DIC for Beginners II Fast and Accurate Digital Image Correlation
#DIC #Beginners # GOM #Digital_Image_Correlation
Жүктеу.....
Пікірлер: 26
@yunsongguo5842 жыл бұрын
It is a pleasure to listen to your class, I have gained a lot from you today! Thanks.
@doganacar13512 жыл бұрын
Thank you for this great tutorial and your efforts. Could you please tell us when will you upload the next tutorial (stress-strain curve combining) you mentioned at the end of the this tutorial? Thanks in advance.
@kareemakrawi4758 Жыл бұрын
Thank you for your efforts
@yusufcaglacet5007 Жыл бұрын
Very good video
@timetroller2556 Жыл бұрын
Hi, is there a way to find poissons ratio in this program? Can I calculate it with strainx and strainy averages?
@Johnssj102 жыл бұрын
I've tried using this software in the past but regardless of importing pictures or videos, they always look considerably worse than the raw file. Almost looking like they're being downscaled or some weird kind of post-processing is happening (increase contrast and saturation in case of colored files) And there is certainly some kind of artifacting happening. What I'm importing is either JPEG or MP4 files.... Any suggestion for improvements ?
@liweizhang1037 Жыл бұрын
Hi Could you share the video that you shot? Thanks.
@lujoinva2 жыл бұрын
Hello great video, thanks for sharing. I have seen your next video which i am more interesting, how to relate load with extensometer. Thank you
@CMEAcademyforPPSC_FPSC2 жыл бұрын
Hi! Really thanks first of all. Could you please let me know how did you get this version? As I have GOM suit free version and I can't import data in that. It's not available.
@l.mansouri2902
Жыл бұрын
Hello, Can you share the link for the free version ?
@moussabalqaissy71102 жыл бұрын
I need to know how to use pictures anlaysis for concrete beam and calculate virtical displacements and starains > it would be great if you explain that in video on your chanel > thank you so much
@uwofracture2 жыл бұрын
Hi there, Thanks for the video. I installed GOM-Software-Installer-2021_Hotfix_4.exe in the link. It crashes whenever I run the software. Any advise?
@santoshb64982 жыл бұрын
Hello sir, is it possible to measure negative Poisson's ratio accurately using this setup?
@10Minuters
2 жыл бұрын
Hi, You can find in plane Poisson's ratio using length strain (e_l) and width strain (e_w). Let's say negative strain in the thickness is e_t, then e_l+e_w+e_t=0, so, e_t=-(e_l+e_w). Now knowing all the strain components, you should be able to calculate any Poisson's ratio you want. Hope it helps.
@max-iz9cc7 ай бұрын
I've got a question: When I try to create a diagram nothing will show up and GOM says: ''In the 3D view no elements with diagramdata are viewable'' Do you know how I can find a solution?
@CP-zi3eg2 жыл бұрын
Very interesting video. I would like to know if there is a way to eliminate or reduce the prospective view in order to have a near exact frontal view of the specimen. Thank you
@CP-zi3eg
2 жыл бұрын
Btw. It seems it's not free
@10Minuters
2 жыл бұрын
@@CP-zi3eg Hi, I have a year old version of GOM in my desktop which was free and still free to use. Has something changed since!(?) Can you please try this link and see if it helps: www.trilion.com/gom-suite#
@10Minuters
2 жыл бұрын
To eliminate perspective you will need 3D DIC with at least two cameras and GOM was never free for 3D analysis, unfortunately.
@hassanelshokrofy2967 Жыл бұрын
thank you, but the version i downloaded need license. isn't it free?!
@10Minuters
Жыл бұрын
Hi, unfortunately recent versions are not free anymore :(
@BrunoBertasoli3 ай бұрын
hi!! could you send me the video you used, so i can try to manage the software??
@muralikartheekss29322 жыл бұрын
I think the software is now commerical. No longer free
@tsehaygemechu1953 Жыл бұрын
how i can get the crack of software
@ullrikegabler4 ай бұрын
Useless as its a paid software, remove the video or edit the description
Пікірлер: 26
It is a pleasure to listen to your class, I have gained a lot from you today! Thanks.
Thank you for this great tutorial and your efforts. Could you please tell us when will you upload the next tutorial (stress-strain curve combining) you mentioned at the end of the this tutorial? Thanks in advance.
Thank you for your efforts
Very good video
Hi, is there a way to find poissons ratio in this program? Can I calculate it with strainx and strainy averages?
I've tried using this software in the past but regardless of importing pictures or videos, they always look considerably worse than the raw file. Almost looking like they're being downscaled or some weird kind of post-processing is happening (increase contrast and saturation in case of colored files) And there is certainly some kind of artifacting happening. What I'm importing is either JPEG or MP4 files.... Any suggestion for improvements ?
Hi Could you share the video that you shot? Thanks.
Hello great video, thanks for sharing. I have seen your next video which i am more interesting, how to relate load with extensometer. Thank you
Hi! Really thanks first of all. Could you please let me know how did you get this version? As I have GOM suit free version and I can't import data in that. It's not available.
@l.mansouri2902
Жыл бұрын
Hello, Can you share the link for the free version ?
I need to know how to use pictures anlaysis for concrete beam and calculate virtical displacements and starains > it would be great if you explain that in video on your chanel > thank you so much
Hi there, Thanks for the video. I installed GOM-Software-Installer-2021_Hotfix_4.exe in the link. It crashes whenever I run the software. Any advise?
Hello sir, is it possible to measure negative Poisson's ratio accurately using this setup?
@10Minuters
2 жыл бұрын
Hi, You can find in plane Poisson's ratio using length strain (e_l) and width strain (e_w). Let's say negative strain in the thickness is e_t, then e_l+e_w+e_t=0, so, e_t=-(e_l+e_w). Now knowing all the strain components, you should be able to calculate any Poisson's ratio you want. Hope it helps.
I've got a question: When I try to create a diagram nothing will show up and GOM says: ''In the 3D view no elements with diagramdata are viewable'' Do you know how I can find a solution?
Very interesting video. I would like to know if there is a way to eliminate or reduce the prospective view in order to have a near exact frontal view of the specimen. Thank you
@CP-zi3eg
2 жыл бұрын
Btw. It seems it's not free
@10Minuters
2 жыл бұрын
@@CP-zi3eg Hi, I have a year old version of GOM in my desktop which was free and still free to use. Has something changed since!(?) Can you please try this link and see if it helps: www.trilion.com/gom-suite#
@10Minuters
2 жыл бұрын
To eliminate perspective you will need 3D DIC with at least two cameras and GOM was never free for 3D analysis, unfortunately.
thank you, but the version i downloaded need license. isn't it free?!
@10Minuters
Жыл бұрын
Hi, unfortunately recent versions are not free anymore :(
hi!! could you send me the video you used, so i can try to manage the software??
I think the software is now commerical. No longer free
how i can get the crack of software
Useless as its a paid software, remove the video or edit the description
@10minuters