Digirig Radio Interface - Baofeng Winlink & CHIRP programming
Ғылым және технология
With the DigiRig, you only need one set of cables for both programming your ham radio, but also running digital modes like Winlink (for email) and running APRS applications.
The DigiRig can be found here: www.gigaparts.com/nsearch/?lp...
Want the best HT antenna? Signal Stuff Signal Stick signalstuff.com/?ref=622 (This is an affliate link)
Support Ham Radio Crash Course Content
Patreon - / hoshnasi (includes monthly newsletter, stickers and Patron perks)
KZread - / hamradiocrashcourse (includes early access to videos, membership YT badge and custom emojis)
Shop HamTactical: www.hamtactical.com
Shop Our Affiliates: hamradiocrashcourse.com/affili...
Shop Our Amazon Store: www.amazon.com/shop/hamradioc...
As an Amazon Associate I earn from qualifying purchases.
Current Shack Config (includes affiliate links)
ICOM 7300: amzn.to/2PKBpmZ
SteppIR 3E Yagi: consumer.steppir.com/shop/hor...
ICOM 2730a: amzn.to/2JqrASg
MFJ-4230DMP: mfjenterprises.com/products/m...
Connect with Ham Radio Crash Course
Website...................► hamradiocrashcourse.com
KZread..................► / hamradiocrashcourse
Twitch......................► / hamradiocrashcourse
Podcast...................► hamradiocrashcourse.podbean.com/
Discord....................► / discord
Facebook................► goo.gl/cv5rEQ
Twitter......................► / hoshnasi
Instagram.................► / hoshnasi
Physical Mail.............►Josh Nass P.O Box 5101 Cerritos, CA 90703-5101
Music by Sonic D:
Soundcloud.com/sncd
Twitter.com/sncd
Facebook.com/djsonicd
#baofeng #hamradio #amateurradio
Пікірлер: 115
The DigiRig can be found here: www.gigaparts.com/nsearch/?lp=JOSH Download universal drivers here: www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
@programmingguy6081
2 жыл бұрын
Thank you for adding the digirig to your list on gigaparts. I did eventually find it. Question, do they sell the cables so you don't have to buy the digirig multiple times and can just use the same one between radios? I think that's a GDP mini laptop if so which model please?
@wild-radio7373
2 жыл бұрын
@@programmingguy6081 yes! The didiRig company website sells them individually and as part of a starter kit♡
@michaelhopwood1022
2 жыл бұрын
What's the brand and model of the laptop you were using? I've been looking for something small to carry around for POTA.
I made my own version of this a long time ago with a cheap3-port USB hub, sound card, and serial adapter. Hacked them all together into a tiny package and it works great with a Pi on my G90. Nice to see a polished product now, but I built mine for 1/5th the price.
I was a very early Digirig user. It's worked flawlessly with my G90. It just works. Glad it's picking up some mainstream attention. I need to pick up the rev 1.8 and some cables for my 891 and baofeng.
I just got my Digirig in and I am going to use it as my Digital Interface with my FT-891! Great little piece of Kit!
Got one from the DigiRig Store with the KX3 cables about 3 weeks ago. Had it up and running on the mac in 10 minutes (figuring out WSJT-X took another 10-20) Love that it's just one USB cable to connect. Note that if you are buying one without cables you may want to make sure you get one set for the right levels for your rig's serial control (though you can always get out the soldering iron and change it)
I can't wait! I am going to my PO box today to pick my digirig up.
I picked up a Digirig 1.6 with Yaesu 8xx cables a couple of months ago, and have loved using it for APRS and packet Winlink with my FT7800r and Linux computer. Getting Direwolf to play nice with the Digirig took a little doing, but now I fire up Pat or Xastir and everything just works. I’ve even used it to start playing with fldigi and MT63 a little.
Great content, as always. I agree having convergent devices and fewer cords is a big win. I'm playing with APRS cables and a very small sound dongle to get the same result, but it's kludgy; I may just go with the digirig.
Great video, I just got licensed and using this video just sent my first Winlink email over radio :) Thanks!
@HamRadioCrashCourse
Жыл бұрын
Congrats!!
Yes!! Exactly the problem I was hoping he'd cover
Perfect. Thanks!
So much better than the now overpriced Signalink's that I used to buy. The owner is a very nice and a responsive fellow Ham too. There are more purchase options on his site too...
Really good info Josh, I'm getting too old for all this Digital stuff. At 68 1/2 my mine gets messed up. I do not have the memory space in my brain to learn more stuff. I have always been an analog person at 42 yrs a ham. Just got to watch these videos over and over. I'm a visual learner myself on most things.
My Dig-Rig arrived about an hour ago...Now to fire up the FT817...
@HamRadioCrashCourse
2 жыл бұрын
Nice!
Great! would any HT that has the K1 connectors work with other brand HT radios with the Baofeng cables?
This probably would be good to use it in my tactical ammo can radio for emergency use
Neat!♡
@wild-radio7373
2 жыл бұрын
I got the g90 set♡
Pretty cool
@HamRadioCrashCourse
2 жыл бұрын
Hey Tom!
Any idea if using the baofeng aprs-k1 cable In place of the digirig cable will work?
The digirig sounds interesting, but I'm a bit confused poking around their website. Are the jumpers inside the actual unit different for different radios where if you use it on an FT-857D, IC7100, and Baefeng HT...not only do you need 3 sets of rig to digirig cables at $30+ a set, but completely different digirigs themselves. Requiring 3 separate $50 units, dedicated to each rig. They also neglect to mention how long the "short" cables are...only mention how long the "standard" ones are. Rather significant oversight. The USB-A to USB-C cable is same design as those on the market right? Nothing devious like different proprietary internal wiring so you have to buy theirs I hope?
Thank you for posting the video on the Digirig unit. I looked through the comments and couldn't find a reference to the soundmodem.exe. I searched for it on the web and the first link that came up was blocked by my AntiVirus software because it was a suspicious link.
I can not for the life of me get this to work. It works great with varaFM but for some reason when using sound modem it will not transmit or it will transmit continuously. Anyone know of anywhere I can find the settings to make this work?
can you do a course on the digirig and the G90?
Which cable do I need for the QYT KT-7900D?
The ONLY tool you own that has only one purpose is called a FIRE EXTINGUISHER. And you keep that in the kitchen, or one on the garage.
@HamRadioCrashCourse
2 жыл бұрын
I have one in the shack, the kitchen, next to my bed, in my car. Big fan!
@toml.8210
2 жыл бұрын
@@HamRadioCrashCourse I'd like to see the water-based foam fire extinguishers fixed, so the use non-toxic agents, because the powdered ones are corrosive and will ruin everything it touches, like your car or stove- or radios!
I am having an issue with a UV5R following this. If I turn off squelch VOX doesn't work and if I turn on squelch it misses the first of the packet. Very frustrating, any ideas?
@HamRadioCrashCourse
2 жыл бұрын
Squelch off means the radio is in non-stop receive and the vox likely won’t come on. Set it to 1. Regarding missing packets. Add some wait time before transmitting.
Just got my Digirig. Spent couple of hours with it the first night and a couple of hours the next morning. Watched your video a few times and still can't seem to connect it using Packet Winlink. Tried copying your settings in SoundModem and Winlink but no luck. I can get it to make 5 tone bursts while attempting nearly every station/channel close by and then it disconnects due to timeout. Even connected to an external antenna. Were there any critical settings on the HT like VOX or Squelch that you had to configure?
@HamRadioCrashCourse
2 жыл бұрын
Is the gateway replying?
@jonathonholladay8057
2 жыл бұрын
I'm having the same issue. For me, the stations that I'm attempting to connect to respond when using a different radio with a built-in TNC. I've been scouring the internet and had no luck in getting the digirig to work with packet Winlink. I'm completely stumped.
@dangermandave67
Жыл бұрын
Same here. My Baofeng/Digirig/Soundmodem combo works perfectly with APRS (using APRSISCE/32 as my client). But I cannot get it to connect to a Winlink node. I got a couple of responses from a RMS node but Winlink won't take 'yes' for an answer and keeps sending connection requests. Frustrating. Reception shouldn't be an issue; I'm sitting atop a hill overlooking the valley where the node is located.
Will this device work with VARA-HF and 9600 baud Winlink? Rod J
What's the sound modem link? And no matter what I'm trying, I can't see the waterfall nor is my baofeng showing its transmitting. Help!
Am I missing somthing? Where is this sound modem link you speak of?
Would this possibly plug into an Iphone or Ipad with the right cable?
I’ll wait for the next generation of all this as this won’t go mainstream until it is more simplified..
@HamRadioCrashCourse
2 жыл бұрын
Idk there will be a next generation. As long as radios have separate serial and audio lines you’ll need to split them up into an interface. Or get an ICOM 705. One wire or wireless.
The website made it seem like if you wanted to use this for APRS or Packet WinLink you needed to change some solder connection on the board. Is this true is it plug & play for that and say Vara HF? How does this compare to the Mobilinkd TNC3?
@HamRadioCrashCourse
2 жыл бұрын
It depends on the radio you want to control. If you have questions. Message them on the DigiRig site.
Any tips for people having connection issues? Most replies I have gotten on winlink forums are pretty much along the lines of: “Those cheap radios take too long to go from TX to RX. Buy a good radio if you want it to work?
@HamRadioCrashCourse
Жыл бұрын
Connection issue to what?
Mine doesn't work. We need a video that shows the installs and settings we need to do for it to work. Considering returning the Digirig and cables back if I cannot get it to work with Winlink.
So I am not seeing the cable savings. IF I had the programming cable for my Yeasu and the audio interface cable for my Yeasu tha'ts 2 cables. It looks like with this, I will have 2 cables to connect to it, and a 3rd cable to connect to my computer. Am I missing something?
@HamRadioCrashCourse
2 жыл бұрын
One connection to computer for both CAT and audio. Which if you’re going with newer smaller devices may only have one port like usb-c
@HamRadioCrashCourse - What is the mini laptop used in this video?
@HamRadioCrashCourse
2 ай бұрын
GPD Pocket 2
You said you were going to put a link for SoundModem, but then you didn't!
@fotografm
13 күн бұрын
Exactly !
Is it possible to setup a ham radio BBS service to connect computers without the internet ?
@HamRadioCrashCourse
2 жыл бұрын
Ham bbs exists. It’s packet radio stations. But it’s all ham radio to ham radio for connection
@devondetroit2529
2 жыл бұрын
@@HamRadioCrashCourse damn that’s cool, see if you can set one up.. that would be an actually useful system in times of internet outage (societal collapse) being able to leave data messages on a bbs and being able for others to retrieve all over the airwaves. I wonder if there is bbs software for it tho? I’m an amateur at all this but I like the idea of that system, would it work with lora perhaps that would be better protocol ?
Have you tried using it for APRS? Seems like it could be a cheaper overall solution than a Signalink
@HamRadioCrashCourse
2 жыл бұрын
Not yet. But it would work.
@shilothompson7672
2 жыл бұрын
My preference for APRS with a Baofeng is the BTECH APRS-K1 cable. For right around $20 it's a nice piece of kit that has served me well. I hope to test drive the Mobilinkd TNC3 in the near future for the added convenience of ditching the comm cable in favor of a more efficient package. 73
I have yet to get the discount code Josh to work :-/
I get wanting to have fewer dongles and cables, but it seems like this just added an extra dongle. Instead of only having two cables, you now have two cables plus a dongle, the opposite of what you wanted to achieve, no?
I guess you had to enable VOX on the Baofeng right ?
@boge2001
7 күн бұрын
Would like confirmation also!
I neeeeeeeeeeed that small laptop you have, where did you get that please let me know
@m4rkm4rk13
2 жыл бұрын
Found it! I didnt hear you say the name lol
Do you need to set the HT to VOX instead of PTT for this to work? Also, I thought that you needed a Digirig specifically set up for the Baofeng (i.e. not one set up for a G90, for instance). I thought I saw a blog post to that effect. Correct me.
@HamRadioCrashCourse
2 жыл бұрын
You vox needed. With the Baofeng cable set it will ptt the radio. You shouldn’t need another Digirig to interface Yaesu, Kenwood or Xiegu radios. Just the unique cables.
@rickroyston
2 жыл бұрын
You do not. Mine that I got yesterday was a 1.8 version
@pbac74
2 жыл бұрын
@@HamRadioCrashCourse I am attempting to configure my FT3D with use with Winlink / Soundmodem / Digirig... I get the waterfall, need help with TX (VOX set to On/LOW). Thoughts ? Suggestions?
@dangermandave67
Жыл бұрын
@@rickroyston You are right. This version does PTT on the Baofeng. Sweet! I just wish getting Winlink working with packet was as simple as it looks in this video. I'm struggling. Setup works great with APRS. Have not yet been able to connect to a Winlink RMS.
@randymaggelet7290
Жыл бұрын
@@pbac74 high
What model Icom and antenna @ 6:22 ??
@HamRadioCrashCourse
2 жыл бұрын
ICOM R30.
I have attempted to connect with a ft 70d (with proper cables). I have absolutely failed. Help!
@HamRadioCrashCourse
Жыл бұрын
I’d reach out to the creator. I don’t have an ft70
What's the difference Between this device and the Digilink Nano?
@HamRadioCrashCourse
2 жыл бұрын
Looks to be similar devices.
There is a bluetooth programming interface for the BF, TidRadio, etc.
@HamRadioCrashCourse
2 жыл бұрын
I’ve reviewed the Bt unit. Fine unit. Horrible app. It doesn’t do audio control though for working Winlink like the Digirig does.
@toml.8210
2 жыл бұрын
@@HamRadioCrashCourse Notarubikon thinks it's a great thing. I'm traditional, so I'm used to the old ways.
I don't understand why you would use a Digirig to program a Baofeng with Chirp. There are lots of USB to Kenwood cables that work fine.
@HamRadioCrashCourse
2 жыл бұрын
One cable. It can program the radio and work digital modes. It’s like a signal link and Ftdi cable.
Hey man you need to set your camera focus to manual to keep it from hunting. Lots of it going on at the start of this episode.
@HamRadioCrashCourse
2 жыл бұрын
Thanks. It was some odd setting from after Hamcation. Setting focus alone is kind of a pain, I’m sure you understand.
@rpestess
2 жыл бұрын
@@HamRadioCrashCourse no problem, I shoot video for a living so I know how tough it can be!
I got the Digirig Cable for my Yaesu HT and Denis from Digirig told me that I cannot use it for programming my Yaesu HT with chirp, which is a huge disappointment.
How might someone intercept your emails sent thru this? I know its not encrypted, but how unsecure is it really?
@paulwolf8510
2 жыл бұрын
Anyone with a radio and the inclination. Treat it like you would with phone. Nothing you would t be ok saying in public. There are other secure emails. I guess you get some security through obscurity but not enough for sensitive stuff
@chumslice6170
2 жыл бұрын
@@paulwolf8510 Could you send encrypted files (text documents) that the intended recipient could then decode?
@HamRadioCrashCourse
2 жыл бұрын
Hypothetically yes, but not legal.
@paulwolf8510
2 жыл бұрын
@@HamRadioCrashCourse what Josh said
Can you do this with a UV-9G?
@HamRadioCrashCourse
2 жыл бұрын
If the cable is the same, yes.
@FredrickLeicht
2 жыл бұрын
@@HamRadioCrashCourse sweet thanks
work with digipi?
@HamRadioCrashCourse
2 жыл бұрын
It likely will, yes.
What type laptop is that ?
@HamRadioCrashCourse
Жыл бұрын
GPD Pocket 2
I just "happen" to have a blank B(word) that I can dedicate to this. I also have as older small windows 7 computer I can dedicate for this. It will be my first move away from voice.
@HamRadioCrashCourse
Жыл бұрын
Nice!
What is the difference between this and the Mobi?
@HamRadioCrashCourse
2 жыл бұрын
Mobilink is a kiss TNC and wireless over Bluetooth.
@KD2MIC
2 жыл бұрын
@@HamRadioCrashCourse and the digirig is just a means to connect radio to other hardware?
@HamRadioCrashCourse
2 жыл бұрын
It’s a serial and audio interface over one usb wire to the computer.
` . ♥️
please turn off autofocus. I love your videos.
@HamRadioCrashCourse
2 жыл бұрын
Thanks. Blame it on Hamcation. I had some odd configs there and messed something up. It’s all fixed now. 😬
@johnnymp4827
2 жыл бұрын
@@HamRadioCrashCourse wanted to say I got LoRa boards thanks to your vid on it. Im excited to set it up tomorrow!
Ugh… the auto focus… wtf…
What is the laptop? 73 de KK7IWW