Link to the Tank STLs: knarbmakes.itch.io/battleborn-class-battle-tank www.myminifactory.com/object/3d-print-battleborn-class-battle-tank-200551

@helpmepls7154

Жыл бұрын

Hey man, you got the STL Files for that baneblade? I would love to have it as I am just getting into 3d printing because my work allows us unlimited free access to their 3d printers, on the weekends only) A link would be much appreciated!

@chasefoggin8233

Жыл бұрын

@@helpmepls7154 bump

@chasefoggin8233

Жыл бұрын

Did you ever find it?

@TheKurfer

10 ай бұрын

He has not replied to any requests, my guess is that GW slapped him hard for it. lol@@helpmepls7154

My son printed a Lehman Russ Proxy on our Ender 3. If he doesn't say anything, no one notices it's a proxy, even when it's right next to his official model. I've also printed several miniatures with FDM, and gotten amazing results. The keys are to use thin layers, and slow speed. It does take more time, but it's not a race. Now if I can just convince my wife we need a resin printer, too...

@shawnmcandrew6923

2 жыл бұрын

Exactly. If you have an Independent dual extruder printer you can do two at the same time if they both fit on the build plate. It's about creativity and also affordability GW is insane with their pricing.

@nicolaspaglione

2 жыл бұрын

Show her the math of how much money you can save

@2kidsnosleep

2 жыл бұрын

better to ask forgiveness than permission...an age old saying:) I bought my SLA when on sale on Amazon recently and now want a FDM unit as well.

@dredgewalker

2 жыл бұрын

I went ahead and bought a resin printer cause I know it will get a lot of use for my prototyping of smaller more detailed parts that my fdm is having a hard time doing. There are far more options right now for resin printers and the price is actually far below than the more expensive fdms. I love my fdm's but there are models I need to print with high detail.

@DarrenMalin

2 жыл бұрын

my wife reversed into my car on the drive. I shamelessly used the 'pain' to guilt her into getting a resin printer. As the song says 'love is a battle field !' lol :)

I got into 3d printing for small stuff that I didn't bother or couldn't make in wood (laptop stands, phone stands, keychains, flower pots, weather vanes for boats) then I found out about 40k and started printing tanks. I don't even play I just love the design and painting them

@justicedemocrat9357

2 жыл бұрын

Omg I don't care about your lifestory

@stonerayven2455

2 жыл бұрын

@@justicedemocrat9357 Is that the best troll you got? I got over that method 6 years ago LOL

@justicedemocrat9357

2 жыл бұрын

@@stonerayven2455 You're not worth even a shit troll job.

@justicedemocrat9357

2 жыл бұрын

@@ignaciasd1198 Go to bed, kid.

@ernestopoisota9918

2 жыл бұрын

Thats cool, i got a ender 3 and started experimenting and lately ive been dabbing into miniatures too even when i dont play but i still have problems with little prints, specially if they are detailed

Both FDM and Resin serve well. Use good quality filament and a good profile such as Fatdragon and you will come out with amazing results. FDM for large scale objects and Terrain. Resin for miniatures and detailed models. Combinations of both gives amazing finishing products.

@nanowar1192

3 жыл бұрын

Can you recommended what filament work great? I looking to buy a ender 3 v2 soon.

@BlueArrowII

3 жыл бұрын

@@nanowar1192I use NEEMA EVO line from Netherlands, works great and has large variety of colors

@amaurythewarrior

3 жыл бұрын

but then you need 2... now, I'm wondering, since filament is cheaper, is the money you save by using filament enough to justify getting 2 printers?

@BlueArrowII

3 жыл бұрын

@@amaurythewarrior Sure it is.

@oliverwithers9736

2 жыл бұрын

@@amaurythewarrior the issue is filament is that much cheaper and you tend to get a little bit more out of resin.

This was a great video, Knarb. Great job showing the value of good orientation - and really great work with those tanks!

@KnarbMakes

3 жыл бұрын

Thanks Danny!

I love how I got this in my feed after the whole GW+ stuff

I've just got into 3d printing and I'm having a blast. I really think it shines when you use it like you are in this video with mixed medium builds.

@KnarbMakes

3 жыл бұрын

Gotta use the best tool for the right piece, then mix it all together! Gets the best results.

Excellent review. Thank you!

That was some fantastic work on the tanks!

Both technologies are complementary, one picks up where the other one leaves off. I personally have no use for a resin printer and the increased resolution, but I find something to print out of PLA or TPU almost every day.

@edstar83

3 жыл бұрын

Exactly. SLA printers compliment FDM printers they don't replace them. Plus I've been 3D printing for years and I never get bored of watching an FDM printer at work.

@yannickg6904

3 жыл бұрын

@@edstar83 I don't even want to know how much time I wasted watching a printer working, lol.

@kiltmaster7041

3 жыл бұрын

Both definitely have their uses, and I don't think that either one "kills" the other. Neither are redundant or obsolete technologies. One is a knife, the other is a screwdriver. Sure, you can turn a screw with a knife, but it will be suboptimal... And it will be equally suboptimal to try to butter toast with a screwdriver. Generally - if you're aiming to make minis, I would say that a resin printer should be your first acquisition, as they are easier to use, require less tuning, have fewer variables, and make much more detailed and high-resolution prints with a very high degree of reliability. This works well for D&D miniatures, WH40k miniatures, KOW miniatures, and several other games. Additionally, most of the minis released through the likes of Loot, Myminifactory and Cults3D tend to expect that you're going to be printing them from an SLA resin printer. At a later date, if you find yourself wanting to make vehicles and terrain on a more regular basis, feel free to reach for an FDM model. I use an Ender 3, which is an entry-level, cheap FDM printer model that will give pretty decent results if you aren't worried about a few defects. I mostly use it for cosplay elements, and I can attest that it works spectacularly in that role. The larger print bed is definitely a huge plus. Additionally, I tend to find that well-printed FDM components are noticeably (but not massively) more durable than their resin counterparts. a 2mm thick, 3 inch long, 1 inch wide strip of printed resin takes significant and deliberate effort to break with your fingers. It does not yield, and will suddenly just shatter. An FDM component of the same measurements will be impossible to break with your fingers. It yields slightly before snapping cleanly. Short version - different horses for different courses... But if your goal is to make minis, I would recommend an SLA. If you want to make cosplay elements or functional components, FDM is still king.

@djprogramer973

3 жыл бұрын

I second that I use mine for practical uses. I print combs, hooks, and the quality for stuff like stands, holders, and storage Cheap, convenient, and the filament lasts for a long time for me. There's no need for me to upgrade it.

@SteelWolf13

2 жыл бұрын

@@yannickg6904 You watch because secretly your scared it will stop working and have a failed print and you might miss it. Same reason people watch Nascar. Hoping for a wreck. But not really but what if?!

I bought the Anycubic Vyper a few months ago and have been printing buildings and terrain pieces with it. I love it. What a great printer!

Super great video, man. Lots of good information here!

@KnarbMakes

3 жыл бұрын

Thanks Boylei. Can't wait for your next space western video! Cheers!

that is madness how good those look

models = resin, terrain (and some tanks) = FDM.

@notimeforwargames3048

3 жыл бұрын

Yep, it is not so much about choosing one or the other, their each have their strengths and weaknesses. Terrain and large vehicles are generally easy to print well on FDM printers, but if you are going to make anything smaller than a space marine dreadnaught, then you probably want to switch to resin.

@XxSTOZZYxX

3 жыл бұрын

disagree. it's purely cost. FDM is surely cheaper, but it's slower AND less detailed. The only reason my current terrain project isn't resin is because my bed is small. That's it. Given equal surface area, SLA not only prints with greater detail, but faster. And the cost isn't too much higher. The BEST option is framing in fdm, and attaching SLA detailed parts. Even then, you're not saving much as a hobbyist. talking change on the dollar for hours of time.

What a time to be alive, great job mate 👌

Great tip, about the orientation. Still not convinced to buy one, but included magnet bed and auto-leveling do make this one tempting. Nice vid, Knarb

@KnarbMakes

3 жыл бұрын

Right on!

@TremereTT

2 жыл бұрын

@@KnarbMakes I can't decide if I should buy a cheap Anycubic or a cheap FLSUN. It's horrible.

wow great work!

Your chassis design is so dope.

@KnarbMakes

3 жыл бұрын

Thanks Andrew

Great Vid thank you.

Ty sir.

Great video!

@KnarbMakes

3 жыл бұрын

Thanks!

That's really impressive printing!

@KnarbMakes

3 жыл бұрын

Thanks Euan!

Well done

I also have a anycubic fdm printer but I've struggled with the settings for years. Your prints look fantastic by comparison!

Pretty amazing stuff!

the coolest calmest tuber around!!!

I've seen extremely impressive results with people taking steps to compensate for layer lines and ghosting. TeachingTech just released a video about it. Plus, I see the appeal of a no hassle print that you don't have to wash and clean and cure after.

Thank you for this 😉👍

@KnarbMakes

3 жыл бұрын

Welcome 😊

This is great! I've been thinking about 3d printers for ages now and had basically decided if I ever get one it's going to be resin... but now it looks like i need both :P So many project ideas. Also great to see another Canadian on here! fantastic work man.

@KnarbMakes

3 жыл бұрын

They both have their uses, yeah. Hope this helps you decide better, or just get both!

Astounding.

Awesome video

Great stuff

Great skill.

I started 3D printing a little over a year ago with a resin printer. I got frustrated that I could not print large terrain pieces so I just bought myself an fdm printer and it's going great. I love the fact that it prints larger objects and the material is much more resilient since the resin tends to be brittle. I have also got myself some primer that's intended to fill small gaps. I've been told by Kathy Millett that it should do a pretty good job of hiding the layer lines.

@KnarbMakes

2 жыл бұрын

Filler primer and a bit of sanding always goes a long way! Cheers!

Great review! Thanks. I’ve been watching for awhile but haven’t made the plunge yet! Good news is that it’s not really a vhs or beta potential for a ‘wrong’ choice. The apparent ease of SLA/cleanup makes me lean in that direction for sure. Thanks again! 🙂🥦🦖

Well now I am going to try that alternate orientation thing you mentioned.

Just picked up a brand new fdm printer for less than the price of a gw baneblade, now going to print off several baneblade and hell hound minis. Been resin printing for 6 months and have some tank and terrain files ready to go. Thanks for the video mate👌

@KnarbMakes

3 жыл бұрын

Happy printing!

@bidensniffsithuntersmokesi9413

2 жыл бұрын

when I get a printer can I borrow those files from you ease friend? ☆

@stewartdickson7184

2 жыл бұрын

Where do you find the files for these - completely new to this printing stuff

I'm definitely getting one

Those tanks look awesome

Baneblade flex Looks great! You're getting really good at printing!

@KnarbMakes

3 жыл бұрын

Haha, I need to find a good name for it now.

Printing terrain for Bolt Action is what inspires me and larger more sturdy 3D prints for my robotics class ... I only have a resin printer and I do see your point about printing larger volume things.

Nice!!!

They both have amazing uses If you have room for both get both

I have the Creality CR6-SE and is one of my loves.

Yep. Orientation of the parts on the build plate is important. And doing your own CAD work...inevitable if you really want good results. I do the same as you mentioned in this video: mainly FDM and resin for the tiny greeblies. The new giant resin printers kind'a scare me! I have also recently jumped into working with Fusion 360 and wondering why I haven't done it sooner. Good content and a great channel! Thank you!

Dang the orientation trick is genius! I do not have a printer but this seems like a super obvious solution that I would have easily missed if I had one! Love how your army is coming along!

@KnarbMakes

3 жыл бұрын

I've been trying to re-slice and re-orient other models I find as well. I see a side that would look a ton better printed flat, I just slice it off and place it on the bed and glue it on later. Cheers!

@croggyjones7899

2 жыл бұрын

@@KnarbMakes my top surface is always trash though. how do you improve this?

@KnarbMakes

2 жыл бұрын

@@croggyjones7899 you can turn on ironing to improve it. Some slicers let you do this. I use prusa slicer for it

I came for the title but I stayed for this man's art

nice video!!

@KnarbMakes

3 жыл бұрын

Thanks!

I have both a resin and FDM printer, and the key is to play to their strengths. I’m a model maker, so being able to print in polystyrene on the FDM is a huge plus. Polystyrene prints beautifully, is light weight and strong, and sands easily. It bonds well using Tamiya model cement, so I can easily add kit part details. I typically only use the resin printer when I need highly detailed parts. These usually will be super glued to a larger piece that was built up on the FDM.

My first printer was an Anycubic Predator. Lots of potential with a bunch of quality of life features that you have to install yourself on other printers, but it went out of production without warning and parts dried up quickly. Seeing as how it had a few parts that just liked to break, I eventually just had to give up on it.

I'm very much on the fdm for terrain, sla for models side.

Great advise and technique, very new to FDM printing and am always looking for ways to make my prints look as resin printed as possible.

Printing hulls in FDM and then all the extra's in resin is a neat idea. For me my FDM printer is just for bases, and terrain plus other odd tools and gadgets for around the house. At $12 for a roll of PLA+ and vase mode for most terrain pieces it goes a long way. You can print a whole tournaments worth of terrain for the price of 1 really nice table with plastic terrain.

Amazing job, I imagine that the care in the details came with the experience, i didn't challenge myself yet to use fusion 360 to make proxy's but i really would love to get good at it 😁

I know nothing at all about 3D printing, but those look ace I wouldn't be able to tell the difference.

@johnschweiger1079

3 жыл бұрын

Unless you’d actually tell me I wouldn’t of been able to tell myself

Nice. Got myself a Creality 3 Pro and love it. It’s Great for printing Ork stuff.

nice build's bro

Exactly, pick the right tool for the job. :)

You can also combine the two, I've seen models that print Panels in Resin and attach them to a FDM Core.

@KnarbMakes

3 жыл бұрын

Yeah, best of both worlds!

"FDM sucks" - said the guy who only prints in the cheapest PLA with the default """super fine"""" cura profile i've printed multiple vehicles on an ender 3 with Silk PLA and well tuned settings and they look about as well as resin prints hell, i've had resin tank parts warp during washing and curing and not fit together recently i tried printing some lightning claws and they look a bit dirty and blobby, but i'm convinced they'd look fine with a 0.3mm nozzle

@euansmith3699

3 жыл бұрын

"... dirty and blobby..."; paint them glossy red, and they become GORECLAWS, drenched in the viscera of your foes.

@KnarbMakes

3 жыл бұрын

Speaking of slicers, take a look at prusa slicer, it's free and can support many printers. The settings and features outshine cura in my opinion.

I want to use them to cast in metal with sand moulds, so these machines have opened up an entire new avenue for examination. Resin are *too* detailed for what I need tbh, and I'm just glad to have this option

Since their beginings in 2012 I knew I should wait a decade to afford one that will not only be cheaper but also the quality will be better. The time wil soon come.

Can you do a video about the orientation part? That would be great =)

It's really about the print size for me. I've got an Ender 5 Pro with a few upgrades and the quality is amazing. You need regular maintenance and a slower print speed, but you can really hide the layer lines if you take the time to dial in your printer, slow it down, and orient things the best way (as you mentioned). The only thing an FDM printer cannot do is the incredibly small pieces like legs on miniatures. The precision just isn't there.

FDM are must haves for big vehicles and terrain.

Really cool tanks shown here. Makes me excited to grab a printer. Tbh I think ill be grabbing both styles of printer when I can afford it, it's so exciting trying to print them aswell as paint them. I feel like a kid again haha xD

Very clean! Not sure if you know, but if you enable "Ironing" you'll get a very smooth top layer as well. It helps eliminate the crosshatching on the top layer.

Great vid mate, I have the ender 5 plus and the ender 3 and yeah I admit they have been sitting there gathering some dust. Time to get them working again I think.

I've been thinking of getting a 3D printer, this is really making me want one

Ah hell, gotta start a guard army now.

Love my Ender 3 Pro...even after upgrades like all metal hot end, glass build plate, stronger bed springs and metal extruder. I mostly print N scale Battletech miniatures, but also Pokemon models and larger 28mm Battletech Mechs.

Nice

FDM is about $0.10 on the dollar of sla once its all said done with detail that is fine for vehicles and terrain. It can do figure but the SLA wins there. I routinely print 15mm tanks without issue or loss of detail in FDM, but can do infantry

I actually got my new anycubic vyper just 2 days ago and I am impress of her performance and as you mentioned for a budged printer the Vyper absolutely rocks, as you I tried some of my more sofisticated models related with Warhammer 40K and they looks great, I am renovating all my battlefield with her and starting to make some tanks as well recycling parts and creating some parts with clay as well is funny how I end doing almost he same you doing :D

I honestly have both. I'm more of a "builder" I rarely make miniatures or trinkets so my fdm is my workhorse, but I do like being able to print finer parts that don't have to be as strong. Or if I need something for reference before I order a metal part.

I've had an Ender 3 Pro for about a year, and other than having to relevel it every few months, it's been a solid machine. That relevelling though...its enough to make me intrigued by the Vyper if that self-levelling feature works and continues to work over time. The orientation of the parts is a fantastic idea, if you can do it produces a very smooth finish. I have become adept at post-processing for those prints that cant be done that way....primer/filler, Mod Podge, wood putty, sanding...they are all close friends now ;-) Those tanks are awesome btw. Cheers!

@KnarbMakes

3 жыл бұрын

Yep, some sanding and filler goes a long way! Sometimes layer lines can't be avoided.

SLA is absolutely the way to go for anyone at home printing high detail figures, small scenery and jewellry (for casting). I think for almost every other purpose FDM is still the winner - it's cheaper, the build volumes are higher, there is less mess, stink and chemicals to worry about.

Well im definitely not going to have a bunch of dangerous fumes around and have to cure my prints so no thank you too the resin printer

ke fuccin' se. looks great

I recently dusted mine off and am back to printing terrain :D

Resin printing is cool....I have printed some amazing things....but I will ALWAYS print on my FDM printers....they are workhorses and cheap and I can print at .03-.05 not on my CR-10's after my upgrades.....Love them.

I wish I knew about this printer before I got the Flash forge Adventure 3. It's a good printer, but it's more expensive and has a smaller bed size

Whoa!

And just like that he designed a tank :D. Mad genius this man.

@kiltmaster7041

3 жыл бұрын

Designing a tank isn't particularly difficult. With about an afternoon's tutelage, you could probably make a decent looking tank in about an afternoon. They're basically just a box. The skill is in making it look cool. :)

Okay... this is tempting given I want to print big toys as well as standard marines.

The answer is you really need both because they both have strengths and weaknesses.

@KnarbMakes

2 жыл бұрын

Haha, of course!

Each tool has its own area where it can shine. Personally I prefer over FDM over SLA. Once you got it tuned in it doesn't fail much and easy to setup parts for printing and requires much less work.I never understood the problem people have with bed leveling. I rarely level the bed once it is initially don and just adjust it by eyesight judging on the outcome of the first layer. On the other hand SLA is quiet and needs less space for the printer itself. It is faster than FDM too. I never understood why people want to print whole terrain pieces in one go and then have to deal with layer lines.

@KnarbMakes

3 жыл бұрын

Well said. I'm having fun finding good uses for each one and mixing up projects across both.

@barrag3463

2 жыл бұрын

I honestly don't even care about layer lines; as for leveling, from experience it is usually because people will remove stuff while the print surface is still attached to the print bed. The result is the bed being jolted a bit out of level, but a bit out of level is all it takes. By taking the build tak or glass plate of metal plate off to remove the print you can go a while before needing to relevel.

I've always prefered FDM because of its ease of use and not needing extra precautions to use.

i wish i had somewhere to put a 3d printer so i could actively consider getting one and try saving up for one

@SB_Artsy

3 жыл бұрын

They take up an Ikea lack size space

Funny - had the Anycubic Mono (SLA) first, now i bought the Anycubic Vyper because of the print size for part which dont need such details. They complement each other and i mix up my models with both printers. SLA for detailed stuff, FDM for large stuff.

1:48 My first model. This model don't need supports and I put all supports that's the software can give me XD.

I have both a FDM and Resin printer

you forgot the main evolution: non planar 3d printing... can be used on any 3d printer, but if you go to 5d...

@ge2719

3 жыл бұрын

yeah, i was just thinking priting a eldar tank would turn out pretty bad with all the shallow curves turning out like tiny steps. put printing those curves smooth should produce a much better result/

I appreciate the orientation advice, but the bane of my experiences with fdm has been stringing. Got a resin printer before fdm and just found the user experience to be a lot smoother. But you nailed the role fdm plays in table top gaming, though I'd still print tanks on my resin printer.

@KnarbMakes

3 жыл бұрын

For sure. I've had a lot of frustration with FDM printers in the past. It takes a bit of learning to figure out the failure modes. I still get some stringing, but I can mostly clean up the prints with a lighter and some light sanding.

@jasonjulian1

3 жыл бұрын

Turn your nozzle temp down and enable combing mod for All within the slicer.

@Dustin030888

3 жыл бұрын

That's why they make stringing tests so you can dial in your settings to avoid stringing. Cura slicer has a built in extension that allows for this and works well. They also have a temperature test. You can use both on each filament you use to dial in the settings. It isn't difficult.

@gustavrsh

3 жыл бұрын

Lower the temp, increase cooling and dry your filament (if not using PLA)

@DeusMachina71

2 жыл бұрын

I agree and really resin Printing is not much more expensive anymore perhaps 25-30% but the results are much better in my opinion plus I find resin Printing less of a hassle these days wth large format mono 4k printers and dedicated wash cure machines. FDM may not be exactly completely obsolete but it's just about there.. two years tops when medium format 8k printers price comes down. The industry is evolving quickly

I still use my Prusa MkI3 still works like magic for me and still make me excited to print something everyday

@KnarbMakes

3 жыл бұрын

Glad to hear it! Happy printing!

@cyber649

3 жыл бұрын

I got a MK3s+ and I love that printer. Just an awesome work horse, it just works. Worth the money for a quality printer. My Ender Max is collecting dust. I would love another MKs3+ for no reason.

Videos like these are great - because the post-process requirements for SLA mean that there is nowhere to put it in house, leaving FDM as the only future choice (but airbrush first) for hobbying - and vehicles and terrain would be the primary print subject anyway (and realistically, the printer companies will be working hard to get better FDM quality at lower prices)

@KnarbMakes

3 жыл бұрын

Yeah, I've had to devote a corner of my workshop and set up a fume hood for my SLA printer. Thanks for watching!

Ngl, the result you got on thos tanks are pretty impressive. That said, let's be honest here, flat tank armor parts is probably THE best case scenario, and while it does fantastic there, I wouldn't be so sure that it would do any of your standard 32MM infantry.

They are awesome just out of interest how much did it cost to print the baneblade and the other tanks thank you

Knarb! You and I are seemingly working on the exact same projects... 1) Dune minis 2) illuminated 40k terrain 3) FDM vehicles. I’m new to 3d printing and your tip on orientation is perfect! Im using a CR-10 V3.

@KnarbMakes

3 жыл бұрын

Haha that's awesome! Bound to happen with someone at this rate.

@House-Atreides

3 жыл бұрын

Please check out Submersible LED pool light on Amazon. They have a controller and are very robust for multi colored lights. Little pucks are easily tucked under gantries With magnets

@KnarbMakes

3 жыл бұрын

@@House-Atreides will do! Thanks

I have a resin printer and now I want an fdm for larger pieces that don't have a ton of little detail. They both have their place until resin comes down in price. If that ever happens there may be a case for FDM not being the best option but I imagine filament would just go down as well making the whole thing a moot point. Either way they both seem cool.