I had one of these demons as my first bike... brings back good memories to see you working on it. Thanks for sharing!

Just finishing up my 2008 yz450. Motor was a few rides away from grenading. It's been a bit of a battle. On top of a full rebuild it was neglected in almost every other way. Almost every bearing, seal, cable needed to he replaced as well as bunch of other little things. But there is nothing better than bringing a bike back from the dead.

@conwaymildon4411

2 жыл бұрын

I brought the exact same bike a few weeks ago with the intention of rebuilding it but it turns out it had a major rod failure completely snapped the balance shaft in half and destroyed the casing. these model engines have a large oil cavity around the crank and if something comes loose inside normally it gets smashed to bits. its been an expensive build so far but ive learnt so much from it

@Davido50

2 жыл бұрын

Yes!

@Davido50

2 жыл бұрын

Great job you have an awesome bike ..built by you! Be sure after break-in at 1st oil change to get a quality full synthetic motorcycle oil in it. 10w40. Maxima Pro Plus or Mobil1 4T racing are hugely popular! #Maxima

Sick Rebuild!!

You are a great mechanic!

Another awesome rebuild, heck yea bro

@Benjamminoutdoors

4 жыл бұрын

Jonathan Bizilia thanks bro!

Big shout from Scotland awesome as always bud

@Benjamminoutdoors

4 жыл бұрын

Whatttt up, Thanks bro!

This one came out sick!!!

@Benjamminoutdoors

4 жыл бұрын

Built From The Bottom thanks bro! Definitely one of my most favorite builds!

A "back yard mechanic" you may be Benjammin - but your skills and attitude would put many professional mechanics to shame! A fantastic build and transformation - thank you as always for sharing!

@Benjamminoutdoors

4 жыл бұрын

Lol thanks bro!

Awesome job!!!!

Nice work 🤘

😮😮that was pretty cool when you was testing the motor never knew you could do that

Yamaha YZ 4-STROKES are excellent bikes & well worth the time & $ to fix w/finest parts!

Awesome as always bud great job. Would love one of your bikes. Usual big shout from Scotland 👍

I have the yz250f 09 in the white and it’s an awesome bike

I noticed you hitting the bearing in with a mallet. I learned from others to use old bearings to tap in. Perfect size without the risk of damaging new bearings.

Well done sir well done!!!

Excelente job

Nice work 👌

Just amazing

Really nice job like ever bro, it was insane, cheers and blesses

@Benjamminoutdoors

4 жыл бұрын

Thanks!

Perfect🐐

Oh wow! Such rebuild, much fix, very bike

Good job. Only suggestion is if you are going to drive the new case bearings in by hammer, then atleast use a bearing/seal driver to do so. Preferably one that is brass or aluminum. Do nice centered flat blows. And oil them ever so sligtly around the race edge and case mating surface. Also if installing some other way than i described you should do the best you can to focus the driving downward of the bearing by tapping around only the other race. Our evenly across the whole surface. If u drive it in by the inner race you can chance completely destroying or badly damaging the integrity of the bearing and may not even see it realize it until its to late..

@Benjamminoutdoors

Жыл бұрын

Thanks for the advice, I’ve learned a lot over the past few years and since then I’ve bought lot more tools for the job. This was my first rebuild and I made a lot of mistakes.

My bike is next what time and location lol...good job bro nice video I enjoy watching this

Fantastic job! (and video) Thank you for posting it!

Good job. Just a little tip for Installing bearings is to freeze the bearing and heat the case and you will never have to beat them in with a hammer

@Benjamminoutdoors

3 жыл бұрын

I did freeze bearings and heat the case and still had to use the hammer.

A little bit late but damn what an awesome rebuild! Seems like the previous owner liked to beat the s**** out of that engine, incredible...

Great vid! One question though, what did you power up the headlight to?

@Benjamminoutdoors

4 жыл бұрын

I got a battery pack.

Buen video capó. Saludos de 🇦🇷Mi duda es de donde sacas electricidad para el faro de luz

i didnt think that light bar would look good, but SHEESH!

@Benjamminoutdoors

3 жыл бұрын

Yeah It looks really good coming through the number plate!

I’m doing the same thing to my yz450f guy before me blew the crank on it

I have a 2o19 model really nice machines

Did you say T6, as in Rotella T6 oil?? when you were lubing the cam and timing chain?

Not a big fan of spoke covers, and a restyle front fender would really set it off... Ask me how I know. lol. What was the total spent in fixing it up?

Did you use 3000 paper when you got into your swingarm

How many pounds of torque are given to long screws?

Very solid build hopefully i can pickup a 450f project like this soon. Thought i bought a deal on one but seller doped me and sold me a 250 lol

@iltgpatged

3 жыл бұрын

you don't need to have a bike if you cant tell the difference between a 450 and a 250

@HolyShitAccess

3 жыл бұрын

@@iltgpatged yeah didn't notice the upped sprockets when i test drove it. You are right, I'll stick to the 150's.

installs sylinder and piston whitouth oil, thats good for sure..

@Benjamminoutdoors

2 жыл бұрын

Yeah that wasn’t good. I lubed everything in the bottom end but failed to lube the piston definitely a dumb mistake.

Little late to the party, I have an 08 250f and bought it with those exact same graphics on it. After some time they started to peel. I’ve been looking for them for months across different websites. Did you get them off of eBay?

hey man how much did you pay for a new set of cases?

Awesome rebuild! You gotta get the TDC before kicking hard and wasting your energy

@joski9030

3 жыл бұрын

Just past and you can do it in slippers

Spoke covers ain’t it and grips are cheap that’s my only quarrel other than that love watching you bring an old beast back to life

Did ya lube the cylinder and check ring gaps? Great vid btw.

@Benjamminoutdoors

2 жыл бұрын

I did not, those were some mistakes I made.

Nice job. Where did you get your headlight from? Was it plug and play, or did you have to splice wires to get it connected? Im looking for a headlight for my yz450fx and that looks like a great solution. Thanks!

@Benjamminoutdoors

4 жыл бұрын

Thanks! The led bar is from eBay and had to get an external battery pack and wire everything thing. This specific yz450f apparently couldn’t fit a stator with a auxiliary power for light on it so had to go with external source, which I bought a “dewalt battery power dock” on eBay for like $16

@judah8078

3 жыл бұрын

Ya

@judah8078

3 жыл бұрын

Ya

Nice

Where did you get these graphics they give the bike a clean alternative oem look

@Benjamminoutdoors

3 жыл бұрын

Thanks! eBay

How did you get the cam chain to go on so easy. With an oem chain and the tensioner removed its still tight

@Benjamminoutdoors

2 жыл бұрын

You kind of have to put one cam in at an angle, it’s a little tricky

Wait what? You just pull the seal down farther or something in the forks? If they are deteriorated tho, it will start leaking again

@Benjamminoutdoors

4 жыл бұрын

The biggest reason for forks to leak in my experience is been stuff between the seal and the fork tube itself, like dirt which causes the leak.

Hey I just bought a 450 and I was just wondering what years is the front fender and plate

@Benjamminoutdoors

4 жыл бұрын

This is a 06-09 body style, I’m not sure what other years it’ll fit.

Where do you bought that red levers?

@Benjamminoutdoors

7 ай бұрын

eBay!

I hope you didn’t forget your cylinder coolant dowel and oring. Looks like u didn’t put it in

@Benjamminoutdoors

4 жыл бұрын

I didn’t, don’t worry lol

Where did you connect the light please?

@Benjamminoutdoors

Жыл бұрын

I didn’t yet, I was going to wire it into an external battery pack system.

Anybody else lose sound at the endish of the video

hi, can you just tell me what was the link or name of the light that you mounted on

@Benjamminoutdoors

3 жыл бұрын

Not sure but it was just some eBay 7” single row led bar.

Im a beginner interested in purchasing my first dirt bike. debating whether a Honda crf 230m or ktm and yamaha. Any help?

@Benjamminoutdoors

2 жыл бұрын

The quick answer is Japanese (Honda, Yamaha,Suzuki) they make great bikes, But ktm is nice too. Biggest thing is just doing maintenance on it regularly to make sure it runs good for a long time.

@RWarrior777

2 жыл бұрын

@@Benjamminoutdoors thanks

Maybe look up the correct way and order to tear down and rebuild. You apparently have the tech manual. Top end should be the last thing to come off. And use a bearing press for removal and install- never a hammer.

@Benjamminoutdoors

4 жыл бұрын

Have you rebuilt a dirtbike motor like this? You HAVE to remove head first and install last and you’re right I should’ve used a press but I didn’t have one.

Can u help me rebuild my Yz450f 09

Dude you just need a white seat cover and then you’re golden

Well done! Shame about the chain though...

@Benjamminoutdoors

4 жыл бұрын

What do you mean?

@PabloConcrete

4 жыл бұрын

@@Benjamminoutdoors Not big fan of this red chain, would like better in normal colour combination.

@Benjamminoutdoors

4 жыл бұрын

czerwiec04 I got you, I was just going for as much red as I could I wanted to do all the engine plugs red as well but the kit was like $300 for a couple anodized red pieces 😂

Hi where did u order the parts from

@Benjamminoutdoors

Жыл бұрын

eBay!

@gwade8808

Жыл бұрын

​@@Benjamminoutdoors what crank did you go with? I see ebay has hotcams and wysco. How's it holding up?

How many pounds are given to screws holding the head and cylinder?

@Benjamminoutdoors

3 жыл бұрын

I can’t remember, if you Google it you can find it

@carlosperaza2893

3 жыл бұрын

@@Benjamminoutdoors All how many hours do you give me service to your bike?

I wonder why there are so many different bearing installation tools out there? When you can obviously just use a hammer or mallet, I mean, everyone has a dirty old persuader lying around somewhere.

@Benjamminoutdoors

2 жыл бұрын

lol I’m not in love with the hammer way… I much rather have a press lol.

How much it cost you?

@Benjamminoutdoors

2 жыл бұрын

Way too much lol

Total cost please??

@Benjamminoutdoors

3 жыл бұрын

A lot 😂

Crank bearings are ruined never hammer them in and that cam chain is junk

Some one can help me buy motorcycle like theis please

Just a question.... Why buy new plastic, when there's nothing wrong with the old ones? Again just a question

@Benjamminoutdoors

2 жыл бұрын

Because they’re very dirty and very scratched The whole point of the video is to restore it.

@evasanders7327

2 жыл бұрын

Oh.... So too lazy to clean and restore them... That was all you had to say.....

@Benjamminoutdoors

2 жыл бұрын

@@evasanders7327 Yup exactly, the plastics are cheap what can I say. And are you not gonna respond about the YZ? Did you Google it yet?

@evasanders7327

2 жыл бұрын

@@Benjamminoutdoors lol.... Anyone can do what you do... Buy the parts and put them together... A true restorationist uses what is on the bike and repairs and restores them...... Call it what it really is a factory rebuild....

@evasanders7327

2 жыл бұрын

@@Benjamminoutdoors check out the channel "Restoration channel" that is what a real restoration is like... And who doesn't have Google and still I didn't need it to know this...... You should change the channel name to idiot rebuild channel.... Just saying

I have mixed emotions... I appreciate they rebuild video, but maybe I’m missing something. Did you check the shims after you tried kicking several times and turning the engine over with an impact gun or was the video editing wrong? And the carb should definitely have been looked through before kicking the bike over, I mean you were starting with a bike that had debris inside the head... Thanks for your efforts, I know doing this is not easy, but a disclaimer to viewers may keep some from making a mistake if they are trying to learn. Good luck in the future!

@Benjamminoutdoors

4 жыл бұрын

Yes I did a valve adjustment, went through carb and the head was clean and I showed all that in the video.

Nice job, but you shouldnt be reving the bike so much till the engine is broke in

@Benjamminoutdoors

4 жыл бұрын

depends on who you talk too about break in technique, But it doesn’t help I’ve owned this for over a year and was dying to ride it finally.

@beamngnation9494

4 жыл бұрын

@@Benjamminoutdoors reving too much can twist the rings and destroy it, may cause scoring on the cylinder wall too

@christianhubbard3197

4 жыл бұрын

after going through heat cycles it doesn't matter

@Benjamminoutdoors

4 жыл бұрын

Nícolas Piano I’m well aware of what can happen. And while it looked like I started it up and immediately ripped the throttle, me driving it was not the same day as me cranking up the first time.

Dont wast ur energy kickint it like that, find the TDC first

$700+ for the rebuild and you couldn’t spare $30 for the case gaskets?

@Benjamminoutdoors

4 жыл бұрын

From the factory they do not come with the gasket between the main cases, so I do not put one between the cases because that can ever so slightly put my connecting rod off center and can potentially not let my cylinder jug fit on properly. if you don’t believe me you can go to the Yamaha parts and look at the images, all the covers have gaskets but the main cases do not.

junk it befor you get to deep

Do not do that to your forks that’s a temporary fix and they will just go bad again just rebuild them

@Benjamminoutdoors

4 жыл бұрын

Why not? It doesnt cost anything and doesn’t hurt anything. I’ve seen fresh rebuild forks leak after ridding some so I’m not ganna spend the extra effect if this works just as well.

@britmaster1775

4 жыл бұрын

But it doesn’t work as well I destroys my forks doing that but that’s what happens to me

@Benjamminoutdoors

4 жыл бұрын

Britmaster 1 Every time I’ve done it it worked well, and if it doesn’t work then I’ll do the forks seals but it doesn’t take much time and doesn’t cost any money so why not try it first.

@britmaster1775

4 жыл бұрын

What ever works for you it just hasn’t for me sorry if I came across mean I’m not trying to be by the way love the video I’m buying a 450 soon

@Benjamminoutdoors

4 жыл бұрын

Britmaster 1 nah you didn’t, and nice! It’s crazy power out of these 450s!

Also that is not a YZ.... All YZ motorcycles are 2-stroke cycle engines.. and that's clearly a four stroke cycle engine. Just saying.... lmao

@Benjamminoutdoors

2 жыл бұрын

Lol Google is free bro. Google YZ450f…..

@evasanders7327

2 жыл бұрын

I'm not a bro.... And I've rebuilt motorcycles since I was 10..... I don't need Google to know a YZ motorcycle doesn't have a camshaft or standard valves they have Reed valves..

@j.james-88

Жыл бұрын

@@evasanders7327 Lol you obviously have no idea wtf you're talking about.

You overpaid at $600

@Benjamminoutdoors

3 жыл бұрын

I know that now lol I didn’t know it was as bad as it was