Flat out, one of THE best mechanic-youtube videos! Why? Because it shows it like it REALLY is. Not everything pre-disassembled and then re-assembled for the video. Well edited and honest!! Thank you.

Sometimes no non sense noise is much better. Excellent video, as it showed where the four mounts are located on my Toyota camry.

@FixItAngel

6 жыл бұрын

Rosie Kelly welcome, please like and subscribe. Thank you

@KaleidoscopeKara

5 жыл бұрын

But the years are wrong. 92-96 are the same. The first year he included was a 96 so I was led to believe that this was the same for my 93. Not.

@heretoday9379

4 жыл бұрын

inkisbad 124 thanks!

@ygfromig

12 күн бұрын

@@KaleidoscopeKarayou may have a different engine. this is the same for my 93 camry

I wish, this guy is my neighbor 👍

@LinZhesu

3 жыл бұрын

With all the noise he makes everyday? 🤭 Joking

@clarin3318

3 жыл бұрын

Definitely

I love the only talking on this video is grunting when loosening bolts and “oh shit” this video is very helpful. I just found out my motor mounts are shot 😨

Love your vids bro! Not much chatter, quick and straight to the point. Edit out all the nonsense so were not watching a full 2 hour movie. Thanks a lot man!

Thank you! Gunna replace my mounts as well, thank god my pops has all of these tools you’ve used and lucky enough for youtube channels like yours that explain for others. I’ve saved hundreds if not thousands of dollars in mechanic fees and overall cost being able to do my own repairs/upkeep now. My 04 Camry LE runs like a dream w/ 107k miles and hauls ass, I go about 90-104mph daily @ 3.2/3.7rpms I don’t punch it but climb to those speeds so I don’t destroy my car. But it’s all due to folks like yourself who make it extremely easy to keep up with my cars maintenance, so a big thanks sir.

@FixItAngel

5 жыл бұрын

Jaime T welcome brother, be patient, take your time and be safe when working on your car.

Amazing video! I learned that all mounts should be replaced for proper service and you proved it when all the mounts you removed were damaged. Thank you very much.

I am getting ready to do this on a 94 camry. Excellent video. In my garage I have the option to use a chain hoist, but the jack is always easy. Just have to use good placement. Keep on wrenching brother. Oh, mechanics quoted 1400 for this job so I will do it for my friend (an elderly lady) parts are only 80. Gotta help people out sometimes. A pack of smokes and pizza is what I charge

Just when I thought I was ready to tackle the timing belt/water pump job, then I see this! Yikes! You are an artist....jacking the engine just right here and there, sometimes 2 places at once, to get the mounts unhooked and realigned just so! That was an artful and seemingly difficult job, high respects for you my friend.

I love how you showed the symptoms of the engine moving the movement shows exactly what's going on and you showed us what to replace. I've searched many videos and they never show the engine moving I appreciate your time and professionalism. I see your Filipino 🇵🇭 nice 👍🏽 Again Thank You! 💯

I was advised my 2004 v6 Camry needs new front mount. After watching this and reading the comments, I feel much more secure to ask questions. One thing I read in comments, use OEM which I hate to do but some parts you must, everyone agrees. Thank you SO MUCH for the excellent video! PS - being a girl, I didn't focus on auto shop in school - wish I had!

YOU SAVED THE DAY. By adding that bolt specs for the center mount (M12x1.25x42)... I got the bolt before starting the job, and luckily it was needed. thanks!

I love the way this video is put together. It's very straight forward and to the point.

You are the Man, I really appreciated that video, you didn't do a whole lot of talking. Straight to the point. Outstanding..

Thank you so much, fix it Angel, one picture says a thousand words, instead of talking so much and confuses a lot. That's good work.

Probably the best explaination of a motor mount ever. Believe it or not a simple motor mount causes so many unexplained noises and problems. Just repaired $400 worth of suspension parts that had nothing to do with the actual problems. Motormounts are cancerous appendages

Oh my gosh FINALLY a straight up to the point video. Thank you!

Totally dig your style. I like how you noted all of the work without talking. You got'er done. Now off I am to replace motors mounts now. Will subscribe now, thanks for the video.

Thank you for posting these how to videos. You are appreciated!

OMG, you are amazing. Also, I really like your video production. You let the repair speak for itself with the details inserted onto the video as commentary. Also, like the links. Very helpful. Thumbs up, I am a subscriber!

I want to compliment you on a very well filmed and edited video. Great job!

Angle you gonna be rich not too long from now. I love your videos, I subscribe them and thank you for sharing body. Your pay off shall be excellent, keep on awesome work. God bless

Great video that helped removal and installation a breeze! Tip for the top nut. Remove brace from air intake manifold to block then position a socket wrench pointing toward driver's wheel. Use prybar or similar rested against wrench and trans case for leverage (under car)...apply steady pressure. Thanks for the upload and many others that are straight to the point. These videos are an invaluable service when paired with repair manual literature.

Hahahaha love your videos bro! A comedian and mechanic at the same time!! Blessings! Happy new year!!

Your action equal your work playa. Apache Native American here. Great job brothers.

Great video brother. Those torque strut mounts don't last. OEM or aftermarket, doesn't matter. I just chalk them up as regular wear items. Cheap and easy to replace. I'd replace them every 30k or so.

What a great video found under so many not so good videos. I love it. Thank you for your help, Angel.

You are one brave person to hoist up an engine without out a crane !!

Excellent video; very smart to leave the bolts loose as placeholders until you have done all four mounts.

Thanks I Finally see a video that shows all motor mount replacements

Hey amigo thank you for the the video you not the only one but you are the best mecanic I have seen in KZread blessings 👋 from califas

I must do this job soon. This video helps very much. I wish I had the money for air tools but, that's life. LOL Thank you for the video.

Thanks for taking time in making this video. You are good.

Great video! Currently working on my 2000 Toyota mounts right now

Great video. To the point, and no extra chatter. And now I know how to get that rear motor mount out.

Excellent service. Wish we had mechanics like this in New Jersey. 👍

My rear mount is so low the engine is sitting on the engine mount rubber isolator, making vibrations through the body of the car from the front when accelerating. Thanks for the excellent close-up angles you did, they helped me see the difference in height between the old mount and the new one. Mine is definitely recessed.

Great Job ! Thanks for sharing !! I have a bad mount and thanks to you I can easily replace it !

That was the best dam repair video I’ve ever seen! Straight to the point. Not one f~in word.🥇🍾🍾

Dont know what it is about Hondas and Toyota but the flippin bolts are so f'in tight but when they pop loose you can spin them out with your fingertips. Shit and fuck are my two favorite words also lol😂

Fantastic video. Thanks for showing the process of replacement.

Best mechanic vid. Sometimes it doesn't work and you swear and have to change tactics.

Bro I love this video, you made me feel better about my day at work...word for word you and I

Great Video!!! I just had.. only one engine mount replaced...wish I would have seen this sooner.. .I have now liked and subscribed!!!

You are excellent mechanic, very professional.

Nice this video really Help me on my 1995 Camry 2200 engine mounts replacement 👌

I see it's been over 5 yrs but I just wanted to let you know you have the tools and cussed it just right when needed,,hahaha,,, I especially like the flex wrench for that back mount as I see that's the shit to get that top nut loose,, I've been looking at mine and got the parts and know they all gotta go for repair ,,replace,, and the trick is getting that back mount because the others will be a piece of cake,, anyhow enjoyed your wrenching video on this topic ,,thanks..👍

Good vid, thanks for posting it. Answered my question as to what I gotta do to replace that rear mount. 👍🏻

Absolutely excellent video. Thank you for making this. Much appreciated.

Holy Shit! Best car repair video I've ever seen. Explained everything that needed explaining, quick, and funny as hell. Watched this whole video, start to finish, and I don't even have a Camry.

Excellent video. LOVE that it's quiet. Will Subscribe just for that

Awesome stuff. Just got a 97 Camry I gotta do this on.

Awesome video dude! Keep em coming

Thank you for a very informative straight to the point video.

Excellent video and details!

Great video, doing a friends camry needed a quick video as to where the mounts are located and found your video. Thank you for sharing!

@MrMalzers

5 жыл бұрын

How long did it take you?

paling suka lihat tutorial dari fix it angel.....

I don't believe this XD I was checking my sound settings and my headset thinking i was muted. I was used to loud intros that are longer then movie trailers (ish lol) This truly was a straight simple DIY video I get tired of every 30 seconds of chatter and opinions on why they do this and not that and blah blah the others make it looks SO EASY i love how most are like so it comes out like this super easy. Your vids show you didn't do more prep work to make a perfect video XD all those bolts FOUGHT BACK!!! This look similar to the 2003 I have I will be using what I learn from you but I probably be grunting nonsense cuss words if I am not using my impact wrench XD Sub and liked!

You are the best DIY Mechanic on You Tube Gracias de video :) hola con allemanya

perfect full video, the best man

Great video man thanks

Thank you for the video, not many videos covering motor mount installation for this year model vehicle.

Had to thumbs up! Inspiring cause it wasn't second by second nor was it just pictures

Excellent! Love the video. Helps me a lot.

Excellent video, thanks a lot man! Wish me luck, I'm going in!

Love your videos buddy.

Again, very good video. Unless all four mounts are broken, you may need to loosen all of the mounts in order to raise the engine enough to remove some of the mounts (two of my four were broken). Fortunately the 2010 Camry has mounts at each wheel and none behind the engine.

Excellent video!

Bro! Mabuhay from Philippnes! paulit ulit ko pinanood tong video mo haha..dabest mechanic ka talaga! you should be proud of urself bro! Were proud of you too..we have a camry 2004 and having slight issues on engine whirring...might be the alternator..anyways, ur video is so damn helpful with matching ooh $|~|it, f@ck and oooh yes lol! Great video kababayan!

Your so funny. This video. Made my day. Thank you By the way. When I did my mounts. I said far more cus words. Than you thanks 👏👏👏👏

Thanks for this video you got a new subscriber 👍🏻

Great vid and great tools! Latest upgraded aftermarket top mount has some blue stuff that makes it last longer. My top mount dies every 2 yrs like clockwork on my rx330.

Hafa Adai just stumbled on your channel love the vids.

I watching and I learn more when I know how to replace like you.

I'm learning a lot thanks to you bro'

Awesome video, thanks very much!

sos masiso maje .. me la subes . yo quiero reparar mi troca pero asi como vos .y dejarla al centavo.. aquí donde me ves estoy aprendiendo..MUCHÍSIMAS GRACIAS MAN

Awesome video. Thanks man! 🤙

Great job! Very helpful video bro!

Very good. Thank you.

Good job bro good bless you and your family

Lol the "oh yes" you say when it starts moving is totally me 😂

MUY BUENOS VIDEOS AMIGO.... GRACIAS POR COMPARTIRLOS

Great Video brudda!

Nice work.

Holly molly, that engine support is really trashed....thanks for the video details.

For the rear engine mount, here are some tips: 1. remove the dog leg mount to allow your engine its full range of motion when you lift it. Leave the front engine mount and transmission mounts installed. 2. Cut a section of 2x6 wood (4 inch by 6 inch) and then drill a hole about 3/4 inch into the top face of the 2x6 wood. This 2x6 wood should not be under the pan but under the inboard CV joint that is part of the rear engine mount. I didn't like jacking up the oil pan as (a) it can damage the oil pan and (b) it was moving the engine backward (instead of upward) towards the firewall. 3. loosen the 17mm nut on top of the rear mount. 4. remove only two of the three 14mm nuts on the bottom. 5. Jack this 2x6 wood so that the bolt on the CV joint support frame enters into the hole that you drilled in step2. 6. remove the 17 mm nut on top 7. slowly jack up the engine until the top rear mount clears the 17 mm nut of the mount. 8. remove the last 14 mm nut on the bottom and remove the mount through the passenger side wheel well as in the video 9. wiggle the new mount in place, install the three bottom 14 mm nuts with only two or three turns each. 10. use a coat hanger looped in the bottom of the mount. 11. from the top behind the intake manifold, you can pull the coat hanger up to ensure that the top bolt of the mount goes through the mount bracket. 12. while pulling up the coat hanger to pull up the new mount so that the bolt on the mount is inserted into the mount bracket, 13. turn the top nut three or four times to make sure it's aligned with the mount bracket. 14. now lower the jack and the top nut is in while the three bottom 14mm nuts are all in place. 15. tighten as in the video.

@JohnEboyee

Жыл бұрын

Great tip on drilling a hole for the CV bearing housing jack point. I'm also a little weary of jacking at the pan even tho the manual says it's okay. The only change I'd suggest, is instead of fiddling with a coat hanger, hold the mount up so the top stud is in the bracket bore then slowly lower the engine. Positioned under the vehicle you'll have easy access to coordinate both steps. Thanks dude! Edit: forgot to mention that two screws can be used to back out the old stud if the new mount doesn't have one.

@pugchench4443

5 ай бұрын

Is there a video you recommend to watch that follows something to what you're saying? I gave up on mine because the engine was heading toward the firewall when I started lifting.

Excellent video. I could do the job, but it is quit involved, so I'm opting to have the dealer do it. Paying $650 to have 2 mounts changed, but fully expecting that they will tell me that all need to be changed.

Bu adama hayranım.

This is very helpful brother. Thanks

Nice sounds made vid 10x cooler

Good job man.. now my back kills me when I do that much body turning and twisting 🤓

Great video Angel.

It's easy works for the expert like you sir 😍😍

Great video! I’m replacing the CVs on my son’s Camry, and the passenger side CV is stuck in the bracket. The video gives me a roadmap to get it out. Thanks! 👍

@FixItAngel

3 жыл бұрын

Thank you David!! Be safe 👍🏽🤙🏽

Thanx for the vid angel

Nice job my friend.

👍piece of cake for you body...you're a magnificent technician. 👍

I must apologize for laughing at how many times you said shit. Sorry. I just had mine replaced on a 1999 Camry and the shop I normally use charged me $1500 for parts and labor. I thought I got screwed but after watching your video I have to say DAMN, I would NOT do that job for $1500. Great video, thanks.

Thanks Angel! Be Blessed