I just brought one of these home a few hours ago and your video was great in showing me exactly how to use it. Skimming the instructions, I missed where it described the anti-splinter insert. It was nice to learn how to use this part.

I've used that was at work and it is a great tool, feels good in the hand, sturdy and it works awesome

Great demonstration of a very useful tool. Thank you!

@MasteringMayhem

3 жыл бұрын

Thank you. You’re very welcome 🙂

#2 on my favorite Dewalt tool list, i have a tip for new users of a jigsaw, you can snap a potion of the blade off before cutting if the stroke of the blade strikes material below or behind what you only want to cut. or when cutting just thin material like fiberglass or thin wood. sometimes the back of cabinets are to close to a wall or inside an auto and you need to cut an access, this helps.otherwise it will just bounce around.

@MasteringMayhem

3 жыл бұрын

Thank you for sharing that tip with us and thank you for supporting the channel 🙂✌️❤️

Great video, thanks for the opportunity!

I want one and need one....great video!👍

That is a great jigsaw. I have never used one, and didnt know it had so many different options of how to use it. Great video

@MasteringMayhem

3 жыл бұрын

It’s is my favorite Jig Saw yet. It was fun making the video. Just a smooth operation and the power is amazing. Thanks again for watching and supporting 🙂✌️❤️

Really nice dewalt would love to have

Congrats Ray, Marius is sending you a solid saw! I picked this up with the battery promo deal during the Holidays. The saw runs very well, and cuts extremely well. Run one of the newer 3.0 or 4.0 XR packs, and it will cut even better. It does run just fine with the 5.0 XR pack. 👍👍👍👍👍😁✌🏻🇺🇸

Used mine to cut a hole in the counter top for a sink. Worked great.

Thanks for showing us how to use Jigsaw, thanks for your time and video 📹 ,I appreciate you 🙏 😊 😀

This was my 4th and last tool that I have bought so far. To be honest I didn’t use much for a long time. I just wasn’t doing much woodworking where I needed to make curved cuts. And that is how I always viewed this saw. This was gonna be my go-to for those times when I needed to make a curved cut. I had to replace subfloor in my trailer due to mold and rot. I used to cut the advantech around the base of toilet and for the dryer vent. That was it for many months. Then I ran across some jigsaw vids on KZread and was curious if I could be utilizing it for more applications than I was. I learned that I was definitely underutilizing this saw. I love this saw for when you got those shorter 2x4. cuts that are awkward to make off of a table. The biggest advantage over those cuts versus a circular saw is that you don’t have to worry about dealing with the guards. The guard on my 6 1/2” circular always catches on those short cuts. So I either have to hold it open or rig it to stay open. At that point is where those shorter cuts start to get slightly sketchy. They become a whole lot less sketchy with that jigsaw. You don’t have a guard to deal with and it is LOT more narrower than the circ. Plus it’s so light you don’t have to have a table to make a safe and secure cut. It’s a little slower on the actual cross cutting but overall I don’t feel like I lose any significant time on those types of cuts versus the circ. And I learned a feature on that jigsaw from another video that really surprised me. You don’t have to drill a starter hole for your blade in most 1 by and smaller. It’ll make a plunge cut like you wouldn’t believe. So I have fallen in love with my jigsaw. Now that I’ve had the chance to work with it more. I think it is far more versatile than the 6 1/2 circ. As long as you not working with materials much thicker than 2/4s. So if I had to pick between the circ and the jig I’d have to say goodbye to the circ.

@MasteringMayhem

3 жыл бұрын

That’s a lot of good info. Thanks for sharing that 🙂✌️❤️

Awesome review. I bought one. What a great tool for my workshop!

Can't wait to get rid of the cord on mine

It is an awesome saw. I have used mine several times and it really does the job.

I'll been looking for a good jigsaw for home projects. This look like it does the job. New on tools here. !!!

@MasteringMayhem

3 жыл бұрын

This is one of the better ones out there. This good enough for pros so really great for home projects. Welcome to the Mayhem family. We appreciate all of your support and hope you and yours are well. Check out the power tool GIVEAWAY 🙂✌️❤️

@MIKELOVEPB

3 жыл бұрын

@@MasteringMayhem thanks . I will check the giveaway. I may be lucky to get started with the jigsaw 🤙.

7:58 "Let's do that one more time that was fun"---- the words of a man who loves tools AND his job. 💪

What a great jig saw, i can't imagine not to have one.

Nice review! Thank you . Question I saw in another video review that the blade lock actually flaps and can make the blade fall out . Only when backing out of the cut? Has anyone here have information on that ? Thanks in advance

Nice review. All questions and concerns answered, thanks.

👍🏻👍🏻👍🏻 can't tell you how my heart sunk when last GAW I heard the name Greg, but not me >?< 🤣🤣

@MasteringMayhem

3 жыл бұрын

I can only imagine. I’d probably react the same way. Keep watching and hopefully you’re name will be called. Two more Saturdays and we start a new GIVEAWAY.

@danieldelagarzaiii8603

3 жыл бұрын

another great video. thank you

Fantastic!

I really like the blade release latch. Thanks for the review.

@MasteringMayhem

3 жыл бұрын

One of the most user friendly latches I’ve come across yet. You’re welcome 🙂✌️❤️

Nice to see the new one. I’ve been eyeing it for a while

@MasteringMayhem

3 жыл бұрын

It’s a really great jigsaw. I love the speed selection and how the speed difference is immediately noticeable. I’ll be posting a video comparing this one to the Milwaukee M12 Jig Saw soon. 🙂✌️❤️

Man i want this thing too i have the barrel grip and love it for long sheet goods

very helpful and informative video, thank you very much.

Thank you always for the great recommendations. I just finally received my sweet Dewalt Impact Driver kit your recommended from Fasteners, Inc.!

@MasteringMayhem

3 жыл бұрын

You’re very welcome. Nice, that’s a great set. Enjoy it. Thanks for supporting the channel and we hope you and yours are well.

@rjfree7169

3 жыл бұрын

Which impact did you get, was it the 1/2” by any chance?

@mastering mayhem Which tools are most important in acquiring for DIY? I don’t have any cutting tools yet. Just an angle grinder, drill, impact driver, impact wrench.

@MasteringMayhem

3 жыл бұрын

For all of the DIY work I’ve done I have used the Recip Saw and Circular saw the most. The job saw was the 3rd most used for me. I also have a 3” cut off but I use that very rarely. So I would put them in that order of use or importance.

@cjarloz

3 жыл бұрын

@@MasteringMayhem thanks

Got one of those with the drill/driver kit with 5.0 battery for my pops not sure how he likes it yet

@MasteringMayhem

3 жыл бұрын

You got him some great tools. I’m sure he’s enjoying them 🙂✌️❤️

Congrats Ray

Another awesome review. I also have this saw. Got it for free with a Home Depot glitch.

This jig saw is a beast...

@MasteringMayhem

3 жыл бұрын

You’re DeWALT drill is on its way. Should be there by this Friday. 🙂✌️❤️

@christianh2o252

3 жыл бұрын

Thanks brother... I’m looking forward to it!

That saw is a beast. Keep killing it MM.

Looks like a nice item. See you Saturday.

QUESTION.............If you mark your wood with a pencil to cut..Can you see to follow a line with the jigsaw........

@MasteringMayhem

2 жыл бұрын

Yes

Nice job MM.

@MasteringMayhem

3 жыл бұрын

Thank you. Glad you enjoyed the video 🙂✌️❤️

Great Video.

@MasteringMayhem

3 жыл бұрын

Thank you. Thanks for supporting the channel. We hope you and yours are well 🙂✌️❤️

I love your work gloves. What brand are they?

@MasteringMayhem

3 жыл бұрын

Those gloves are actually my old motorcycle gloves. The brand is Scorpion. But they have good protection of the knuckles and good padding on the palm and very flexible and lite. Not very rugged but very useful and comfortable. Here’s the link to the exact pair if you’re interested: amzn.to/3rcR2AO

335 best

Please let us know when this baby is on sale, can't wait to own my own

@MasteringMayhem

3 жыл бұрын

Will try to keep an eye out for it. 🙂✌️❤️

😆🍻🍺😊

After watching this 8 refuse to buy a dewalt. 1,2,3,4,5,6,7 oh my god. Lousy review. Need a carpenter to do this. A real sleeper..hate d handles...