This story and journey is told so well! I want this on my shelf! I'm honored you got my cute overbite dino card and turned it into this. Though I'm also curious what you would have digitally kitbashed with that Crafsman card... 🤔

I drew the spiked Dino tail and I am blown away but how you totally nailed it! It looks awesome, the whole Dino looks amazing!!!! Also I LOLed at your amazing guitar solo :-)

@3DPrintedTabletop

3 жыл бұрын

I LOVED the tail! Thank you for making something that forced me to get uncomfortable and try something new, Raquel! Fortunately, the bottom half needed very little work :D Fun fact: I actually play guitar. Solos may vary though!

Loved this video Danny! Great storytelling

Danny I love the story on your process! It was an absolute pleasure to work with you. And you weren't behind, just on Miami time 😉

this guy has the absolute coolest voice nd vibe

Worth the wait in so many ways.

I really want to build a diorama with these two rivals. Great video Danny, I love seeing people push themselves to do new things and you nailed it! Dinobot4000 is a beauty!

Danny looks like the family friendly version of the Punisher

This looks like Beast Wars Megatron witch looks amazing!

@Brickerbrack

2 жыл бұрын

He was my first thought too when Danny mentioned purple dinosaurs... 😉

you're being so hard on yourself, this is incredible! I love the story behind dinobot and you absolutely CRUSHED it! I love the narrative of this video so much, and your process was so unique and fun!

5:57 There is something about cyborg dinosaur parts being held up by scaffolding that just hits right

This robo dino is super awesome, but just gotta say thanks so much. I watched your first digital kitbashing video, the one with the gun totting owlbear, and after watching it a few times I dove into doing my own digital kitbashing, and been having fun ever since! I have a little experience with 3d modeling, doing game modding way back in the day, so had a little experience with blender jumping in, but was much like you with the lack of skills in it. That said, the sculpting feature is phenomenal and intuitive! I have found that assembling parts in 3D Builder, the program you used in the previous video, then saving/exporting that as a .obj after some Merging of different meshes makes for a good base to add details to in Blender proper, though you gotta take care about how it decides to calculate new polygons and vertices when doing that. I am do glad I found your vid those months back, and hope you keep making cool, inspiring things Danny!

Hi everyone! #MonsterBash was amazing, you should absolutely check out all of the other videos in this playlist: kzread.info/head/PLiWIXKdHWWrttB8sTsHdc3ClLe0A5pMRz ENJOY! Happy Printing!

Dude your back! Missed your uploads. You're the reason I got into this hobby!

Did someone on the challenge actually pull a card with the Crafsman on it? I want to see that monster

@velrockartminiatures

3 жыл бұрын

I noticed that haha

I watch a lot of crafting but never any 3D printing or digital sculpting stuff so this was super new for me. I was surprised at how interesting and entertaining it was, with its own set of design challenges and creativity. Thank you for opening up a new horizon to me. And your results were awesome and super fun. I love that you could incorporate him into another project you’d already done.

I clicked on this video because I thought for sure it was homage to Megatron and Dinobot from Beast Wars. I mean you had the color scheme for Megatron down to a T! So surprised he wasn't your inspiration lol Great work though, you got a sub from me!

Love your approach and vibe! The honest storytelling and description of the struggles you had is just refreshing! And the end result ROCKS!!! So great!

Cool dinobot for a cool colab man, Its also nice to see you shout out blender - I'm a blender code contributor. Good luck with sculpting and happy printing!

I love the channel. Would love to see more from the Kickstarter and how it went

1:38 THAT IS CRAFSMAN! Crafsman steady craftin. In fact you should get him for the next monster bash :-)

@3DPrintedTabletop

3 жыл бұрын

There's a reason I kept the frame there :D I was hoping someone would get him, but alas it didn't come to pass...next time!

You can't go wrong with metal dinosaurs, I love it!

Loved this video, and I think your painting is great. Great stuff.

when the ff7 ref came in i died.

@3DPrintedTabletop

3 жыл бұрын

SHINRAx3DPrintedTabletop collab ftw 😁

I am so happy I am not the only who adds Final Fantasy flare to my games.. I know you have done a few in other videos .. But this one made me smile the most because how creative it is..

It's funny that you say you're not good at painting, because I thought your paint job looks gorgeous!

wow this was so inspiring dude! out of all the videos in the monster bash, this one spoke to me the most. I am not a modeller or garbage putter-together-er but I'm totally a 3D printer! great to see a fellow 3D print enthusiast get into the mix on this one! Awesome job! Keep it up!

I'm working my way through all the monster bash videos, and all I can say to you is BE MORE CONFIDENT! Your work is amazing and you should be so proud! I love Dinobot4000!

this was one of my favorites, I guess because it reminded me of my childhood watching Dino-riders.

Miscast's playlist brought me here and I have to say I love the ideas you did. I'm just getting into the whole modeling game but I love what you did! You made it and owned it! Great job!

Laser Unicorns Kung Fury vibes for days😜 love it!

This is so awesome. Your monster turned out incredible, I love the creation story, the collaboration is so inspiring, and the DINOBOT-4000!! Thank you for sharing such a super cool story.

Wow! First time i am watching 3d printing Video, blown away ! Love Ur dinobot !

That build is awesome, you should be proud of what you accomplished. Very cool!

Found your channel through this monster bash challenge and I just want you to know that you do great work and you're also hysterical. You've gotten at least one more sub!

Love to see some Crafsman Steady Craftin love 1:36

I'm new to the channel and 3D printing in general but this is some of the coolest stuff I've seen so far. You've got a new sub. Keep up the great content!

The painting actually looked really cool!

Honestly, the stupidity of a cyborg dinosaur with a gun fits in perfectly with all the other absurd bullshit in this challenge. You did good.

When I hear purple and green dinosaur I think of beast wars Megatron XD

Awesome video Danny! You are a great storyteller. You made me want to do another monster bash just to try digitally sculpting and printing something that fills the z volume

I think it look very cool. Colors came out great too.

3D Printed Tabletop: I didn't have time to learn something easy. Also 3D Printed Tabletop: So I decided to learn something a lot harder! (3D Modeling/Sculpting)

I loved watching your journey though this task, and I always love your content. If you start actually working on gap filling for your prints, if I can make a suggestion, try either Vallejo or Tamiya plastic putty. It's designed specifically for that and it works absolutely wonderful on resin prints. I use it for a lot of gap filling on my prints. Looking forward to seeing more forays into the monster factory!

I love your fun personality and your genuine approach to the Creative process, it encourages me to get creative myself. thanks for putting this out it made my day!

I do a lot of customs myself. You did a really great job and I learned much from you today.

It's called "exquisite corpse" a baseline of the surrealist art movement.

Dope AF! Keep up the awesome work! You always inspire me man.

I wanted to say to each of you that I think the best part of the entire collaboration is that you all stated that you tried something you might not have without the push of the collaboration. That means it was a I've successfully for all of you and every one of us watching! Bravo to the group!

I know people always talk about how wholesome Brent from Goobertown is, but honestly I think you are the most wholesome person in the hobby. I love your videos and how relaxed you are. No artificial persona, just pure Danny.

Love you Danny. The fun you have comes through as always. Great to see an update.

Wow! This project is fantastic!

You unironically made the model more scientifically acurate by posing it's arms in the right way

Love how you are so cool about focusing on the parts that you love, and not need to go for perfection every time. Makes the rest of us hobby nerds stress out less about our own shortcomings. I'm the same way - I can't be bothered to fix every little crooked seam or blemish - I wanna paint the thing and turn it loose on my players. They'll go WOW either way, so why stress out over things that are hard to get right? :)

I was waiting for yours. I was excited to see what you came up.

Wanted to say that out of all the videos I've seen about this topic yours are the best. I binged watched your whole channel thank you for the great content.

amazing my friend. you really maxing out your skills. the result is outstanding! you could really be proud of it - couse you did it!

0:57 i was doing the saaaame thiiiiiing LMAO!

Really love the video well done keep up the good work 👍

Honestly, you should give yourself more credit when trying to compare your work to the other participants. You did a great job and managed to not only use this to learn new skills, but make a really fun and funny creature! Well done~

what are you talking about I think I need a Dinobot 4000 for my 40k army! best model ever!

Very cool! Nice to see someone else who don't like filling gaps too haha... I just had some major gaps to fill on a red dragon from lord of the print on a video on my channel too!

Yes! A new video! Thanks for the tips and advice you post!

omg so much kitbashing happening now, gawd i hope i can get involved, amazing stuff man!

“The dinosaur would die, and lose his sight too”. Kinda doesn’t need its sight if it’s dead lol

Nice one dude ... it ends up rly great.

Looks awesome, great job!

I need to get into painting! Those look great.

This one is one of my favorites so far! (I've seen 9 at least)

Very cool. A couple of the other people in this challenge are in my discord

Great job on Dinobot 4000

I really like this guy and this channel

@3DPrintedTabletop

3 жыл бұрын

I like you too, EJRZ!

I love the lore 😃

I hear the wings moving at 5’ as the Dino moves closer... chomping widely in the air. Oh how will we survive. I know EMP.

Finally a new video! I miss your stuff man!

Looks like a Extreme Dinosaurs villian

That looks so neat

Loved it!

this is so cool!

This is so good

I love it! 😍

Really Nice!

Oh that's the Papo Allosaurus. Or at least the models seems to be based on that one.

Wow thats soooooo Kung Fury!

Danny, This is so great! Maybe we will see a cheeky photo depicting DINOBOT-4000 V. ANGRY OWLBEAR ;)

Dino-bot! Awesome!

It's so cute!

You say you're a poor painter, but I just rewatched the 3d kitbashed owlbear, and it looks quite good! I know this a 3d printing channel, but could you share how you painted your Owlbear?

Awesome!

Wow great sculpting and posing especially for a first attempt. I've yet to even do that. What tutorial did you use?

Hugs Danny, you rock bro!

Dinobot? He's purple, like Beast Wars Megatron though!

Hi Danny, great video :) Sorry, I know u get this question alot, but what I'd a great 1st level filament printer for terrain and buildings for d&d? I have mi Elegoo Saturn for minis, but I jave never used a fdm printer. Thanks :)

Barney took a turn..

danny you sould print dino saucers a kids cartoon show back in the day.

I love your video

you all did good

I feel like this would be how my monster mash would end up. "How can I make this out of existing minis?"

this reminds me of I'm Transformers Beast Wars Megatron

Plzzzzzz make this file public so we can have a go at painting it and further kit bashing it :)