Gratuliere, sieht schon viel smoother und besser aus als die erste Version. Das Lichtspiel ist ruhiger und angenehmer. Gefällt mir sehr!

Absolut genial, klasse Demo 😎

Einfach nur klasse. 👍👍👍Sehr praktisch

love the animation on these. looks like you are having a bit too much fun playing with dolls! lol🤪

Nice & Cool...

Hi. Sorry currently not. I'm not done with this project. It's only a prototype. In next time I will make PCBs and test all things. When I have news you can read it in my Instagram profile. Thanks for watching. Best regards Benni

Das ist wirklich genial und ist ein echter Hingucker!! 👍🏻 Mfg Thomas

@tinkerfun

4 жыл бұрын

Danke dir 👍

I love this project. In my opinion you can use 2 sensor only 1 ontop and 1 on bottom then you just select a delay for 10 seconds to off the lights. Let say Distance= how many cm or inches form sensor to wall if sensor1>distance Then All Lights on with animation Delay for 10 seconds Lights off with animation Else Lights off if sensor2>distance Then Lights on Delay 10 seconds Lights off Else Lights off. That's only my idea I'm a beginner in Arduino. But thanks for the idea

Amazing i love it Is there available any schematic and code for v2 stair motion

Woooowww,,,😯😲👍

This is exactly what I need tor my staircase!!! When do you think that jou more info, cause i'd like to build it!!! I tried it with motion sensors but this is so much better!!!

Is there available any schematic and code for v2 stair motion led?

amazing!! please, share more info I making my house and I need this!! :D

You are great Its so nice project sir. Can you make detailed video on this project.

can you please let me know what exactly led strip are you using in this project ? thanks in advance :)

I want to build the same, can you help me with the complete info please

Ein Kracher dieser Macher!👍 Grüsse Benni

Have you finished the project? I have been waiting for 2 years to see how everything works. Plz plz plz don't abandon this.

Hi, is this project applicable in 3 entry points? very well

please sir share the code. i watched your prototype 1 too and the prototype 2 is grate. waiting for your response. thank you for sharing this video.

Why two sensors on the top and bottom of the stairs? Why not just have one sensor either upstairs or downstairs, on the wall facing the center of the stairs, and that would activate when there is any motion in its path (like a security cam room motion sensor does)?

Nice work. Why you use two sensors on each side? You can use only one VL53L31X sensor on the beginning and another on the end, using zones.

hi can I get it shipped too Kinshasa Congo? how much will it be ?

Any updated on this project?. I the product details available to buy????

HI. that looks amazing. Is it rgb led strip or just white strip. Is that have to be addressable led strip?

Schönes Vide ;D Genau sowas habe ich schon programmiert mit ws2812b stripes ;D lustig das hier hauch zu sehen ;D

@kevinngnova

Жыл бұрын

Hey do you have instagram i would like to know lil more about this project am going to do out door. Thanks

I need this how I can get it

Can you do this for WLED?

Moin. Bin gespannt. Gerade auf die Einfachheit der Installation, ob es für einen ElektroHonk wie mich möglich ist, es nachzubauen.🙃🤪

It's like a 3 ligth switch systems instead to having the switch using sensor to on and off assuming there is not coding involve the outcome is great.. hope you update your website and sell the dyi online I will buy it... this kind of work the " pro " dont do it great video man... thanks for this amazing ideas also I notice the light direction both side I guess you have 2 light strip in the same channel 1 for upside when the 1st sesont is activated and get off a soon as some activate the other

This is awesome! It's not easy to get into manufacturing & selling these, but it would be easy for you to sell the plans & instructions to people on the internet and make some money from your excellent work that way.

@tinkerfun

4 жыл бұрын

Yes I will when I'm done and have time to make plans/instructions 👍

@DeLayGer

3 жыл бұрын

@@tinkerfun und? Gibt es hier schon Neuigkeiten? 😊

@tinkerfun

3 жыл бұрын

Sry nein 🙈

@DeLayGer

3 жыл бұрын

@@tinkerfun schade. Ist das Thema sehr auf wenig? Wenn man nur 3 Sensoren haben will? (unten, mitte, oben). Der dann einfach reagiert? (mehrere Personen mal ausgeschlossen). Also ganz simpel.

any update about this project?

I would like to implement this project in my house.. how can we get in contact

can you share the details like how you did this, the program code....

@tinkerfun

4 жыл бұрын

Hi. Sorry currently not. I'm not done with this project. It's only a prototype. In next time I will make PCBs and test all things. When I have news you can read it in my Instagram profile. Thanks for watching. Best regards Benni

What a lovely concept.. love it bro... Pls help us providing the code and sketch .. God bless you..

@pritamsarkar3924

4 жыл бұрын

Pls tell us the project information..pls make a make a video.. it's a long break.. we are looking for it.. pls... This is amazing... I have been searching video on automatic staircase light about a month but , in KZread no video available like your video... This is just amazing..

Where can I buy this????

Please upload every single detail of it. I want to make it.

Code for V2, please.

@uilianmesquita3875

2 жыл бұрын

got the code?

@NaushadAlam-zb4lc

Жыл бұрын

@@uilianmesquita3875 bhai code dedijiye

Hi love this! Interested in what sensors you are using on the V2 of this. Thanks

4 жыл бұрын

VL53L0X

Do you make a tutorial or sell me the code with tutorial? I'm from Brazil

Super nice man, just have a quick question regarding the sensor. Are you using the VL531LX? I have noticed this sensor goes buts with some light waves, so either at some point of the day or by having natural light that runs at that wave-lenght the sensor goes nuts and the counting too. Have you experienced this? We (A group of people trying to create a good occupancy detector sensor) are actually looking at other sensors because this problem with natural light

@tinkerfun

3 жыл бұрын

Yes the sensor is sensitive to sunlight. I have built a test setup with the sensor for a human counter outdoors. It did not work well above a certain brightness. I later used a simple lidar sensor. A little bigger but more reliable .

Hi nice stair lights. Please share the code and circuit

Hi,Thank you for inspiring me with your project. Can you tell me which sensor you are using

@bhargavmdubal

3 жыл бұрын

Those are ultrasonic sensors

Hola amigo me gustaría tener esta programación

Ma qualcuno ha qualche scheda tecnica di come farla

Hello, Have you decided which sensor you will use for your real stair? Because in your test model is easy to find a lot of kind of sensors (you're using a VL53L1X sensor), but for long distance I'm not sure which one is better. Also, I’m not sure if having two sensors too near will interfered one to each other.

@jacekk6913

3 жыл бұрын

It's a laser. Laser gives you a point light and not a cone type. There's no possibility to interfere. The solution is simple - two lasers above and below. You just count people in and out - based on the laser light cut order. If two people will pass themselves in the laser area then you have a problem with counting mismatch and the light will be still on or will turn off to fast. The stairs is like a corridor - you need to go back or go forward. You can't vanish there.

Available in india

Any updates on this yet? Very curious from educational purposs too

@tinkerfun

4 жыл бұрын

Sorry there is no update. I worked on many projects in the moment. I want to finished some before I developed this to final. I have not so many time between my main job and my family. Follow me on Instagram to check out when it goes forward in this project. Tinker.Fun Benni

This project buy please tell me price

The Code, pleeeeeeeaaaaaseee 🙏

hi sir nice job excellent can you share Arduino code & schematic ...

I definitely like this idea more than a simple sensor top and bottom. When can you release more information on how to purchase this from you? I’m currently building my staircase now but I’m waiting on something like this before finishing

@tinkerfun

4 жыл бұрын

I'm not selling this. I have no business. This is just my hobby. This is current information about the test model. When the system is ready for a real staircase I will publish it too. tinker-fun.com/DigitalLEDStairLightingV2

@Lafiro

4 жыл бұрын

@@tinkerfun I just used a different concept from someone selling a kit from Latvia. Used Arduino and LED strips under each step. I must say it came out looking very nice but technology wise, such as people counting, it does not do. I have my other staircase going to the second floor which I can modify to get this exact setup working as you showed in this video. When you are ready and if you are willing to share, please let me/the community know. I would like to also reproduce your setup at my house with my second staircase. I think it would be a great/amazing addition.

Mujhe set karwana hee

Please brother 🥺 give me circuit diagram 📉 and code 📟 of Arduino please reply me please brother

Hi Sir, Can you please share the details like how you did this? I’m curious to install this project in my New house..please help me out.

@Blober112

4 жыл бұрын

The basic idea would be that there's two sensors at the top and two at the bottom of the staircase. Lets call them 1 and 2. 1 being the sensor on the outside of the staircase and 2 being the sensor on the inside of the staircase. If sensor 1 is broken then 2, a person has entered If sensor 2 is broken then 1, a person has left Person walks onto stairs, sensor 1 sends a signal first, then 2. *Tally person one person on stairs Person walks off stairs at the bottom, sensor 2 sends a signal first then 1 at the bottom *Remove one tally from person on stairs Lights stay on if Persons on stairs = >1 Light fades from the sensor set opposite to which last read a person leaving, to person entering using addressable LEDs

@bert9427

4 жыл бұрын

@@Blober112 what if you activate sensor 1 then 2 then you change your mind and went back, does this turn the lights off?

Grandpa:"I never asked for this"

how

Code for V2, please

Wow, einfach genial! Super Arbeit! Ich würde so etwas ähnliches für meine Hausflur machen, was alles braucht man denn dafür?

@tinkerfun

2 жыл бұрын

Danke für dein Feedback. Ich kann dir leider keine Bauteile Liste geben, da es nur ein Prototyp ist. Das Produkt wird gerade von einem Elektronik Hersteller weiter entwickelt und kommt dann hoffentlich bald auf den Markt. Liebe Grüße Benni

Its so nice project sir .. Can you make detailed video on this project .

@tinkerfun

4 жыл бұрын

Yes I will make a video when I have done my prototypes.

@boopeshkumarprabhakaran

3 жыл бұрын

@@tinkerfun more than a yr still waiting for detailed video 😔

@tinkerfun

3 жыл бұрын

@@boopeshkumarprabhakaran sorry but that's life. I have other projects or to do's with higher priority 🙁. Best regards Benni

@boopeshkumarprabhakaran

3 жыл бұрын

@@tinkerfun actually I made the same project with ir and sonic sensors... Your project inspired me to do soo.. Also added few more stuffs and funtions 😉

Kothy paowa jabe

Great job, really love the idea and never seen anything like this before. Unfortunately the world is big but it is so hard to find someone with such amazing skills, would you ever sell this kit? I'd buy it immediately...

@tinkerfun

4 жыл бұрын

Yes, but it is currently too complicated for me to produce and sell electronic products in Germany, because there are many guidelines and you have to have some certificates issued. This is for me as a small company currently too expensive / complex. many greetings from Germany Benni

@luisbangueses

3 жыл бұрын

@@tinkerfun What sensor do you use?

Top, wie sieht das mit Haustier\Katze aus? 😀

@tinkerfun

4 жыл бұрын

Bei denen geht es auch an. Sei denn man baut sie höher, aber dann wird es evtl bei Kinder schwierig.

This is awesome and exactly what I'm trying to do. I think I understand how the logic works, but can I ask what you're using for the sensors?

4 жыл бұрын

VL53L0X

Can you write the components

Hi Benni, bist du inzwischen schon weiter und kannst dein Projekt für uns veröffentlichen?

@tinkerfun

4 жыл бұрын

Hi. Leider nicht. Mein Zeitplan lässt mir da leider einfach keine Zeit. Ich muss es immer wieder verschieben. Ich bräuchte da glaub bald einen Mitarbeiter 😂. Aber will mich nicht beklagen, ist ja auch gut, wenn ich Aufträge habe, aber dann ist leider wenig Zeit für Entwicklung. Liebe Grüße aus Ahaus

Schon verwirklicht? Würde gerne sowas demnächst einbauen.

Can you share the code and hardware hookup?

@ruicosta3094

3 жыл бұрын

Will you share the project details?

@ruicosta3094

3 жыл бұрын

Can you share the code ans connections?

Hey bro. Did you ever manage to finish this project for publishing purposes? Would buy the plans if you made them available… this is exactly what I need for my stairs :)

@tinkerfun

2 жыл бұрын

hi. Sorry. Currently I can't offer you anything yet. Solutions will be discussed with an electronics company at the beginning of 2022. I can't give you any more information at the moment. Best regards.

@mh01202

2 жыл бұрын

Any more updates on this project?

@dannyvannierop805

Жыл бұрын

@@tinkerfun Hi.....tried to contact you via your site a while back. Any update on this?......working on my staircase at the moment and I can sure use your system. Krgds

@tinkerfun

Жыл бұрын

@@dannyvannierop805 sry, no update.

Hi, awesome job! I need to make the same thing on my stairs and thankfully I found your video. I’m from Italy, can you share or sell the project?: components, sensors, program if it’s made by arduino. Thank you 🙏🏼

@SALVATORESAIELLO

6 ай бұрын

i sensori li trovi un po ovunque. ci sto lavorando su come configurarli in modo tale che non si possa spegnere la luce se presente qualcuno sulla scala

@samuelebasso

15 күн бұрын

@@SALVATORESAIELLO Ciao, sei più riuscito a creare lo schema/programma? Grazie mille!

@SALVATORESAIELLO

10 күн бұрын

@@samuelebasso putroppo ci sto lavornado amcora per poter ottimizzare il progetto. Per ora funziona abbastanza bene anche se spesso non rileva o da falso passaggio

@samuelebasso

9 күн бұрын

@@SALVATORESAIELLO Ho capito, ti lascio la mia mail, se per te non è un problema quando hai tempo riusciresti a girarmi la lista del materiale, uno schema elettrico e il codice anche se non è perfetto? Perché chi mi stava facendo questa cosa mi ha abbandonato e ad oggi mi trovo con la scala finita e i muri ancora aperti in attesa del cablaggio 🙈 Grazie mille!

Hi Benni It looks really great. Thank you for your passion and a new Led concept. Would you see any issue to share and upload the Arduino code you used to set this up for demonstration job? Do not worry it is not Perfect. I would appreciate it. Thanks

@andygriggs9801

4 жыл бұрын

Hi Benni It is very imppesive I thought about the logic might have used. It looks 1. The outer sensors take the lead for entry role when you walk up or walk down 2. The inner sensors take a lead for exit points, when you walk out either at the bottom deck or upper deck 3. The interesting point is to calculate how many people are in the middle of the stairs between inner sensors. It looks to me that if the sum if entries are greater than number of exits regardless of whether at upper point or lower point, the strip Led needs to still be turned on. 4. If the number of entires are equal to number of exits- the last exit sensor activated on high either at bottom or upper point dictates from which direction the Led strip should travel and fade out. 5. My understanding is that distance sensors are used only bacause of their accuracy compared to motion sensors. I assume you do measure anything here. Benni please advice if this above description was the logic that you used to set it up? Great thanks

@ITMTS

4 жыл бұрын

Andy Griggs any progress? 😂

Help mi

لوسمحت رقم الهاتف الخاص بكم

I want this product can i call u please

@tinkerfun

4 жыл бұрын

Excuse me, I'm not currently offering it for sale. Best regards from Germany Benni

@rajaramyadav9986

4 жыл бұрын

@@tinkerfun ok but i want this project please help me

Led model name

@tinkerfun

3 жыл бұрын

APA102

hello and nice your project but you see that you don't want to share anything with us. here everyone asks how the project was done but nothing. Then I make a file with a price for the project and you incase the sum as you want it. I do not put anything do not show what you do and so we find tall

@tinkerfun

4 жыл бұрын

So I comment your post on the other video. This project is not final. It is proof of concept. I have not much time but I hope to finish these project soon. But I don't now if I will be make it open source. We will see. I want to inspire all peoples to build self things but it's not my job to make step by step tutorials. With the infos on my website about v1 you can build your own system but you have to program your own code. Best regards Benni

@indianathann1410

3 жыл бұрын

@@tinkerfun 🌷👌👍

Hi sir , can you help me plz 🙏🙏🙏🙏 sir hapl me plz 🙏🙏

Too bad you can't speak I'd like something like that but I'm not going to deal with someone that can't speak

warum diese grauenhafte Musik?

I'm sorry, but I had to dislike for the unnecessarily loud music and excessive camera shake. Other than that this looks nice.

@tinkerfun

3 жыл бұрын

So ok, thanks for your feedback.