 34 just broke the main spring. That was easy enough .👍

I was not expecting that broken spring, I thought you were just going to grease it! It's been four years since I disassembled my 34 for maintenance so I needed a video to refresh my memory. Obrigado...thank-you, from the United States. 👍

@JGSairguns

3 жыл бұрын

thanks for the positive comment

I am preparing to strip, re-stain, and Tru-Oil my Diana 34 stock. This video gave me the confidence to take apart my air-rifle. Thank you!

Belli i fori per bilanciare il pistone 👏👏👏

I do like your spring commpressor a well thought out simple design,well done.

@JGSairguns

Жыл бұрын

thanks

Is not needed to remove the barrel from the main pivoting point. Is enough that you remove the seeger ring and then the pin of the barrel charging lever under the barrel.

Steel safety guns were the best !!

Dez como sempre meu amigo. Att.João Luiz do RJ Brasil

@JGSairguns

Жыл бұрын

Obrigado João!

Good video

Muito bom, estamos sempre a aprender coisas novas contigo, abraço

@JGSairguns

3 жыл бұрын

Fico feliz em saber

Molla troppo lunga,si rompono,hanno vibrazioni e la forza è uguale.anzi meno. Accorciare sempre🤜🤛

replace the spring. although I have heard they are oversprung.

Nice

Was it still shooting fine with the broken spring or you could clearly feel something was wrong? BTW nice home made spring compressor very simple concept !

@JGSairguns

2 жыл бұрын

Thanks. Yes, I already felt that something wasn't right, sometimes the action didn't trigger

Is it really worth the price? Or are we just paying for the brand name?

@JGSairguns

8 ай бұрын

really worth the price!

Muito bom !

@JGSairguns

2 жыл бұрын

Obrigado por assistir o canal, não se esqueça de se inscrever para não perder os próximos vídeos e activar o sino da notificações, abraço!

Perfeito

@franciscomagro7243

3 жыл бұрын

Bela geringonça para desmontar a mola. ;)

Depuis peu j'ai acquis par hasard le même modèle de décembre 1987 (made in west Germany) également dans un état proche du neuf, je suis tout fou avec. C'est un bon modèle à priori? Enfin j'espère... peut-être pas le ressort du coup🤔. Merci pour la vidéo.

Is it possible to leave the barrel connected to the compression tube yet still be able to remove the piston?

Why is it that when I disassemble my barrel there's only the long spring and missing the short spring like yours.

@shitbird5241

11 ай бұрын

Older type got one that's really old and the small one misses aswell

i have a very similar model to this. when ever i try and cock the gun by bending it back, it snaps back with prettty serious force. how can i fix this?

@JGSairguns

2 ай бұрын

There are several factors that can lead to this problem occurring. Even a simple and common problem like a broken spring can lead to this. I can't help you without seeing the weapon, it's best to take it to specialized technical assistance.

@jesseruks

2 ай бұрын

Thanks I might disassemble it and see if I can solve this issue. I believe it’s trigger related because it will sometime cock properly when I push the trigger forwards

👍👍👍

my air rifle's spring also broke.what caused it to break?ps: i have a second hand air rifle?

I already have diana magnum 350 spring piston air rifle. Can I install nitro piston on it .?

Just about to strip down Diana G80 that has not been fired in over 20 years. Is the process much different?

@JGSairguns

2 ай бұрын

Hello, thanks for the comment. I don't know how to answer, I've never seen any G80. Hug!

Nhieu cay sung ban

Brother I need it help me,how can I get it and where

Cool video. I have a 20+ year old Diana 34 with a bent barrel. Not sure how that happened. Do you know where I can buy a replacement barrel? After watching this video, I am sure I’ll be able to switch it out np. Thanks.

@JGSairguns

2 жыл бұрын

I'm sorry but I can't help, I don't know where to buy another pipe

@Ram-vt3rm

2 жыл бұрын

@@JGSairguns ^ all good, thank you, I will keep my eyes peeled.

Hey i have a rifle similar to this one, i bought it from second hand owner, problem is the front sight seems to be loosen and always fell of after I shot my rifle even after i tighten the screw, now that I tighten it too much the thread is broke. Any suggestion?

@JGSairguns

Жыл бұрын

I'm sorry but I don't know how to help

@reyhaniskandar6916

Жыл бұрын

@@JGSairguns Ahh I see, It's okay then

Hello. Where can I find a new lever pin for a diana mod 40?

@JGSairguns

2 ай бұрын

Hello, I don't know how to help. Thanks for the comment!

Donde puedo. Conseguir. La mira. De la escopeta. De. Dardos. De. Adelante. Y. La de. Atrás. Para. La marca. Diana 24

@JGSairguns

Жыл бұрын

Não sei.

Just replace the spring

Bao nhiêu tiền khẩu đây vậy bạn ơi

Khẩu này bao nhiêu tiền việt nam đồng

Diana 350magnum price kittna hain bhai.

Ketakeha bae

Good day my gun is not firing it takes out things like plastic in the barrel I don't know what's that

@JGSairguns

10 ай бұрын

this can indeed happen, it is the piston seal that is old, rotten and is disintegrating.

@SpitjoDaDeejay

10 ай бұрын

@JGSairguns yooh what am I going to do. The bullet just stuck nor move where I've inserted it 😕

ยากได้มาก

Toi muon nhơ anh tu van

Khau nay bao nhieu vay

Có ban khong em muốn mua 1 cái

Price bos????

@JGSairguns

5 ай бұрын

No sales

Cho xin sdt toi anh tư van

Weihrauch Is Better