Top Speaker Plate: 220mm x 180mm . . . (8.5" x 7.0") Tilt Angle: +/- 10 degrees Clamp Width: 1mm - 50mm . . . (0.04" - 2.0") Height Adjustment: 235mm - 280mm . . . (9" - 11") Weight: 1.4kg . . . (3Lbs.) Maximum Load: 100kg . . . (220Lbs.) NOTE: The load limit is dependent on the quality of the surface the stand is mounted to

This is a game changer, especially saves space at the minimum!

have them haven't installed mine yet but man its going to look legit like the feel of them really strong and not cheap

Using ADAM A7Xs with these for a standing desk, feels wobbly and unsecure. Would've loved it if there was a little bit more material over the desk, so that the center of mass was placed more over the desk for less wobble. Hopefully won't be a problem in the future, but if you buy them you should be aware that they could be better. I'll be checking them every now and then to make sure they're not loose, and will be looking for more secure ones in the future.

@everythinginfamous1588

3 жыл бұрын

Any feedback so far? Also looking at these for a standing desk.

@keglerx

3 жыл бұрын

Yet to buy as Im using motorised standing desk, kinda worry it would wobble and topple over when i raise the table. It would have been better if it has some kind of clamp on the speaker itself

@ags911

Жыл бұрын

@@keglerx could just install large Velcro pads under the monitor.

You didnt make the top platform fully rotatable or you would have had a customer here!

I want to modify these so I can increase the tilt angle and put my xdj 700s on them. Anyone know if that's possible? Or know of something almost identical that tilts more?

I'd feel more comfortable if they had a lip to hold the speakers. My desk is on castors... if I rolled out the desk, they might just drop.

I want to order these, but your website says I won't get them until October!

doesnt really look like its decoupling from the desk surface though

These look slick. I'm looking to mount my studio monitors to the SIDES of my desk. Do the tops of these stands swivel/rotate?

@Valentin-jx9rs

2 жыл бұрын

did you get the answer ?

@yourbackporch

2 жыл бұрын

They don't, only big negative for these clamps

Ship to Canada? Pretty Please!? Would rather get directly from you than a reseller

I bought a similar pair by Millennium about 3 yrs ago for my KRK Rokit 5’s and took them off because there was too much wobble. I tried my pioneer DJ’s on these as they’re much smaller and had exactly the same issue. Also the height adjustments don’t come out of the holes so I can adjust the height. The rubber covering is made too small to stay across the whole stand and keeps coming off. I paid a lot and waited ages for these to arrive from Germany to the UK. Big disappointment and too far to return them so now 3-4yrs on I’m looking to sell them. I was hoping someone would be able to advise me how to get the height adjustment working. 😂

Really cool design! I have one question: Can I use these if my desk is against a wall?

@DifWrld

4 жыл бұрын

Sweet I’m late but you can just put them on the side of the desk and angle them to the middle

@ubacow7109

4 жыл бұрын

I'd imagine it depends how close it it to the wall, if its flush then u wud need to move the clamps to the side of the table instead

@g3o5d

4 жыл бұрын

Not for use with "Rear Ported" Speakers . . . Unless you mount them on the Sides of you desk.

any US alternative, or amazon alternative, shipping these days from UK is hard, what about if is something wrong and you have to send it back?

@Dougie-

4 жыл бұрын

If I was in the US I'd get the Sound Rise Pro instead. Unfortunately since I'm in Europe the shipping is way too much.

@boris.grinshpun

2 жыл бұрын

Gator Frameworks Desktop Clamp-On

Price with shipping is comparable to the Gator Frameworks Clamp-On Studio Monitor Stand (GFWSPKSTMNDSKCMP) but, I feel these are better constructed. Granted the Gator is a larger stand for bigger speakers and right now the Gator is running $99 on Amazon. I would say they are a bit overpriced from a US perspective based on the size of the speaker they will support. Shipping for me to Texas was $25 with a price of $75 USD ($100). I have Presonus E3.5 studio monitor speakers and should work well with them.

anyone know if these work with the KRK Rokit 5s?? really thinking of getting them but not if they're wobbly!

@charlottedriweave937

Ай бұрын

I bought a similar pair by Millennium about 3 yrs ago for my KRK Rokit 5’s and took them off because there was too much wobble. I tried my pioneer DJ’s on these as they’re much smaller and had exactly the same issue. Also the height adjustments don’t come out of the holes so I can adjust the height. The rubber covering is made too small to stay across the whole stand and keeps coming off. I paid a lot and waited ages for these to arrive from Germany to the UK. Big disappointment and too far to return them so now 3-4yrs on I’m looking to sell them. I was hoping someone would be able to advise me how to get the height adjustment working. 😂

Can it carry the weight of Yamaha HS8?

@jaimeaguirre4424

4 жыл бұрын

I'm wondering this too

@irmarodriguez8376

3 жыл бұрын

Did you ever get it? I also have Yamaha HS8

@PrestigiousP

3 жыл бұрын

Get the gator frameworks speaker desk clamps they can hold the hs8 and even have a lip to stop the speaker moving

Can the platform be rotated also? Otherwise they'll point straight ahead and not directly towards you or your ears.

@3st90

4 жыл бұрын

They don't rotate, bit you can clamp them to your desk at an angle. Works just fine.

@JasonChinniansoulmod1

4 жыл бұрын

@@3st90 thanks.

@0verkilla

3 жыл бұрын

@@3st90 Does it work fine tho? I'm just testing them at the moment and if you clamp them at an angle, the stability is kinda poor in my opinion ):

@3st90

3 жыл бұрын

@@0verkilla Are you sure that's nothing to do with your specific desk setup/shape? I have mine clamped to my desk at a slight angle so they point towards me, maybe 20 degrees or so. Looks a bit like in the video, except for the straight edge of my desk. Zero issues for me, the stands are rock solid. That's all I can say unfortunately, sorry to hear that they're not stable enough in your case ):

@0verkilla

3 жыл бұрын

@@3st90 Around 20 degrees (picture for reference: i.imgur.com/KnJ3Hpk.png) is what I would say is my threshold for a pretty stable clamp. If I go any further, it starts to feel pretty clunky as the clamp does not have enough desk. My problem is that 20 degrees is far from enough, I need around 45 if not more if I want my speakers pointing towards my ears :l . I've found other stands if there's anyone on my situation > kzread.info/dash/bejne/YnWGpI-MnNrAkrg.html

Can they go as high as 22 inches from desk to bottom of speaker? I got a 3 monitor setup and want the speakers to point down from behind the monitors

@JeremiahHawkins

3 жыл бұрын

They go up to 11 inches. www.gear4music.com/us/en/Recording-and-Computers/Desk-Clamp-Monitor-Speaker-Stands-by-Gear4music/2SIC

@InfinitiV35

3 жыл бұрын

I’m in the same boat as you

@TheBojangelz

3 жыл бұрын

you figure it out? I'm tryna do the same thing right now

@mpresto15

3 жыл бұрын

@@TheBojangelz I bought floor speaker stands but couldnt get the angle right with the huge speakers i bought. Ended up with stageek speaker stands and stacking my monitors to save space

@TheBojangelz

3 жыл бұрын

@@mpresto15 ahh, thanks for the reply! Looks like walls mounting is the way I’m gonna have to go eventually

Anyone have these with 10Kg speakers on them? I'm afraid these will get lose and drop a speaker to its death...

"no more need for big floor stands" -- but isn't decoupling from the desk better?

@mrkinetic

4 жыл бұрын

Not in my case. I use a standing desk which can go up and down.

@Aquamaui.mp4

3 жыл бұрын

@@mrkinetic same. Are you happy with desktop clip studio monitor stands? Are thay stable enough? cheers mate.

Ditch all the unnecesary articulation. articulation and rigidity != cheap. That's because it means you need very high precision manufacturing processes.

these are completely useless, make the speaker plate rotatable so the speakers can be pointed where they needs to point. would buy if so.

Great concept but dangerous for the monitors incase over time the clamp becomes loose

@jabezhane

4 жыл бұрын

Maybe a drop or two of threadlock?

@Wyd4

4 жыл бұрын

@@jabezhane yeah, or check it once a month? :)