Did this with blue lights on my 17 Overland. Bought black out stickers on Amazon to fix the back two lights.

@BlklimitedX

3 жыл бұрын

Nice! I’ll have to look into the stickers for mine because they’re pretty useless now lol

@MrMcDrunk

3 жыл бұрын

@@BlklimitedX I used the small stickers to cover the lens and then one of the three big ones to center and make it look as clean as possible. Here’s the link on Amazon for the ones I used. Hope it helps. 100% Black-Out Sticker, Light Dimming Sticker,LED Cover www.amazon.com/dp/B092MDFC3P/ref=cm_sw_r_cp_api_glt_fabc_92CW5GTXSFR98XJ4KYRS?_encoding=UTF8&psc=1

@BlklimitedX

3 жыл бұрын

@@MrMcDrunk thank you man I appreciate that!

@MrMcDrunk

3 жыл бұрын

@@BlklimitedX Happy to help. That pack also comes with a small set of tweezers. Def suggest using them. They come off the paper much easier and keep them smooth when applied. Fingers can kind of scrunch up the edges. Side note, when applying have your doors shut just in case you turn one on by accident. Stupid push halogen lights. 😂 best of luck!

@BlklimitedX

3 жыл бұрын

@@MrMcDrunk I’ll let you know how it goes when they get in bro 💪🏽

I really appreciate the work you do to put these videos together... much thanks!

@BlklimitedX

2 жыл бұрын

Thank you man, I appreciate that 🙌🏽🙌🏽

Perfect man, I was wondering about those back passenger lights. Thanks for the video

Thank you! This helped out so much!! 💪🏼

Great videos and glad I found them. I am in the process of tricking out my Pearl Black Limited X!

Beautiful steering wheel. I'd get one, but I'm not willing to give up my heated wheel lol

I plan on making the floor lights blue, had it like that in my mustang, and really liked it. Thanks for the tutorial!

Love your content man Also when it comes to the dome lights you can easily remove the panel by pulling it down and change the lights from there makes it a hell of a lot easier

@BlklimitedX

2 жыл бұрын

Thank you man and appreciate that tidbit. I’m just glad the job went easy for me lol

Great video bro

@BlklimitedX

3 жыл бұрын

Appreciate it bro 💪🏽

damn those LEDs look great! definitely clutch for the lack of lighting in the trunk too lol Lovin the Blk X bruh 🔥💯

@BlklimitedX

3 жыл бұрын

Lol right I can actually see in my trunk now. But thanks bro, these were worth it, I definitely recommend them.

@ScRiLL1127

3 жыл бұрын

@@BlklimitedX no doubt man ima def check em out!

Good job bro !!

@BlklimitedX

3 жыл бұрын

Thanks bro 🤟🏽

For the visor...I turn the LED bulb towards the mirrors. They actually come out better

@BlklimitedX

3 жыл бұрын

I may do that because they’re to bright I can’t even see myself in the mirror lol

@robrat4909

3 жыл бұрын

@@BlklimitedX you will get better lighting for the mirror qnd won't be blinded...keep up the work on the black X

@BlklimitedX

3 жыл бұрын

@@robrat4909 thank you 🤙🏽

My 2018 has way too much reflective chrome in the inside. I also want to make the rest of those dimmable leds red instead of blue.

🙌🏽🙌🏽🙌🏽

🙌🏾🔥

Where did you get your carbon fiber inlay near the shifter and cup holders? It looks awesome.

@BlklimitedX

2 жыл бұрын

Thank you man, and I got them off Amazon. Here’s a link to it 🤘🏽 www.amazon.com/dp/B07WPW12N8/ref=cm_sw_r_cp_awdb_imm_7TB5X067ZDY17CZFWN7D?_encoding=UTF8&psc=1

Awesome video but heads up on replacing the map lights. Don't pry out the lenses like the video has you do but pull the whole console down from the roof. It's just held on with a few metal clips. The bulbs are much easier to replace that way. I started by prying down the lenses and wasn't able to get the bulbs out so I went and just took the overhead console down. Replaced the bulbs just fine. But when I popped the lenses back into place neither of them would let you click to turn on the lights. Totally my fault but for sure you CAN damage the console if you do it this way. I ended up buying a replacement on ebay for $100 so not a huge deal. There are also a few torx screws holding on a cover and I think when you remove them you'll be able to get at the front incandescent bulbs. I just didn't have a torx bit small enough for them.

Where did you get the small flathead screwdriver at? The one you got the vanity mirror lights covers off with

Can you change that other little light under the floor mat to led ?

I'm only looking for those back seat small lights. And there isn't a single video on how to change them

@rayben3972

9 ай бұрын

Did you get them? Are they the ones under the grab handles? If so I took the out with a straight pick, on the front side. The side that has the button, just pry between the lens and trim and it'll pop out easy, then reverse order to put back in

@94ana11

2 ай бұрын

@@rayben3972 Hi question I i poped out the trim, but I'm having trouble installing back on. Do you know how to install back ?

@rayben3972

2 ай бұрын

@94ana11 do you mean the clear lense? That's all I popped out with a small flat head screwdriver and it went back on the opposite way it came off

@94ana11

2 ай бұрын

@@rayben3972 no the black trim around it. It's so it can stay mounted in.

@rayben3972

2 ай бұрын

@@94ana11 I didn't remove that

I use electrical tape and wrap around the bulbs to pull them out. No need for needle nose

Where did you get that steering wheel?

Where did you get the Carbon fiber steering wheel as well as the carbon fiber for the cup holder area?

Where did you get the centre console carbon fibre ?

Is it possible to change the other map light the one that still looks yellow

They are pricey but trust me it's well worth it and the quality is great.

@BlklimitedX

3 жыл бұрын

Well Crux Motorsport has the kit for 63 bucks which is a great price in my book. And yes they’re absolutely worth it.

Why u ain’t click the light on n off after the led on dome lights 😅🤣🤣. I just did mine so I know. Them pieces just pissed me off

💚💚💚

❣️

Wrap your needle nose pliers with some electrical tape a couple of times to keep them from slipping next time. Good video though. Thanks!

Nice video. What about the back seat lights the 2 small ones.

@justincochran3576

6 ай бұрын

Pop off 2 black covers, remove 2 screws, pop light housing off with 2 tabs and slide out lens cover. I couldn't find a single video on it just had to tackle it alone

What about rear doors lights

Is this lightning pure white or cool white ?

Link to the steering wheel ?

great

@BlklimitedX

3 жыл бұрын

💪🏽💪🏽

Can u do video on how to do a chrome delete ?

@BlklimitedX

2 жыл бұрын

I’d be more than willing to if someone with chrome allowed me to. My Jeep already came blacked out so it was no need for mine. But if someone locally wants it done, I’ll do it free of charge and even buy the kit.

@cypherkey2012

2 жыл бұрын

@@BlklimitedX where u located fam I need mine done

@BlklimitedX

2 жыл бұрын

@@cypherkey2012 Sterling Heights MI where about are you?

Where did you get that steering wheel cover ?? Tufff

@BlklimitedX

2 жыл бұрын

Thank you man and the entire wheel was new and custom from a shop off eBay.

Dude fr why are they so slippery to grab

This is the second video I've watched were they neglected to show the back seat. You didn't change those?

@rayben3972

9 ай бұрын

Are you needing help with them? I just finished changing my interior lights.

@heywoodjablome2018

9 ай бұрын

@@rayben3972 were you able to change the ones in the back seat the two little round ones?

@rayben3972

9 ай бұрын

@heywoodjablome2018 I have the 2015 grand cherokee, only back lights I have are in the handles above the door and on the liftgate

@heywoodjablome2018

9 ай бұрын

@@rayben3972 ahh gotcha, I have a 2020 and it appears they can't be changed. If you watch his video he doesn't show the back seat and when he shows it from the back you can still see the yellow light. I got to do some more research. Thanks anyways though bud.

So there is no way to change the rear passenger lights at all?

@BlklimitedX

3 жыл бұрын

There is but it’s more hands on like removing the entire headliner I think. But they can be changed I think.

@Loso0523

3 жыл бұрын

Even if you remove the headliner it’s still a headache because there soldered on smh

@BlklimitedX

3 жыл бұрын

@@Loso0523 see I figured it was something like that lol I’m just going to leave them alone

@foofstarr4856

2 жыл бұрын

@@Loso0523 so it cant be done?

Not true about the lift gate lights....just pop the plastic lenses off and the bulb is right there 🤦‍♂️

@BlklimitedX

2 жыл бұрын

Doesn’t work, I tried and I’ve installed those lights on other Jeeps. The lens cap doesn’t pop off.