Amazing video, solved my problem a treat. Ended up using the end of a 5.5mm drill bit ground down to fit both the basket and drive gear perfectly. No more clutch noise! Thanks RB! ♥

@RestorationBiker

3 ай бұрын

Brilliant, glad my video helped. That is the best thing I can hear from viewers. Enjoy your riding.

Wow, what a video, fantastic job , one of the best explanation I have ever seen. I just bought one of these and I am going to restore it. Thanks again and keep making videos like this

@RestorationBiker

5 ай бұрын

Thank you so much for your kind comments. I am glad it helped you. I love doing videos like this, so it makes it really worth while when I get comments like yours. thank you.

Nothing like an old bit of mat for the workshop

@RestorationBiker

8 күн бұрын

Yes, indeed. It is now a 'minimum requirement' for me now

Thanks for the vídeo.

@RestorationBiker

20 күн бұрын

Brilliant, glad you enjoyed it, thanks

Hi, nice and tidy job !! Thanks , Gus

@RestorationBiker

Жыл бұрын

Hi Thanks, the bike is a totally different bike to ride with a new clutch in it.

Cracking vid, im about to strip down the clutch on a 92 600s i bought a few years ago but just left standing in garage, done a few jobs lately ready to take for mot but found engaging 1st, nuetral and 2nd gear difficult, ive tied back the lever and left for a few days but need to do the rattle pin anyway so will inspect clutch and change if necessary. This vid will be a huge help cheers

@RestorationBiker

Жыл бұрын

Hi, Thanks for the comments. It sounds as if you have a couple of plates sticking together. A good strip down and clean of all the plates will probably get it working perfectly again.

Good video pal just wondering what u used for the new pin

@RestorationBiker

Жыл бұрын

Glad you enjoyed it. I had a length of steel bar the right diameter for the pin. The only problem was I forgot to film me doing it, so I had to 'skip' over it. The bike runs superbly now with no more noise from the clutch basket.

Hi. Great video. Any idea if the FZS600 Fazer clutch rattle is the same problem?

@RestorationBiker

6 ай бұрын

Hi Chris, thanks for the nice comments. I love the Fazer. I very nearly bought a new one when they first come out. I have owned a couple of them since but they were secondhand. Great bikes. I love the gold paint scheme. The clutch is different on the Fazer. They do suffer from a clutch 'rattle' Normally this can be improved by doing a proper carb balance, as the clutch rattles if the carbs are out. If that doesn't cure it, then you need to dis-assemble the clutch and check the condition of the clutch basket and the clutch plates (the ears of the plates especially) Make sure that there are no 'burrs' on the basket where the plates contact the basket. If you strip it and want any other help, feel free to contact me and I will help if I can.

remember to leave 3 MM free space on the clutsh lever on the handlebar .

@RestorationBiker

Жыл бұрын

Hi, Yes you are dead right

Hi i have same noise with pin What you use for made pin ??? Thanks a lot. Welding wire can be 3mm?

@RestorationBiker

10 ай бұрын

Hi, you can use anything for the replacement pin, it just has to be the right size. I have seen bolts cut and used, I used a roll pin. That allows you to knock it it and keeps it from rattling around

@booda2552

10 ай бұрын

I used a 3mm Alan key, cut and rounded it with a file then hammered it straight into the pin.

@RestorationBiker

10 ай бұрын

@@booda2552 Hi, thats great. so long as it gets rid of the rattle eh!

I put my whole clutch back together right, And now the cable doesn't fit right, And the clutch lever when I pull won't make the clutch engage and work

@RestorationBiker

Жыл бұрын

Hi, yes, I know what you have done. On the top where the clutch cable fits onto the arm. You need to remove the small arm that is held by a circlip, and then re-position it in the correct position.

Расскажите пожалуйста, как заменили штифт? Что поставили взамен?

@RestorationBiker

11 ай бұрын

YA sdelal shtift iz kuska tverdoy stali. Kamera umerla, when ya sdelal pin

@user-yp3qb5mr1r

11 ай бұрын

@@RestorationBiker спасибо за ответ. Имеется такая же проблема. Сегодня буду решать её

@RestorationBiker

11 ай бұрын

@@user-yp3qb5mr1r Brilliant, good luck