This is one of the best videos I've ever watched. Straight to the point, detailed footage and no unnecessary talking.

@FixItAngel

3 жыл бұрын

Thank you brother for the comment.

@Mavs24

2 жыл бұрын

Agree!!! And its step by step too. Really did a great job.

@garyscholte518

9 ай бұрын

W204 1.8 oil seal goes all the way down the shaft is this common

I like this guy's videos,doesn't even need to talk,and still shows how it is done.good job.

Seriously the best detailed video I've seen in a long time. Props to you sir and the great editing!!

I've been wishing people would make speechless video. Less talk and more action. We're not looking up these videos to make friends. I appreciate your style.

I again wasted time looking at other videos that spent more time on talk and special equipment than giving me the simple answer. Thank you for a your explanation on why my Matrix is all oily on the right side of the engine compartment and how to fix it. Simple, quick, and effective.

Very good video. Came here for help on how to put that crankshaft oil seal without damaging it and you showed perhaps a basic way of doing it but it was straight to the point. Thanks

Thank you Mr. Angel. I hope that the car that I would work on it the oil that is falling every where comes from the same place.

Thanks man! You make it look easy and it really is. In my case actually easier as the harmonic balancer just popped off/on with my bare hands. Too bad I already bought an expensive puller for this job but maybe I’ll get use of it some other time. What really was stuck was the seal it self. Broke me a pair of pliers and seal hooks. That thing deteriorated completely. 19 years and 370k kms sure made its mark.

ingenious with the puller bolts!

I Need This Guy As My Mechanic,Moves Fast & Gets A Lot Done in An Hour !!! LOL

LOL... U make it look so simple, But I love the videos. I am learning a lot. Keep putting them out there, and let's see more of the little daddy's girl pushing the wrench's.

Awesome. Thanks again for another great video. I just replaced the water pump on my 08 Camry with 2gfre engine. wow it was a long (3 day) job. I should've replaced the crank seal too. But forgot it looked good. Maybe another day I'll change it.

You make it look so easy, well done Sir & thank you for sharing.

Very nice, it’s pretty explained not a lot of talking. Very professional!!

Great video. You sure make it look easy. I replaced the rear seal on a 2000 Toyota Camry, and that was a lot of fun. 'NOT' 😖

Nice vid bro! My moms pulley jus went out. Gona get it done today thanks for the help 👍👍

This is the 'Almazan Kitchen' version of automotive work, awesome video.

All of that and a job well done - all without saying a word!

he best part of the whole video is that one handed oiling of that new seal before you put it in .. your a pro .. haha .. nice video

Thank you for the video. My camry is leaking oil from the same area, but not as bad as this. Now i know what to say when i take this to a workshop.

Thanks for the video. I fix my car in 1hour and i save a lot of money.

Thank you for the video! I might have to do this to my car!

I wish I live next door I would learn so much of this genius

Hey, Angel love ur vids no talking just straight to the point clean work wish u were in Florida lol

That's the same color as mine! Thanks for the awesome video. Luckily mine hasn't done this yet, knock on wood, but at least I know how to fix it now!!

He's one of the great ones , I love all his videos and music and the jokes he makes hahhaha

I love this video thanks so much for making it. You did a great job!!!!!

Thank you for great video! Be well. Please make more videos when time permits you.

Love the short clip formatting.

Thank you for your excellent videos. They have helped me do several repairs on my 2006 Matrix with 195,000 miles and it still runs perfect.

@FixItAngel

2 жыл бұрын

welcome brother, please like and subscribe

@MarzNet256

2 жыл бұрын

@@FixItAngel Done.

Very good mechanic

Thank God I found your video thanks for the great job no words more actuon!!!

Fabulous video and a first rate job!

Great video of seal replacement

Dude you are Genius I just seen you create your own tool on the Spot. You need to patent your idea man fo real!!!!!!!!

Fantastic! Thank you!

Brilliant work. Thank you

Parabéns amigo em bora seus vídeos sejam simples mais muito bom as dicas como essa do sacador da polia virabrequim

Great vid. 'Camera work clear.

excelent video. You should make one organizing your tools and stuff. Will be looking foward on this video, LOL and take care

Freaking pro! Nice job Bruh!!

Good job 👍

Great video. Thanks

Awesome VID....Thank you

Bien echo amigo! Very good myfriend, the best!

Thanks Par🤙🏽

Luv ur work man👌👏👌👏👌👏

Nice job brother

Private Brand has a seal tool set for R & R cam and crank seals on OHC engines. EBAY has it.

Nice custom tool angel

Good job brother From Pakistan

Great job!

Great job. I just did one. Not too bad.

Well done... you made it look easy

@FixItAngel

7 жыл бұрын

Hi Craig, thank you. Easy only if you have the right tools. have a nice day.

@kevinbrislawn5918

6 жыл бұрын

He's an amazing guy- he even cleans up the crap underneath..how many mechanics go that far?

Good job brother

great job

Fix it angel am your fan, i live in vegas i would like to see you make a video live, just saying man , am just a fan of yours!

Hello mister, i'm indonesia.. Kita satu propesi 💪

Thanks for posting this! I'll be swapping out my crank seal this weekend and this tutorial will be very helpful. Whats the torque spec on that crank bolt?

Good work

thanks! pro man!

Very nice 👍

Buen vídeo estoy suscrito

Great video Can you have a a video on crank oil sealers products do they really work and no need for this job

You are great.

nice, thanks

Hi haven’t seen a video in a while hope all is well god bless.

Owsom work sir

Hi Angel, Great vídeo. I have a corolla 2005 and apparently is leaking oil in the same place like the camry that shown in this vídeo, I would like to know if would be the same step to replace the seal in the corolla?

Good job I learned thanks you .

This somewhat the problem with my 2004 mustang, only its the rear main seal. I wish u could fix it.

Piece of cake when you don't need to take off water pumps and timing belts.

@atroche1978

7 жыл бұрын

smithraymond09029 yeah I'm getting ready to do my WP, therm, serp and timing belts, idlers, and 2 cam and 1 crank seals on my VW. This job was cake. I'm dreading mine.

@carsonisbetterthandak30

5 жыл бұрын

@@atroche1978 Next time buy a Toyota

@sbryann18

4 жыл бұрын

ThePariss333 which car do you recommend buying

@max41050

4 жыл бұрын

@ThePariss333 . You are either very inept when it comes to working on cars or you're being sarcastic, I don't know about the newer toyotas but the old ones specially the Camrys are the easiest cars to work and very cheap to maintain, try working on a 1998 Pontiac grand am, piece of crap like all the chryslers and GMC cars except for the trucks.

@huyvuquang9533

4 жыл бұрын

@@max41050 the pariss333 guy has some issues in his head, he keeps repeating comments =))) dont give him any more attention.

5 star

I offset the seal 1/16 th " so the seal won't go into groves. Sometimes I'll silicone seal to cover because that leaks occasionally.

Nice 👌 trick

I like your videos. What type of degreaser do you use? How does your driveway look after you rinse off the engine?

Can u use the same hook tool to pull the crank shaft pulley oil seal on lexus ls430 2004?

GREAT JOB LIKE ALWAYS!!!!

@FixItAngel

7 жыл бұрын

Thank you Bori, I always try to do a good job. It helps when you leave great comments. Have a nice day.

@borilopez8581

7 жыл бұрын

I LOVE YOUR VIDEOS BROTHER FAN # 1 HERE THANK YOU FOR YOU TIME AND DEDICATION

@FixItAngel

7 жыл бұрын

Welcome Bro, Thank you being a #1 fan. I will try to make FIX IT ANGEL t-shirts and give them out. You will be the first one to get it for free of course.

@borilopez8581

7 жыл бұрын

AWW THANKS

Hi again..when are you gonna do your sienna timing belt change thx

잘하시네요 최고👍

@myutube1960

5 жыл бұрын

I don't understand korean

vrey good

I normally hate these videos, but you did well. Is there any chance you know the part number or where I can get that harmonic pulley from?

Welcome welcome

did you using dye lite for cooling system into engine oil?? is that ok??

Good gab sire.

Angel, Is that same procedure on 2002 Honda Accord?

what is torque specs for harmonic balancer bolt? Would it be very difficult to do this without air impact? thanks.

Would stop leak of cured this by swelling the seal?

Hello Sir; I have a question, why harmonic balancers are used and why they have 2 metal pulleys jointed with rubber in the middle, why they can't be one metal part like other cars.

I think I am going to start collecting tools so I can fix my car by myself.

for that groove in the pulley where the seal rides. They make a thin sleeve and glue. You clean the surface area, apply the glue and push the sleeve over it.

@jazziehuell816

5 жыл бұрын

but you would still need good rubber on the other sides, correct? thats if theyre destroyed. im guessing no replacement for that part.

You are unbelievable

Thanks so much for this! Man, I'm about to replace the seal on my Girls 2006 Toyota Matrix. Do you know if the procedure is the same? I think it is, but I'm not a professional and it's kinda hard for me to find tutorials on the matrix. Thanks!

@max41050

5 жыл бұрын

That's why you need to buy Toyota Camry many videos on Camry my favorite car saves me a lot of money on repairs very easy to work on.

Good jod

Where does the solvent go when you hose down the degreaser ???

I have same exact car and color , i want to replace all spark plugs , wich brand would you recomend ? Im thinking Denso or NGk ?

👍👍

Did that broken pulley cause the engine to shake?

Is this the "REAR" seal or the Front, or it is just one seal? BTW this for a 2003 Camry 2.4L engine.

Nice video . But The two holes in the balancer are for bolts to use as extractor.

@FixItAngel

6 жыл бұрын

SirMeowcelot thank you, yes that’s right