There are a couple of ways of turning off AVC on your Spektrum radio receiver. Example shown here is the DX5C with SRS6000 receiver. #Spektrum #AVC
Жүктеу.....
Пікірлер: 72
@2XRC5 ай бұрын
I can’t believe I only found this now. Lol. After so much frustration with my Losi Tenacity 😂
@briancarpenter39233 жыл бұрын
This video was very helpful. Thank you. I kept turning AVC to Inh (Off) but it still handled oddly.
@zubski4 жыл бұрын
Thank you so much, this has helped me so much, even after a year since you posted. I did not know about the trigger pull/push and steering right/left.
@modularrc64284 жыл бұрын
Great video and very informative! I figured this out a few years back when these spektrum avc receivers starting coming with several RTR 1/5th scale rc’s. Unfortunately AVC and gas powered kill switches aren’t compatible together, so I had the scrap them for non avc receivers. Great info nonetheless!
@daviddemingjr35074 жыл бұрын
Thanks for the great vid . Helped me out 👍
@useless8443 жыл бұрын
thank you just got a srs6000 for my axial scx10 iii and this worked
@ddotdrawdoow Жыл бұрын
Dude you are a rock star! Thank you!!!
@dungeonracer42885 жыл бұрын
Thanks for the video. It works using the DX2E radio as well :)
@RazorRC
5 жыл бұрын
dungeon racer awesome!
@IonNight4 жыл бұрын
Thanks. Great totorial.
@RekkrRC5 жыл бұрын
Thank you! I just comped and it was killing me!
@RazorRC
5 жыл бұрын
glad it helped!
@jarek.o26635 жыл бұрын
Thanks. Great video, you so my problem :)
@ReadySetRC5 жыл бұрын
Great info👍 I usually cheat and do option 1😎
@McFly_FPV5 жыл бұрын
Thanks alot man that solved my problem, subed 🌞🌞🌞😎
@RazorRC
5 жыл бұрын
McFly glad the video helped, thanks for subbing!
@GreatLakesRC5 жыл бұрын
Nice motor and ESC combo! 🤪
@motortoys9942
4 жыл бұрын
I've hit 85 on 4s only with this setup
@derka55814 жыл бұрын
Thank you!!
@DanPRC3 жыл бұрын
Question. Can you duplicate a rc so that it has 2 models on 1 radio but wth AVC on one and off on the other without having to rebind when switching the models? I have the InfractionV2 with the handbrake and I added lights to it. I usually run a light switch off chan3 but the handbrake is already there and since I have AVC activated I can’t use the other two aux channels. So is it possible to have the infraction in model 1 spot with AVC on and also have it in model 2 spot with AVC off?
@PaoloNg62015 жыл бұрын
Thanks buddy! With method 1, the aux 1 is basically unusable. It is set to control the gain. I need to use all five channel so I have to use method 2.
@RazorRC
5 жыл бұрын
Ng Paolo awesome, glad it helped!
@RcOffroad95135 жыл бұрын
Holy $#!@ thats stupid! I dont have any spectrum but have enough trouble trying to figure out my m11x radio. Great "how to" video!
@RCNennox3 жыл бұрын
Thanks for this Video! I was struggling with this AVC. :)
@NikkiNexo7775 жыл бұрын
I also do Option 1. It's just quicker that way. Honestly, I'm too lazy to do option 2
@SpookNik4
3 жыл бұрын
Got this on C and D button so i dont have to go into the menu
@westsiderider77454 жыл бұрын
Thaaank you!!!! Gosh
@alpine_pro58144 жыл бұрын
Will dx5c work with Killer Bee switch now for my gasser?
@henrymartin41374 жыл бұрын
thanks bro
@bensp11933 жыл бұрын
Just so perfect video to full disable AVC especially with Crawling vehicles and using all channels. Thx.
@RazorRC
3 жыл бұрын
Glad you liked it!
@dvi-d64 ай бұрын
Hi there. Hopefully this message gets seen. So a strange thing happend. I turned on my kraton for first time in maybe 6 months. So Dx5c on, car on… now usually you have the common 5/6 beeps the car does before its ready to go. But now it does like 2 beeps then the fan slows down and its just idle. But check this… if i turn my steering full right lock it ramps up the fan again, the beeping resumes as normal and then its ready to go. It will actually drive (but only in full lock to the right😰) when i let go of the steering wheel the the fans slow down again and the car is idle. Any idea how to fix this bizarre problem?
@rcpatapouf5 жыл бұрын
Interesting
@thomaskuter66895 жыл бұрын
Very nice Didn’t notice the contra code Question I did everything you did except the code and it still disabled BUT the steering throw was less when I did that. When I turned avc back on the full steering came back. Have you checked to see if your travels the same with and without avc on?
@RazorRC
5 жыл бұрын
Yes, seems like it's the same. I think you have to set the steering travel before binding, probably doesn't work right if you set the travel after binding.
@benjaminkirchner7569
5 жыл бұрын
The travel hast to be a minimum of 80% befor binding.
@MaketoMake815
4 жыл бұрын
Ots not a code as stated in the video. It is for calibrating the transmitter and reciever.
@steffie.morris4 жыл бұрын
Hi I got this radio and receiver as a present and was already able to disable avc but wasn't sure I did it correct since I still have problems. Tnx to your video I know I did this part correct. I only have old servos and none of them correctly on the srs6000. Once connected they all jitter and vibrate constantly. And Don't move smoothly. The servos work perfectly fine on other brand radios. Can the srs6000 not handle analog servos?
@RazorRC
4 жыл бұрын
I think the SRS6000 only works with digital servos, I never tried it with an analog one.
@barracuda2532 жыл бұрын
Dear Razor! If you still have a Spectrum DX5C w/SR6100AT please explain how to setup a failsafe. Thank you!
@00godlovesus5 жыл бұрын
Yes cool:)
@rtoebak765 жыл бұрын
Hey buddy, just a quick question. This receiver 6000 can take a 2s lipo and has no problem with the servo's?
@Abagofweed420
5 жыл бұрын
I run mine with 2 and 3s
@rtoebak765 жыл бұрын
So now we can buy the killer bee and turn off avc. Right?
@myersom115 жыл бұрын
Will the srs6000 work with a dx4c?
@DR.ELEKTRIK3 жыл бұрын
By doing this will the aux channels be functional?
@JeepinIvan_MTB3 жыл бұрын
Can AVC be turned off if I still want my fail safe to work? Thanks
@TheEgb18c3 жыл бұрын
What shocks are those
@AmpHibious5 жыл бұрын
im trying this with my dx2e active tx. for my tenacity truggy and i just cannot get it to work.
@dungeonracer4288
5 жыл бұрын
Try again, I just did this with my DX2E and it disabled the receiver
@gabrielfournier24264 жыл бұрын
Wow, finally! Thanks a lot. Does somebody know how this avc system can be usefull ?
@DR.ELEKTRIK
3 жыл бұрын
If your doing a drag race and you want to go straight!
@nathanz6025 жыл бұрын
Man radios are more expensive than I thought...
@swank1975
5 жыл бұрын
That is a low cost radio for the features it has. Some cost hundreds more.
@RazorRC
5 жыл бұрын
Nathan Zari the Flysky FS-GT5 has most of the features of this one for about $75-80 US. I think that’s a good choice for under $100 and it has AVC/SVC.
@nathanz602
5 жыл бұрын
@@RazorRC I have a Flysk FS-GT3B and I'm going to install it on my ARRMA senton. I like the Gt3b because the value, and I'm not a racer, so I don't need all the features and speed of a race radio or higher end radio.
@kylebeaulieu94843 жыл бұрын
Is that receiver water proof
@todaystopic83454 жыл бұрын
I bought mine from someone and it’s not in English. How do I change the language back to English
@todaystopic8345
4 жыл бұрын
😂 man I had to pause this video so many times and look at you remote in English up stand mine. I was able to bind it but I still don’t understand the language
@handleit5 жыл бұрын
You kept the values at 0% after supposedly disabling AVC and yet you can still hear the servo making noise so I don't think your second method actually disabled it.
@RazorRC
5 жыл бұрын
The second way is what the manual says to do. The slow blinking light means AVC has been disabled, which is what you need in racing to prove it's off.
@paokang12422 жыл бұрын
I not have remote control. But I have avc receiver srs6000.or I can use other remote control too or no pls tell me
@topchoice324 жыл бұрын
But it keeps the car straight why turn it off
@RazorRC
4 жыл бұрын
topchoice32 AVC dulls the responsiveness of the steering. It also does weird things in the air when you jump because it doesn’t know you’re in the air and tries to autocorrect the steering. I prefer to be in control, not the computer.
@MaketoMake8154 жыл бұрын
That is NOT a contra code. That is the reciever in programming mode. You are setting 100% and 0% in all the controllers axis to calibrate it.
@RazorRC
4 жыл бұрын
it was a joke
@kevinbarraza1423
2 жыл бұрын
@@RazorRC dude took the joke way to seriously... Bet he's fun at parties
@danielmiecz9092 жыл бұрын
It didn’t work
@rc-tossen34114 жыл бұрын
that is so wrong.. it's not country code.. But calibration
@RazorRC
4 жыл бұрын
It was a joke, I said "contra code", which was a Nintendo Entertainment System code back in the 80's to give you unlimited lives.
Пікірлер: 72
I can’t believe I only found this now. Lol. After so much frustration with my Losi Tenacity 😂
This video was very helpful. Thank you. I kept turning AVC to Inh (Off) but it still handled oddly.
Thank you so much, this has helped me so much, even after a year since you posted. I did not know about the trigger pull/push and steering right/left.
Great video and very informative! I figured this out a few years back when these spektrum avc receivers starting coming with several RTR 1/5th scale rc’s. Unfortunately AVC and gas powered kill switches aren’t compatible together, so I had the scrap them for non avc receivers. Great info nonetheless!
Thanks for the great vid . Helped me out 👍
thank you just got a srs6000 for my axial scx10 iii and this worked
Dude you are a rock star! Thank you!!!
Thanks for the video. It works using the DX2E radio as well :)
@RazorRC
5 жыл бұрын
dungeon racer awesome!
Thanks. Great totorial.
Thank you! I just comped and it was killing me!
@RazorRC
5 жыл бұрын
glad it helped!
Thanks. Great video, you so my problem :)
Great info👍 I usually cheat and do option 1😎
Thanks alot man that solved my problem, subed 🌞🌞🌞😎
@RazorRC
5 жыл бұрын
McFly glad the video helped, thanks for subbing!
Nice motor and ESC combo! 🤪
@motortoys9942
4 жыл бұрын
I've hit 85 on 4s only with this setup
Thank you!!
Question. Can you duplicate a rc so that it has 2 models on 1 radio but wth AVC on one and off on the other without having to rebind when switching the models? I have the InfractionV2 with the handbrake and I added lights to it. I usually run a light switch off chan3 but the handbrake is already there and since I have AVC activated I can’t use the other two aux channels. So is it possible to have the infraction in model 1 spot with AVC on and also have it in model 2 spot with AVC off?
Thanks buddy! With method 1, the aux 1 is basically unusable. It is set to control the gain. I need to use all five channel so I have to use method 2.
@RazorRC
5 жыл бұрын
Ng Paolo awesome, glad it helped!
Holy $#!@ thats stupid! I dont have any spectrum but have enough trouble trying to figure out my m11x radio. Great "how to" video!
Thanks for this Video! I was struggling with this AVC. :)
I also do Option 1. It's just quicker that way. Honestly, I'm too lazy to do option 2
@SpookNik4
3 жыл бұрын
Got this on C and D button so i dont have to go into the menu
Thaaank you!!!! Gosh
Will dx5c work with Killer Bee switch now for my gasser?
thanks bro
Just so perfect video to full disable AVC especially with Crawling vehicles and using all channels. Thx.
@RazorRC
3 жыл бұрын
Glad you liked it!
Hi there. Hopefully this message gets seen. So a strange thing happend. I turned on my kraton for first time in maybe 6 months. So Dx5c on, car on… now usually you have the common 5/6 beeps the car does before its ready to go. But now it does like 2 beeps then the fan slows down and its just idle. But check this… if i turn my steering full right lock it ramps up the fan again, the beeping resumes as normal and then its ready to go. It will actually drive (but only in full lock to the right😰) when i let go of the steering wheel the the fans slow down again and the car is idle. Any idea how to fix this bizarre problem?
Interesting
Very nice Didn’t notice the contra code Question I did everything you did except the code and it still disabled BUT the steering throw was less when I did that. When I turned avc back on the full steering came back. Have you checked to see if your travels the same with and without avc on?
@RazorRC
5 жыл бұрын
Yes, seems like it's the same. I think you have to set the steering travel before binding, probably doesn't work right if you set the travel after binding.
@benjaminkirchner7569
5 жыл бұрын
The travel hast to be a minimum of 80% befor binding.
@MaketoMake815
4 жыл бұрын
Ots not a code as stated in the video. It is for calibrating the transmitter and reciever.
Hi I got this radio and receiver as a present and was already able to disable avc but wasn't sure I did it correct since I still have problems. Tnx to your video I know I did this part correct. I only have old servos and none of them correctly on the srs6000. Once connected they all jitter and vibrate constantly. And Don't move smoothly. The servos work perfectly fine on other brand radios. Can the srs6000 not handle analog servos?
@RazorRC
4 жыл бұрын
I think the SRS6000 only works with digital servos, I never tried it with an analog one.
Dear Razor! If you still have a Spectrum DX5C w/SR6100AT please explain how to setup a failsafe. Thank you!
Yes cool:)
Hey buddy, just a quick question. This receiver 6000 can take a 2s lipo and has no problem with the servo's?
@Abagofweed420
5 жыл бұрын
I run mine with 2 and 3s
So now we can buy the killer bee and turn off avc. Right?
Will the srs6000 work with a dx4c?
By doing this will the aux channels be functional?
Can AVC be turned off if I still want my fail safe to work? Thanks
What shocks are those
im trying this with my dx2e active tx. for my tenacity truggy and i just cannot get it to work.
@dungeonracer4288
5 жыл бұрын
Try again, I just did this with my DX2E and it disabled the receiver
Wow, finally! Thanks a lot. Does somebody know how this avc system can be usefull ?
@DR.ELEKTRIK
3 жыл бұрын
If your doing a drag race and you want to go straight!
Man radios are more expensive than I thought...
@swank1975
5 жыл бұрын
That is a low cost radio for the features it has. Some cost hundreds more.
@RazorRC
5 жыл бұрын
Nathan Zari the Flysky FS-GT5 has most of the features of this one for about $75-80 US. I think that’s a good choice for under $100 and it has AVC/SVC.
@nathanz602
5 жыл бұрын
@@RazorRC I have a Flysk FS-GT3B and I'm going to install it on my ARRMA senton. I like the Gt3b because the value, and I'm not a racer, so I don't need all the features and speed of a race radio or higher end radio.
Is that receiver water proof
I bought mine from someone and it’s not in English. How do I change the language back to English
@todaystopic8345
4 жыл бұрын
😂 man I had to pause this video so many times and look at you remote in English up stand mine. I was able to bind it but I still don’t understand the language
You kept the values at 0% after supposedly disabling AVC and yet you can still hear the servo making noise so I don't think your second method actually disabled it.
@RazorRC
5 жыл бұрын
The second way is what the manual says to do. The slow blinking light means AVC has been disabled, which is what you need in racing to prove it's off.
I not have remote control. But I have avc receiver srs6000.or I can use other remote control too or no pls tell me
But it keeps the car straight why turn it off
@RazorRC
4 жыл бұрын
topchoice32 AVC dulls the responsiveness of the steering. It also does weird things in the air when you jump because it doesn’t know you’re in the air and tries to autocorrect the steering. I prefer to be in control, not the computer.
That is NOT a contra code. That is the reciever in programming mode. You are setting 100% and 0% in all the controllers axis to calibrate it.
@RazorRC
4 жыл бұрын
it was a joke
@kevinbarraza1423
2 жыл бұрын
@@RazorRC dude took the joke way to seriously... Bet he's fun at parties
It didn’t work
that is so wrong.. it's not country code.. But calibration
@RazorRC
4 жыл бұрын
It was a joke, I said "contra code", which was a Nintendo Entertainment System code back in the 80's to give you unlimited lives.