Diagnosing/Replacing a Ballast Resistor Gone Bad!! // Engine Starts But Won’t Run? // NOTaRAODRUNNER
Автокөліктер мен көлік құралдары
NOTaROADRUNNER Episode 18
Hi Mods, Welcome back !
Round and round we go! The Plymouth’s broken once again... today however should be a pretty quick easy and cheap fix! It’s all what we want to here when it comes to broken down cars! And I’m very excited to take you along for the ride...
I honestly can’t share my appreciation enough for the old school car community the amount of dumb questions I ask must be baffling but the fact they want to support young people interested in cars is brilliant for people like me ! Rock on UK Mopars!!
Check out my Instagram!!
_notamod_?igshi...
If you enjoy this video feel free to give a like,comment and subscribe and don’t forget to hit that bell 🔔
Link to the music used:
JJD - Adventure
• JJD - Adventure | Glit...
DISCLAIMER: I am in no way a trained mechanic, I am just a car guy that lives tinkering around with his cars. Feel free to follow along with the method I have used and the parts I order but please be cautious that mods and adjustments shown may not work for your car, and may affect your warranty (not an issue with classics). Most importantly be safe, be responsible and if you do begin to feel out of your depth please contact a trained mechanic to give you some professional guidance.
Пікірлер: 47
Very cool! I found this video a bit too late. I bought a 1960 Chevy Biscayne and my car started choking and bucking when I was leaving work. It happened right after I got a new tank of gas (car also sat for 20 years from the guy I bought it from, thought corrosion could have clogged the pickup tube.) Changed 60+ year old sending unit, pump, and plugs, still no run. I saw the connector had fallen off of my ballast resistor, so when I went to reconnect it I saw the rod inside had snapped completely in half. Everything that your car is doing is exactly what mine did, short of it able to stay running (albeit horribly) if I gave it a lot of gas.
🤗thanks so much! you answered a bunch of my questions about my b.resistor problem. you are a big help!
@NOTaMOD
2 жыл бұрын
No worries at all! I just want to pass on everything I’m learning and document it for me later when I forget 😂😂 I’ve already had to rewatch my videos a couple times to relearn what I’ve forgotten 😂😂
Thank you! I now know something new and useful.
@NOTaMOD
5 ай бұрын
My pleasure! That is essentially the moto of the channel! Just trying to learn as much as I can. Whilst your here, if you could subscribe to the channel it'd be much appreciated! Will be uploading plenty more content like this as no doubt the Plymouth will always be continuously falling apart haha !
I have same problem, will confirm later
Hi Dylan, good job. I’ve never heard of the resister going bad. Evidently they do. Hmm, I learned something today. Take care & TTFN!
@NOTaMOD
2 жыл бұрын
Honestly a load of my friends swear they carry about 6 to meets because they go bad so often haha maybe it’s our great British weather 😂😂
Great video thanks what happens if they are installed backwards the one i have is the identical to the one you replaced the one i have gets very hot to the touch only min.after running is that normal it would burn you if you held it thanks
Resistance is futile. My Jeep's fuel pump has a very similar ceramic-cased ballast resistor, roughly 1.4 ohms or thereabouts.
@NOTaMOD
2 жыл бұрын
Good to see moose hasn’t changed over the years 😂😂
I think you just answered my problem. I took off the HEI Distributor because it sucked . I put my old dis. back on with my Ballast Resistors W/ the 12V hot wire on the coil forgetting it did not need it like the HEI. Now I think that no why it would no start ?
@NOTaMOD
5 ай бұрын
Yesss, I believe a HEI Diss uses 12V which is why you bypassed it, but I think if the stock runs on the bypass for too long it can fry the coil. so if you did not catch it in time you may now need a new stock replacement coil? Hope this helps! Sub to the channel for more Plymouth content!
@SuperDirtyred1
5 ай бұрын
thanks@@NOTaMOD
i have hyundai azera 2009 & i found a resistor for my ignetion coils in the parts catalog. if it's became faulty what are symptoms? because the engine have random stuttering even i can hear the statics in the speakers because of it! by the way the spark plugs, coils, battery, alternator are new & the diagnostic tool don't show misfire
@NOTaMOD
5 ай бұрын
That is most definitely a head scratcher! I am no mechanic but if you have replaced all the above mentioned parts it can't hurt to also change the resistor. As you can see for my car it means that the car will start up and run but the second I turn the key from start to run position it cuts off that's where the ignition system circuit is trying to run through the bad resistor and therefore the circuit is being broken. If your car is running and driving I do not believe it should be the case but for a relatively cheap part it might be worth replacing just for piece of mind Let me know how you get on!
Thanks, it did help.
@NOTaMOD
5 ай бұрын
Brilliant! Whilst your here if you could subscribe to the channel it'd be much appreciated! Will be uploading plenty more content like this as no doubt the Plymouth will always be continuously falling apart haha !
Yeah baby. It's a dodge so you have to ump that pedal on first cold start 10-20 times to prime the carburetor. After that it'll start easy all day long.
@NOTaMOD
Жыл бұрын
Yeahhh mine does love getting my leg working for first start up haha
I have a 1973 Jaguar xj6. I have a ballast ignition system on it. The ballast resistor starts to smoke and get very hot when I turn the switch on. What's causing that???
@NOTaMOD
4 ай бұрын
That sounds like its short circuiting on something maybe the internal resistor is grounding on something? definitely should not be smoking.
Snap lock battery terminal, them are pretty nifty
@NOTaMOD
2 жыл бұрын
Honestly they were one of the first things I bought as I knew I’d be taking them on and off almost constantly 😂😂 if memory serves it makes it the best £10 I ever spent haha
@SuperDirtyred1
10 ай бұрын
Pretty Awesome , My luck only available in the UK.😂 lol🤣
you put it so dump tw,,ts like me could understand ..well done well done sorry i have a stutter
@NOTaMOD
Жыл бұрын
😂😂😂 Glad it helped mate! Gotta keep these old girls on the road 👍💪
Damn... Turns out that my 51 Ford 8N tractor ballast resistor was bad.
@NOTaMOD
Жыл бұрын
Awww that does suck! at least it’s an easy fix if it’s located like the plymouths 👀👌
Points in my distributor were burned. Could running coil without ballast resistor have caused the points to burn?
@simbamudzinganyama4629
2 жыл бұрын
hie dont know if you have found an answer in line with that but if it helps in any way i do believe it also quickly burns them out will give you a link to a video which also supports that though i have experienced it first hand and i also believe it affects the condenser as well Because today i just had the same issue and changed the condesner and soon after quick start and idle but sad par, two days back we had chamged the condenser because we were overrevving doing wheeelies lol . so i am hoping to replace it tomorrow the resisitor.
@NOTaMOD
2 жыл бұрын
Yes I think so! It can really bugger up your entire ignition system so points and leads included in that!
@rossbrumby1957
2 жыл бұрын
Blame your condenser- I had a paddock basher datsun 1600 i slapped together from stray parts. There was no ballast resistor so I ran it without one, car lasted most of a year of racing on the claypan before the gearbox blew. No problems at all from the ignition system without a ballast resistor. Some coils may die from this, but mine didn't and it was an old, dirty standard one from the parts pile.
Replaced it. Still same problem😤
@tonytenchaduronforever1542
2 жыл бұрын
Did you ever figure it out my 1974 d Doodge charger is still turning off 😖
@NOTaMOD
Жыл бұрын
How did you troubleshooting go? At least the part you replaced wasn’t too expensive ! 👍
@mbtranzportllc
3 ай бұрын
Me too 😡😡😡
Can u do a dry coil video
@NOTaMOD
Жыл бұрын
I am not entirely sure what you mean by that but I can definitely look into it and get on that in the future👌💪
Saw my ballast resistor smoking and now I'm having a bad time
@NOTaMOD
Жыл бұрын
Yeah I bet you was! Have you got to the bottom of what the issue was?
A 72 should have a 4 post resistor. It should also have electronic ignition. 72 was the first year of it.
@NOTaMOD
3 жыл бұрын
Hmmm not sure why mine only has 2 post then 🤔 maybe to do with it being may of 72? Not sure it’s also points distributor 🤔
@rossbrumby1957
2 жыл бұрын
Makes sense, 73 was the first year Aussie Chryslers got electronic ignition- in the VJ model Valiants.
@SH00T_TH3PUMP
11 ай бұрын
74 was the first year. For 4 post, and electronic ignition.
i FIND IT IMPOSSIBLE TO GET GOOD MOPAR PARTS. LIKE STARTERS
@NOTaMOD
Жыл бұрын
Yuppppppppp