Top 6 Tips For Digital HF Ham Radio, WSJT-X, FT8, JS8CALL
Here are my top tips on running HF digital modes like FT8 and JS8CALL. However they were work in most situations for other modes. Let me know what you think in the comments! What other tips would you add?
Time Source: dimension-4.en...
GridTracker by N0TTY: tagloomis.com/
Monthly newsletter, stickers, private content:
/ hoshnasi
Links to products in the video: www.amazon.com...
As an Amazon Associate I earn from qualifying purchases.
Current Shack Config:
ICOM 7300: amzn.to/2sVdpOq
ICOM 2730a: amzn.to/2JqrASg
MFJ-4230DMP: www.mfjenterpri...
G5RV: amzn.to/2KfETGv
Souncloud................► / hoshnasi
Discord.....................► / discord
Facebook.................►goo.gl/cv5rEQ
Twitter......................► / hoshnasi
Instagram.................► / hoshnasi
SnapChat..................► @Hoshnasi
Music by Sonic D:
Soundcloud.com/sncd
Twitter.com/sncd
Facebook.com/djsonicd
Companies can send demo products to: Josh Nass P.O Box 5101 Cerritos, Ca. 90703-5101
Пікірлер: 169
Tip #1: Murphy's Law of digital modes - As soon as you choose a clear lane, someone else's signal will appear under it immediately.
I always operated at low power because that's what everyone said to do. I cranked it up to 100 watts and I instantly begin getting calls from Europe. I fell into group think. Thanks for the advice!
Josh, good video and I hope that lots of FT8 ops watch this. I have been using digi modes for years and reckon this is all very good advice. Some things I might have added is: 1. Please make sure your computer system sounds are disabled. This prevents you transmitting all your operating system sounds. 2 Do try to avoid operating FT8 by just holding your mic in front of your PC speaker. This prevents you obliterating the whole FT8 frequency with background noise. On the subject of power, the unwritten rule in the olden days of JT modes (before FT8!) was that anything above maybe 30-35W was frowned upon. I guess this has all changed a bit now. However, I do sometimes wish there were separate FT8 QRP frequencies. All too often, DX or the low power signals are just swamped by ops running unnecessary amounts of power.
@AA5SA
4 жыл бұрын
Steve GM0HUU really there’s an art to it. I’ve found the best way is to watch the signal reports you’re sending and receiving, if you’re giving out -17s and getting +22 consistently (seriously saw that on 20m day before yesterday) then you probably need to turn it down. A lot. Also, like I said in a comment above, turn down the RF gain on your receiver. K1JT recommends you reduce the gain until a clear frequency reads 30 dB in the program’s meter. That usually means my S-meter is reading S9+10 dB on my TS-590SG. Putting more signal into the computer doesn’t improve the SNR for weak stations, but it does drastically reduce the dynamic range.
Josh, regarding the issue with operators staying in their lanes I'd suggest someone either approach Joe Taylor and the WSJT-X team to implement "snap to grid" functionality when changing transmit frequencies or somebody in the community creates a patch for the functionality to be included in the next release of WSJT-X.
@HamRadioCrashCourse
4 жыл бұрын
Great idea.
@Steve-GM0HUU
4 жыл бұрын
This would be a good idea. However, not sure how well it would work unless all FT8 operators have their transcievers very accurately calibrated?
@DJChrisArgueta
4 жыл бұрын
@Karl Laun, you must be a DJ or a dance music producer. Only they would understand "snap to grid", LOL. Regardless, great advice, I thought the same thing. I think the RX and TX should be channelized.
@Pelnied
3 жыл бұрын
@@DJChrisArgueta there's plenty of references to "snap to grid" that aren't related to quantizing music notes, like placing icons on your desktop or editing photos.
@haroldgretzky8757
Жыл бұрын
@@DJChrisArgueta Snap to grid is used in CAD software such as Autocad
I've been using FT8 pretty successfully for over a year and this video still helped a ton, thank you sir!
In your 10 minute vid, you went over what i had to learn on my own in 6 months. Thank you VE3XET
@alfredowestley3210
3 жыл бұрын
I dont mean to be off topic but does someone know of a trick to log back into an Instagram account..? I somehow lost the login password. I love any tricks you can offer me
@korbinkingsley7957
3 жыл бұрын
@Alfredo Westley Instablaster :)
@alfredowestley3210
3 жыл бұрын
@Korbin Kingsley Thanks so much for your reply. I got to the site thru google and Im in the hacking process atm. Takes a while so I will get back to you later with my results.
@alfredowestley3210
3 жыл бұрын
@Korbin Kingsley it did the trick and I now got access to my account again. I am so happy! Thanks so much, you saved my account !
@korbinkingsley7957
3 жыл бұрын
@Alfredo Westley glad I could help :)
Excellent! I've been using FT8 now for 6 months and I am still learning tips. Thanks!
Thank you, I really like using FT8 and these tips are great. Huge improvement in ops.
Top notch video production with excellent tip! Great timing, too. I just started playing with WSJT-X and FT-8 this week.
@HamRadioCrashCourse
4 жыл бұрын
Thanks for watching.
Thank you for your on-point tips! As a result, I reduced my ALC from 100% drive to your recommendation. Next, reset my AGC to fast as recommended. Finished up with a note for Grid Tracker. Great information, great channel! 73.
Great video! Your the first guy that I have heard say running a little more power is OK. I always felt the same as higher power can still mean a weak signal at a DX station. Another trick is if I have a weak DX station at 1,500 hz, or lower, I reduce the receiver bandwidth. I normally have it set for 3000 for FT8, but if I can half the bandwidth still leaving the DX in the passband, I have greatly improved the signal to noise ratio. I have seen weak stations come up 3db or more.
Been using Grid Tracker since last November. Love this software.
We all have the same look during this COVID lockdown. LOL 😁💇♂️
Josh, this is FANTASTIC and required viewing. The only thing I'd add is move to another open lane if no one responds. I've found sometimes my lane is open but the corresponding lane in DX land isn't, so I get stepped on (CB talk) THANKS for all you do!! De WO8USA🇺🇸🇺🇸🇺🇸
Once again you help me out, been trying to get that elusive state of Hawaii, followed your advice and tighten my game up tonight, got Hawaii and Oceania jus need to get AK now. Thanks for the help
@HamRadioCrashCourse
4 жыл бұрын
Wow! That is great to hear! Congrats!
@markh1938
4 жыл бұрын
And I bagged the most elusive for me AK Monday night, he made me work for it but it was worth it. Got all 50 now most digital so now I guess it’s time to get them with phone. Regardless you helped, glad I found your channel
Xiegu g90 users are looking for ALC 100%. For some reason they program their ALC indicator exactly the opposite of most other radios. Thanks for the tips.
Really nice you put up this video. I’m going to get a ts-590s (not sg) this weekend to replace the ts-440 I have. And I wanted to setup my iMac with it for FT8 and psk. These are some really nice starting tips.
Came back to this one as I am just getting set up for HF digital modes. Thanks for the tips, got some more apps to download.
Hey Josh. Greetings from Brazil! Man this is amazing. FT-8 is really increadible. Although I don't have a license (yet) I was receiving these signals in my SDR and couldn't figure the type of signal I was receving. They were showing up in several bands. When I saw your video on WSJT-X it simply opened a huge door into these signals. I can now read tons of QSO's that I didn't realize what they actually were. This is helping me to learn more and more on amateur radio. Getting prepared for getting my license soon I hope! Thanks! Kind regards.
Thanks Josh! .. Just started FT8 yesterday. After making a few adjustments you suggested in this video I made contacts in Hawaii, Australia, and Africa (from FL).
@HamRadioCrashCourse
2 жыл бұрын
Heck yeah!!
@mattb4rd
2 жыл бұрын
@@HamRadioCrashCourse And Fiji and Japan this morning! And I'm not allergic to bees!
Very helpful - my upgraded old win10 laptop was running over a second off. Dimension 4 is pretty slick!
Thanks for the great tips Josh. My AGC was set for MID so I changed it to FAST, and then FAST Off. Even adjusting the computer microphone settings and the Power in WSJT-X to where it appeared it should work fine, signals just disappeared. I then switched the AGC to FAST 0.1s, reset the microphone and power settings and it seems better.
The Mountain Man look is working for you. Enjoy your channel.
@HamRadioCrashCourse
4 жыл бұрын
Haha thanks.
Yet another great video Josh thanks for the tips.
How timely. I was working FT8 as a new ham and these tips greatly increased my QSOs. Thanks!
@HamRadioCrashCourse
4 жыл бұрын
Awesome! I am glad it helped!
Good video and tips. 1. Use HOLD TX FREQ!!! Wish it was a defaulted method. I get many many people calling me on my freq. Never heard about the zipper method being bad, so something to watch. 2. Time: another good program is BKTTimeSync (i likeit it better than Dimension 4). 3. For AGC, I stuck with FAST (too distorted with 0 agc). 4. Power: For no amp, I set me radio to 100w or whatever and then use the slider for power output, for amp, I set the radio to low and find the right balance. 5. JTALert is another option for GridTracker, can use them both with multi-cast (I use Ham Radio Deluxe to control my radio). Nice job again on the video and tips. Everyone just has to find what works best for them! 73. KL7TC
I have seen guys running massive alc, wiping half the transmit area. Most likely full legal limit with all the dials turned to the right.
@felsenruh
3 жыл бұрын
Or to translate into English: they had their amps turned to 11.
Great Video Josh! One of your tips, ALC is universal across all modes. I prefer lower power myself and sold my AMP 25 years ago due to neighbors knocking on my door when I used it.... :) 73
Per my last email, I’ve been trying ft8 a few days now. I’ll try these tips to hopefully make my 1st ft8 contact. I didn’t know about the 50 hz steps.
@HamRadioCrashCourse
2 ай бұрын
Awesome! Hope it helps!
Thank you for the great video!
I just got into digital so this was really helpful! Thank you for this simple but yet informative video! It is much appreciated! 73
@HamRadioCrashCourse
2 жыл бұрын
Thanks for watching!
Great tips Josh, I will have to make one or two changes to my setup. Also need to get Grid Tracker, looks good. 73 - n2imb
Josh, I had forgotten about how to turn off the AGC on the 7300 (and now my 705), until I watched this video. I had been tapping through the three AGC settings thinking there was a Off setting as well. After watching this video I gave it a try on my 7300. I was listening to a local AM broadcast station at the time and I was greeted with very loud audio when I dialed the AGC to Off. I will turn off the AGC next time I do FT8. 73, Ned, N8OIF
Free just happens to be my favorite price. Good best practices in this video! Especially holding TX frequency on an empty part of the waterfall. 73 - KC1OCA
Great video ! Thanks ! I’m gonna get dimension 4 asap !
Adjust your ALC as low as it will go while still putting out full power. And turn your RF gain down!
Thanks, great video!
Hey Josh - great video. I am about 10 days away from being on the air again after 27yrs off. Can't wait to work these new digital modes. Do you have tips or similar as it relates to Windows 10 to insure everything plays nice? Regardless, keep 'em coming! 73...
Okay, I finally found Dave Casler's video that really explains FT8 and others. I did EME in 1978 with voice only and that was something. I'm sorry but to me, if you don't pick up a mic and talk to someone it is really something other than HAM radio. I already know what you are going to say but at 80 I am too old to change now and I have no interest at all in digital radio other than maybe DRM which I am going to try soon and without the dam Windows stuff. Sorry, I don't mean to piss you off which I guess I have. You do great stuff for the most part and thanks for all you do.
@HamRadioCrashCourse
4 жыл бұрын
I’m not mad. But I do think your implications that digital modes over radio isn’t real radio is a bad thing to throw around. You may have personal preferences, but it does not help ham radio to cast those preferences on others to invalidate when you don’t prefer.
@sfrahm1
4 жыл бұрын
The humanity of voice is great, but with the crappy band conditions digital modes are a nice way to explore and get a feel for the physics you are manipulating with your rig and antenna(s) I just got licensed in the hobby a few years ago now. 73
Thank you for sharing the nice tips
Great tips!! I do like the various other software like Grid Tracker, I need to download that. I wonder if it can be used on a Raspberry Pi. I have been following Jason, KM4ACK and I am using his Build A Pi script and I use a Raspberry Pi 3b Plus with my Yaesu FT-871ND and Signalink to do digital modes like FT8, JS8Call and Winlink. I would love to add that Grid Tracker to the Pi, but not sure if it compatible with the Pi. I have made lots of contacts with FT8 and enjoy setting down and trying to catch those DX stations. I also run it on my Windows 10 computer and my Yaesu FT-757GX with a homebrewed soundcard interface I built back in the early 2000's before I left the hobby. When I left the hobby PSK31 was the new digital mode on the block, when I came back into the hobby in 2017 the craze has been the FT8. I generally keep my operating on FT8 when on the 757 down to about 25 watts, but I have also been known to pump up the wattage to 100 watts to work that DX station. Don't have an amplifier, sold that when I got out of the hobby in 2006, sold all my gear! Wish I would of just placed it in storage or something. You have some really interesting videos and I have been a subscriber for a long time. Keep up the good work. 73 de Juddie WD8WV
@rttakezo2000
4 жыл бұрын
Yuppers, Gridtracker works nicely on my Pi
Thank you for the tips! On my IC-7000, when I turned AGC all the way down, the noise coming out of the audio is overwhelming, so I would prefer the tunes and set it at 0.1ms.
@HamRadioCrashCourse
3 жыл бұрын
I'm glad it helped. Remember, if you have the audio going into your computer, you don't need to listen to the speaker. I generally have mine off and just use the meters to tell me it is working.
@twong689
3 жыл бұрын
@@HamRadioCrashCourse I did the same. I only turn the audio monitor on ad-hoc.
When you say digital HF, I am thinking of digital HF phone. I don;t think an ham radio companies are working on this mode?? I don't know why. Digital HF phone will go below the noise floor and reproduce the audio like a good cell phone connection. Great FM-like quality audio; no noise? That is the mode to talk about! Wanna hear what good digital HF sounds like? Check our the Barrett HF demonstration video. The Barrett is now made in the US. It was designed by Ebitt Systems; the one which made the famous Motorola Micom radios. We need this form of digital incorporated in all ham HF radios if they can come together on the encryption code that they are willing to give to the public without a license fee. I guess this is the hold-up for development.
With JS8CALL right now, you will get much more bang for your buck. You'll have a little more to learn because there are many more features. But, being able to converse with people so far away is amazing. Give it a try. Oh, and one thing it does is give you four speeds. Believe it or not EVERYONE regardless of what speed they are is decoded by every other station. So, someone could have set up in "slow" and a turbo station could come on and their station would decode it ! Hopefully it stays a little quite as I love conversing with my friends in the Philippines, South Africa, Australia , and Japan. Oh, and just missed a conversation this am with Indonesia ! See you on JS8CALL N6GRG
@sfrahm1
4 жыл бұрын
Just went back to working to master FT8 first, JS8call was a bit of a large chunk of tech to begin with. This video answered most of my remaining questions so I should be comfortable with both soon.
Hi @Ham Radio Crash Course Is it possible for me to run FT8 on my kpo dx5000 10m radio. Is there an interface I can use for this radio? I run an Icom IC7300 at home with WSJT-X but would like to setup on my 10m radio when not at home. The KPO has external speaker however I'm guessing the microphone / tx will be an issue. Any ideas?
Great video. Will help a lot for sure. S21OD
Josh, I can't help it. It's cuz your're such a great guy that I do this! I'm serious! lol. But silly Josh, everyone knows that, and it's been proven in video, 'FT-anything SUCKS - and is RUINING ham radio for CW ops!' Thanks for all your awesome, fun and informative vids. 73 OM
@HamRadioCrashCourse
4 жыл бұрын
Ft8 doesn’t prevent people from using cw. 👍
@sfrahm1
4 жыл бұрын
@@HamRadioCrashCourse Hahaha. Gonna play with CW next, after getting the hang of JS8call and getting better at FT8, which this video is invaluable to both.
me with an IC 718, but by the end of the semester I will have an IC7100
I use nettime
Fun fun. I have to chose between no bars on alc or 4 bars on my 7300. My laptop jumps that much on a single numerical value.
@sfrahm1
4 жыл бұрын
Tweak the audio level on the 7300 end a bit instead?
I want to send CQ for a specific Country. I have tried creating a macro, or just enter in one of the 6 lines on the bottom right. When I do this I get this symbol "" with CQ_XXX in between the brackets. I can't seen to find any info in how do you do this correctly. I can see others who are doing it on my screen. I will give you the exact example. Give me an example how to type in CQ P43 xxxx FN41 xxxx would be callsign
Thanks for the tips a lot of it I knew but there was a few I didn’t so I’m gonna put that into practice. 73 WD5ENH Steve
I use my iPhone for ft8 is the time on my phone good enough or should I use something else for the time?
@HamRadioCrashCourse
5 ай бұрын
Time on your phone should be great.
Question, how do I force windows to dedicate and not re-address my win10 workstation's 2 physical serial ports so I can connect both the CAT and the rigblaster
Regarding ALC. I was under the impression the correct level for transmission was meant to be to be where the red line under the ALC meter stops.. On my radio if it the ALC was barely registering, my radio doesn't transmit at the power I set.
@HamRadioCrashCourse
4 жыл бұрын
Correct it will depend on the radio. On the 7400 the red line is MASSIVE. in my experience, keeping it on the low side of that bar works well.
@CoriHaws
4 жыл бұрын
@@HamRadioCrashCourse Thanks for the clarifying things!
How long can you operate without access to the internet to synchronise your timing?
Josh, this is great. I've been looking for some extra tips on how to set things up - fortunately, it looks like I picked up a LOT of this stuff from watching your Gridtracker video and RTFM when I set up FT8. I want to ask about power output though - you use 100 watts? I've heard a lot of opinions about what the duty cycle is and how high the power should or shouldn't be set with relation to, for instance, max AM carrier on a radio. So I have to ask, what's the max AM carrier your radio is capable of? If you had a 991a would you go ahead and crank to 100 watts for FT8? (PS: I'm actually watching this because it came up in my JS8Call search.)
@WestCoastMole
2 жыл бұрын
When Joe Taylor developed the WSJT/FT8 protocol he recommended that an output power of 50 Watts be observed. 100 Watts of Power s 3 db above that level. 1000 Watts is 13 db above a 50 Watt signal, and totally unnecessary. Running that kind of power on FT8 overloads the receiver's front-end. The 'trick' NAZ employs in Tip 4 to shutdown the receiver's AGC shows the stations in the receiving passband are using excessive power. Unfortunately FT8 like every other mode of transmission relies on the Honor System. Running excessive power destroys FT8's capability to discern weak signals. And this brings us to Tip 5 where the Video Producer attempts to create a rationalization for running excessive power. Weak signal work was the reason Joe Taylor created JTDX series digital protocols but now that we see FT8 exploding in popularity in come the ethos to run more power. The Video Producer explains away this propensity by labeling his line of thought as that of "Philosophy". Well here is 97.313 Part A verbatim 97.313 (a) An amateur station must use the minimum transmitter power necessary to carry out the desired communications. Then declares his "NEED" to run such power. More often than not this kid of "thinking" morphs into "when all else fails turn up the juice". Drew you need to be very careful what you view on You Tube. And you are wise to call into question such a blatant disregard for Part 97 Regulations. A large percentage of Video Producers spend their time making these video so they can monetize them. You Tube accepts all comers regardless of what their qualifications are.
Much prefer JTDX. You can set it to not keep calling a station if he answered someone else.
@HamRadioCrashCourse
4 жыл бұрын
Wsjtx does the same. 🤷🏼♀️
@raylowe3324
4 жыл бұрын
@@HamRadioCrashCourse wsjtx keeps calling until the watchdog timer runs out.
thanks.
I enjoyed the video. Any thoughts on setting ALC levels for the FT-991A. Thanks
@MrEtmedic
4 жыл бұрын
TH I have the same rig, I reduce it to 60 in the audio software settings VE3XET
@gentleb
4 жыл бұрын
it's adjusted with the DT GAIN on the radio and PWR slide in WSJT-X
Is Grid Tracker good on the Raspberry Pi, or what does it work on? I am new and looking for information like you give. I hope get my first HF radio soon, IC7300. Want to have a Pi do much of the heavy work, so my laptop will not be working the radio all the time.
Hi Josh, This has probably been asked many times, but what logger do you use when clicking the log contact in FT8? I enjoy all your videos. Stay safe. 73 WB3BJU
@HamRadioCrashCourse
4 жыл бұрын
N3fjp. I have made videos on logging.
So K1JT should make the WSJT-X install auto open and play this video
@sfrahm1
4 жыл бұрын
Lulz, my first thought after just watching Josh's video here for the first time. Watching it again for what I didn't fully grok the first time.
I'm curious if anyone has connected a Kenwood TS-850 to a Raspberry Pi for WSJT-X work. If so, can you share the specific cables that worked.
Thanks for the tips... I'm at Day 1 re learning something about FT8. Tip#1: what if there are no empty lanes? Are you out-of-luck (for the time being)?
@HamRadioCrashCourse
3 жыл бұрын
Well first things first! Congrats on having an antenna and radio setup that is pulling in a lot of signals. Second, generally yes, wait for an open lane.
Have you tried JTAlert? GridTracker seems much more comprehensive.
@HamRadioCrashCourse
4 жыл бұрын
I used both.
@brianbgarber
4 жыл бұрын
@@HamRadioCrashCourse Past tense or present? (Sorry, I wanted to see if you have a preference or still use both.)
@HamRadioCrashCourse
4 жыл бұрын
I prefer grid tracker.
@ScottCato
4 жыл бұрын
@@HamRadioCrashCourse If you have only usee JT Alert will that data sync over to Grid Tracker?
ALC on the 7100 and 7300 will clip if it's over the red bar, so you're fine in that space, if you're only using the bottom, you're not gonna use the whole power :)
@HamRadioCrashCourse
4 жыл бұрын
I don’t believe that is true.
@TheMaximilli
4 жыл бұрын
@@HamRadioCrashCourse I stand correct, the ICOM manual states 30-50% ALC.
@TheMaximilli
4 жыл бұрын
@@HamRadioCrashCourse And the IC-7100 manual states to stay within the ALC bar.
@HamRadioCrashCourse
4 жыл бұрын
That doesn’t imply having the alc set low is reducing your power. 🤷🏼♀️ it just says stay in the red.
@TheMaximilli
4 жыл бұрын
@@HamRadioCrashCourse As far as i understand it, it's the input level for the finals, i coupd be wrong though!
Josh You are the best! Thanks for the tips! KE5FAR
I just started on ft8 using my Icom 7610 and an old thinkpad I had running windows 7. I finally got all the settings lined out and the computer and radio talking to each other, correct driver and all was well, I made a dozen contacts then it gave me a small box that said the sound from the usb stopped, then gives me a rig control error. I’ve uninstalled and reinstalled the driver from Icom, it will sometimes start to work then stop, and sometimes never work at all. Can anyone help me with this? It all started after hitting the tune button in wsjtx, now that I’m thinking about it.
@HamRadioCrashCourse
2 жыл бұрын
It’s like RF that is getting into the box or your laptop. Consider moving things around and deploying ferrites on all the cords into and out of the box and computer.
@micahhaislett1863
2 жыл бұрын
@@HamRadioCrashCourse the me for the reply, I will give all of this a try, 👍🏻
I have my general and have never done a HF contact yet. I do not have anyone I know to help me so lots of Newbie questions. What software is that your running? I have a KX3 rig and just got an end fed antenna to try it with.
@sfrahm1
4 жыл бұрын
WSJT-X is the software, FT8 is the most popular mode that it can do. Watch lots of videos, play with the tech, watch more vids to answer the questions that come up. That's what I'm doing here brand new to the hobby myself.
@sfrahm1
4 жыл бұрын
I also joined Josh's Discord server, lots of helpful folks on there all helping each other learn.
In your FT8Man Video, ALC was set on 891 to about 50% of the "limit" Should all radio users try to get as low as possible on the ALC? Or is middle of "range" work?
@HamRadioCrashCourse
4 жыл бұрын
It will depend on the radio. Consult your manual in the case of the alc.
When the band gets super busy and I can't really pick out a lane I like to disable the "hold Tx" option and just chase CQs. That way I should always land on an empty space where the caller was transmitting. In this mode it is important to remember to not try calling CQ myself right away as I'll be stepping on the last person I had a QSO with if they immediately start calling again.
I am researching ft8 and not a user yet. My Elmer strongly advises me that ft8 is full duty cycle and only low power should be used or you can burn up your radio. Based upon his comments I reviewed your video again and did note that you pointed out to watch the ACL and temperature gauge. I am not aware of a temperature gauge on my rig. External device? Anyway, he said a club member burnt up his rig using too much power on ft8. As a novice General Class that scared me. Your further thoughts?
@HamRadioCrashCourse
2 жыл бұрын
It depends on the radio. Newer radios have little issues with the mode.
Can you or anyone on here tell me why the PTT won’t work on frs or gmrs? Even if it’s on simplex when I press the PTT it says error? is there a setting I need to do? I am using the yaesu ft-3dr
@sdritzi
4 жыл бұрын
The FT-3DR will only transmit on Two Meters and 70 Centimeters. It will, however, receive FRS and GMRS
As a tech what digital modes could I use on 10m?
I haven't used these modes yet, I really don't thing I want to. Guess I'm old school.
Thank you 2E0UMF
This is a great video. I have been surfing around looking on how to set the top slide bandwidth on the wsjtx waterfall to 3000 hz like yours. I saw you show a guy on an other video showing him how to set the tx freq and widen the 891 width setting to 3000 and that was nice but I cannot figure out how to set up the waterfall to show exactly the frequency that I have on the radio. I would love to figure this out. I know it's possible as I see it is at 3000 on this video and one other of the guys it was at 4000 so I know I am missing something. I have clicked around all the settings and my mouse is loosing his mind. Can you give me a tip? Maybe managing the waterfall and all you see is another video ha ha. Thanks for all the video's you do. DE KB7CQ
Josh, how do your tips apply to PSK31?
The problem with Windows time after some research. Windows has an internal ability to sync to an NTP server. This is a good thing in theory.... in practise it doesn't do a damn thing whether running a default or custom NTP server. In windows there is a scheduled task to sync time.... this does NOT actually sync time... it just checks the time service is running, the very same time service that sits on it's ass doing nothing. This has been an issue since at least Windows XP This issue is compounded by having an inaccurate RTC on board. So ultimately Microsoft have included a method of syncing... it's just it sometimes syncs as rarely as once or twice a year.
I stay in the 50 Hz window but no one else does. I very rarely see anyone that is transmitting within 50 Hz increments.
FT8 a lot monitor not moving upon transmission, why. Hear great occasional contact
@HamRadioCrashCourse
Жыл бұрын
Sync your time source using Dimension4 on your pc
Have you used build a pi?
@HamRadioCrashCourse
2 жыл бұрын
Yep. Made video on it too.
Yes, yes, yes, yes, no,yes.
Getting your General license is very hard. I have no knowledge on digital and being i guess old timer I am into voice not digital. I want to make contacts using voice. Not everyone is into digital and have no idea as to why its being forced onto us.. There not much info on KZread at all on enough data to help you with the general test!!
Why are they scewing up ham radio wit FT8
@HamRadioCrashCourse
2 жыл бұрын
It’s not screwing anything up. Everything is fine.
@11:24 "Eggcentra" ???
Do you need to be online to use Grid Tracker ?
@HamRadioCrashCourse
Жыл бұрын
To populate the map, yes. Those all spots and need to be downloaded. The lost of contacts will still work though.
@MrJimmy440
Жыл бұрын
@@HamRadioCrashCourse I do,all my HF from the car, HOA sit here.
I'm sure what you were talking about her made sense to many but I lot you in the first 20 seconds. I don't even know what FT8 is or what it does or what it is for. I love your videos but on this one, I feel like a high school freshman that walked into s college senior class. Yes, I know I am just now coming back into HAM radio having been gone for 40 years. Keep up the good work but this one totally lost me. 73 KH6JMK
@HamRadioCrashCourse
4 жыл бұрын
I linked to my video explains how to use ft8 in the video via the cards.
Lets talk about digital phone???
Tip #7 for FT8...USE THE BLOOMING WATERFALL! Tired of DQRM from idiot operators that just TX anywhere! sort it out! DX Code still applies.
@HamRadioCrashCourse
4 жыл бұрын
That was tip #1 🤣
Well dimension 4 won’t download.
Geez, no wonder I can't make contacts if there folks out there running 100 watts! Good God no Amps needed for Digital modes. Of course if lives depend on the communication go for it. That's why I quit DX chasing years ago. 100 watts can't compete, DX isn't fun anymore. Sad..
@HamRadioCrashCourse
3 жыл бұрын
People running 100 watts doesn’t affect you.
Sad really not real radio
And disable your microphone!
Is not a ham radio! It’s a 21 century CB. Digital ... ????
@HamRadioCrashCourse
4 жыл бұрын
I think you’re a bit uneducated on what hf digital is.