Designing the Ultimate Gaming Rig
Ғылым және технология
Start configuring your next custom gaming PC with NZXT BLD at nzxt.co/JayBLD...
Get your JayzTwoCents Merch Here! - www.jayztwocen...
○○○○○○ Items featured in this video available at Amazon ○○○○○○
► Amazon US - bit.ly/1meybOF
► Amazon UK - amzn.to/Zx813L
► Amazon Canada - amzn.to/1tl6vc6
••• Follow me on your favorite Social Media! •••
Facebook: / jayztwocents
Twitter: / jayztwocents
Instagram: / jayztwocents
SUBSCRIBE! bit.ly/sub2Jayz...
Пікірлер: 2 200
Please don't feel guilty. This is your passion. I and many others live vicariously through your builds. You can't control the component supply issues. But if this makes you happy, go for it, overkill the hell out of the build. Can't wait to see the case choice. This excites me. Can't wait to see the results of the new build. GG. 😊
@AsukaLangleyS02
2 жыл бұрын
You live vicariously through other people? Is that what's wrong with our world today? People living through others...
Absolutely no reason to feel bad. I allow myself to live through you, in these times of suck for a PC-builder. To see that someone can still put together a great system makes me feel better.
@milkteeth6937
2 жыл бұрын
exactly this
@Krauser1226
2 жыл бұрын
Yep, same here. Vicariously enjoying all of it.
It's actually refreshing to watch this kind of build video, exactly because of the shortages. It's a great reminder of what we have to look forward to again when on the other side of all of those challenges.
Since you're going with overkill and the best of the best, my vote is for what many have called the best of the newer cases, the Fractal Torrent. Plus it would fit the color scheme really well.
@Scragg-
2 жыл бұрын
I think that is a great match to the board that he is using!
128gbs of ram is overkill for gaming, so is 2 3090s, with that being said I feel like you should do both just because you can. You personal rig has always been over the top and I believe that's what defines you the most.
@dustinwellman2889
2 жыл бұрын
Fax
@Jousten16
2 жыл бұрын
Also only 2 sticks always looks stupid with the gaps. 4 sticks or nothing!
@nanoflower1
2 жыл бұрын
Yeah, I went for 32GB in my new build which is more than needed for gaming, but I also use it for heavy browsing with lots of tabs open and development. So it will get used as I managed to always get close to full with my old system at 24GB of RAM.
@jeremykiel8799
2 жыл бұрын
He should definitely do dual 3090s I go to microcenter a decent amount & in my area they usually have 3090s in stock cause no one wants to buy them for 1.5-2k
@chadbizeau5997
2 жыл бұрын
@@nanoflower1 I think 16 is starting to get tight. 32 is a pretty good sweet spot considering ram (DDR 4) is relatively inexpensive for 3200/3600 speeds
Finally! so glad to see you doing what you love again. I haven't been able to buy or build a new pc but that doesn't mean I stopped loving seeing you and other Techtubers building rigs keep up the great work Jay never let the haters make you stop doing what you love, Cant wait to see the rest of the build.
The Fractal Torrent is a beast of a case, I really think that has the right aesthetic for your build.
I've never once felt as if anything you've used in any of your videos is MY component that you took out of my hands. This is not an issue you created. Never feel bad for for the knowledge you provide by doing these videos, keep up the great work!
Don’t feel guilty. I’m excited to see this come together personally.
@EternalTotem
2 жыл бұрын
Same
@ashtontlr304
2 жыл бұрын
Same
@antoniocarlosflorenciodasi6490
2 жыл бұрын
Same
@BRB499
2 жыл бұрын
Hell yea
@yhprumhsoj
2 жыл бұрын
Same
Custom case! From scratch and your wildest imagination. You could make a case that fixes everything you always wanted to
@russellpickett6292
2 жыл бұрын
Hell yes, reach out out to a machinist and have something custom built.
@jayaskme2942
2 жыл бұрын
Was literally my first thought when Jay asked for case suggestions too ;-)
@norad64
2 жыл бұрын
The JayzTwoCase
I don't know why, But I feel the need to bing more JayzTwoCents. I move away and my brain keeps saying must watch more of Jay's videos. Love the passion, love the humor. Very informative too. Being a tech guy for over 20 years now. I love a channel that's tech heaven.
As a Singularity Wraith user, I'd tell you to use the Spectre. The clean, clear and elegant result of a build in those cases is simply outstanding. Plus, the water-cooling gets super easy and convenient.
Well Jay, since you mentioned that the board has an E-ATX sort of width, I'd suggest the Fractal Torrent. Great case with lots of room to play around in, I think you'd love it and would sorta fit the "Different but classy" sleek black/silver theme you've got going on.
@SuperFiets187
2 жыл бұрын
Agree, I actually use the same case and I love it! Looks sleek, cool and still classy. Also would love to see a watercooled build in that!
@DBRONCOSfan
2 жыл бұрын
I have the white Torrent with a custom cpu and gpu loop. It was surprisingly difficult to design the layout and bend the tubes. The side rails to use smaller fans on the front takes a lot of space. Still would be sweet to see Jay's rendition.
@swagbrew
2 жыл бұрын
@@SuperFiets187 Torrent is designed for air cooling, so doing a watercool loop in that would be kinda pointless, there are much better cases for that.
@kelvinsullivan1126
2 жыл бұрын
Yes that case is awesome
@DBRONCOSfan
2 жыл бұрын
@@swagbrew Watercooling still uses air though. Good flow through the radiators make a difference. Fractal even include radiator and reservoir placements in the manual.
Just appreciate you sharing your knowledge etc.Its given me a nudge to try and build a PC next year for the first time.
@Heero_effect
2 жыл бұрын
Just have jay build you one ;)
@thethinker247
2 жыл бұрын
@@Heero_effect wouldn't that be something
@alexanderballance2996
2 жыл бұрын
Good luck with your build! Jay also inspired me to build my first and I don’t regret a thing.
@VNM_Arma
2 жыл бұрын
Good luck with your build man!!! hope it turns out stellar
@seen3804
2 жыл бұрын
it’s not that hard. just dont drop your. CPU in hard, and the biggest pain in the ass will be always be the cpu cooler
Thank you for using "borked" ). As the inventor of that word, I'm quite proud that it has moved through the IT sphere so easily and been so thoroughly understood :).
Thank you Jay. your comment about PCI lanes and GPU/M.2 slots sharing bus bandwidth helped me decide on spending a little more for a larger single SSD to replace my current one, rather than saving a little cash by just adding a second one.
Love the overkill build , thanks for going old Jay style
Don't feel guilty about getting the PHATTEST PC you can get my man! It's awesome to see these things come together and when you're gonna use it as a personal PC I say you have every right (as if you didn't regardless) to go extreme with your builds! If people have a problem with that, they can go sulk in a corner somewhere! 🤨 Keep up the awesome work, and maybe Nick and Phil need upgrades as well? 😏
@iftekharsafi4861
2 жыл бұрын
You do know people won't be always this frustrated if the gpu situation was like before soo now if someone gets hardware like this for free then it is obvious for people to go mad
@RobertForslund
2 жыл бұрын
@@iftekharsafi4861 So stop watching then if it makes you so damn mad... 🙄 Jay runs a tech channel where he test, reviews and muck about with new and interesting technology! So you rather he make no content at all just because it triggers some people? Gtfo here... 🤨
@iftekharsafi4861
2 жыл бұрын
@@RobertForslund I love him to dearest I am not the one who is mad bro I just said I get the incentive for people to be a bit frustrated not being able to buy a gpu no matter how hard they try and him there enjoying all this stuff .I myself am saving every dollar I can to buy a rtx 3060 but seems like I will die before I do that
In regards to your last video, asking what the audience wants; I want more video's shot by Phil. You two have great chemistry when filming and it really enhanceds video's to be more light hearted and funny.
Given all the current supply shortages etc and your earlier video regarding content, I would love to see you guys make a case from scratch for this build. Using your model skills etc. I find those videos of yours some of the best at the moment in this desperate time.
That Lian Li Oddessy is a gigantic beast, might look nice
"Unnecessarily Overkill" You sir, are my inspiration for my build.
I enjoy seeing someone being able to live out their passion. It gives me joy. Don't ever feel bad. We're very happy to have you do the stuff you do! Also the 3090FE is a beautiful card as it is, but man.. the memory temps on that thing, especially the back.. are just absolutely at the limit. A waterblock with an active backplate on my 3090 made a huge difference in memory temps, easily 30°C.
I always love the unexpected explosions in the video's, just like the one at 5:20 💥😄
only watched the first 15 seconds so far and I love how fast you took and applied feedback. It wasn't my feedback but I don't care, its refreshing to see people do what they say. Not that you have ever shown to do the opposite but its still nice. Thanks Jay and team, keep up the work and I hope you have fun again soon. It shows in your videos when you're genuinely happy and its just a better result. Have a great holiday season! Anyone whining about not being able to get or afford these parts, just stop. Jay probably doesn't get the perks you get from your job, its just a reality. If you don't like your reality.... change it and until you try, stop complaining.
Heckin' yes, Jay will have a new computer in about a year at his personal build rate. LMAO just kidding, kinda, you're doing great man.
@joeschmoe5009
2 жыл бұрын
Youre not wrong! By then new hardwares out, time to rethink the build! Haha. Keep up the hard work jay!
@dskrilla17
2 жыл бұрын
Personal builds are special. They have to be just right!
@indigocurse5281
2 жыл бұрын
@@dskrilla17 I'm aware. It's an ongoing joke on Jay's channel, he always back burners his own builds for new videos and other builds. Just keeping the joke going.
@mysterymayhem7020
2 жыл бұрын
he'll get it done for next year, which is only a few weeks away. (depends on what year he is thinking about though)
@indigocurse5281
2 жыл бұрын
@Lester Crest yes, do you remember alot of the hang ups on that build? Supply issues, delayd in communication back from P.M. the reveal was delayed due to touring and those communication delays as well
It was quite refreshing to grab a coffee, sit down and watch this video. Content, exactly like this, is what made me a subscriber to your channel in the first place. As others have already mentioned, there’s absolutely no reason to feel guilty for using components you have access to. I’m loving the “back to basics” approach of this video and I’m looking forward to the next one. Thanks for posting!
Jay there's absolutely no ways I could ever afford the ultimate builds you do. Just as I know lots of friends who can't afford to even have the potato PC I have . But watching you put them together puts a huge smile on my face 😊. You like everyone else in life deserve to make yourself happy ...keep going brother .much love from South Africa 🇿🇦
@kurt_styloe
2 жыл бұрын
bro, i got the same msg. did we won something??
Thanks Jay - another great video! Thanks for taking the time to talk through the thought process behind some of those decisions you're making - that's the kind of analysis that I find really useful! As for a case, have you ever thought of doing a desk build, maybe not on the scale that Linus did for his last one, but something that can show off the design aesthetic in a new way?
fractal design Torrent build would be sick with this aesthetic
I like the look you gave when you read the ROG Warning. It's like your mind went blank right after it registered "Really", and then a rush of information came in with "someone actually got paid to come up with that and print it on the board".
no , no guilt, run all the ram! i love watching the overboard builds ! its like watching the cooking channel while eating mac n cheese! go hog wild!!!!!!!!!!!
Hey Jay . This is why i love watching you guys. After that last bit when you said that you are tired and still managed to talk with that passion about parts and builds and ideas. Grate job guys.
I'd vote for a totally custom or heavily modified Jay Case. Then when you go to upgrade you can raffle it off for charity or something, it could become a tradition.
@TheJeep1967
2 жыл бұрын
I second that vote for totally custom or heavily modified case. Make it the perfect case for you, with every feature you would want and the style that you are after for this build.
@Antoshka91d
2 жыл бұрын
Dude a collaboration with DIYPerks would be so awesome!
Thank You Jay , and company !
You don't need thermal pads on the bottom side because there are only memory chips if the ssd is both sided, which don't run hot and doesn't need much cooling, you need cooling for the controller, mostly the temp in the chips is higher because it transfers bit of temp (3-5°c) from controller via transfer mediums (aka heatspreader, thermal pads, etc...)
I like that motherboard. Looks sharp. Another good video Jay. I love this kind of video. You're talking to us as if we are sitting in the room with you. The way friends do when visiting with one another.
Yay! Awesome video. I love the random build discussions almost as much as I love watching Phil’s sick video work montage when it’s all finished 😁
The Raijintek Enyo is a cool looking case. Seems to have large enough “empty” space for you to do some custom modding to it.
@mateuszkwietowicz2470
2 жыл бұрын
Either that or their Eris Evo or even NYX PRO - all great cases from Raijintek.
@chewmanfu
2 жыл бұрын
@@mateuszkwietowicz2470 Oh, the Eris Evo looks so slick! and I think the aesthetic matches perfectly with this motherboard.
@mateuszkwietowicz2470
2 жыл бұрын
@@chewmanfu Agreed, it's a dual system case, but I'm sure Jay could fill it up with multiple rads, pumps and whatnot.
An over-the-top case that you can use that isn't too gun-dam like is the Thermaltake Level 20 XT. It's a good case for an E-ATX motherboard that allows you to install it lying down. And there's a BUNCH of extra space in that case for you to have fun with.
Jay, the m.2 thermal pads are underneath the m.2 aluminum cover plate. When you lifted up the m.2 cover to placed it back onto the motherboard at 12:25 you can see the pads underneath the m.2 cover.
Building with that exact motherboard right now Jay. Didn’t imagine the one thing I wouldn’t be able to get is ram. 12900k and 3090 but can’t even game because no ddr5 lol
@Saskax
2 жыл бұрын
ddr5 are being scalped even more than GPUs right now. Good luck
@matasa7463
2 жыл бұрын
This is why I would recommend people go for DDR4 motherboards for 12th Intel right now. The current DDR5’s are super crappy with loose timings that negate most of the performance gains from the higher frequency, especially since Intel don’t even care much about frequency, but really wants tight timings.
@brannonnorquest1882
2 жыл бұрын
Micro center does have a 12th gen ddr4 compatible board by aorus, if you wanna cough up 250$ and just use ddr4 for a while, nothings optimized for ddr5 atm anyway
@FreightTrain22
2 жыл бұрын
@@matasa7463 Yeah but then you’re stuck with ddr4 which is already at its best. I can always upgrade to better ddr5 ram in the future
@xtakuanx
2 жыл бұрын
Bruh y’all must have it goooooooooood. Jelly of your build
New gen, New case! Enjoy the shopping! By the way; mentioning PCI-E lane sharing is exactly the kind of knowledge that makes me watch all your videos .
It took me ten month to find the specific model of SLI bridge I was looking for in 2021. I had to buy two with one being used as a donor for its exterior face panel in my build's colorway.
you could build a new computer every day for the next year and I will watch, waiting for a overkill rig liquid cooled by hater tears with quad "sli" 3090s just because u can
Keep going bro🙏🏻love the vids
I like that you explained the reasons for the parts you chose. As for the excessive RAM, well, it does look really cool.
I think this is the perfect board etc to stick in an old beige server tower case - paint the inside black to make it look new inside, cut a case window in it, but leave the outside old
This is the added info we all need, along with the same content and personality We all have come to love from Jay. Be well. Thanks JTC.
Keep making build videos Jay, Don’t let these poor peasants tell you how to run your channel .
@Combatpzman
2 жыл бұрын
Don’t have to be rich to enjoy watching a good build. Whiny people whine, they did before prices inflated too. No point in worrying about it.
@absolutegenius111
2 жыл бұрын
Agreed
@SDChargers93
2 жыл бұрын
@@Combatpzman exactly!!!
@mintavious
2 жыл бұрын
I highly agree people are very entitled. If you dont like the fucking content than unsub and leave i never understood these bozos sticking around to whine like babies
@Hexxagone850
2 жыл бұрын
People that cant afford a 3060 complaining that 3080s are out of stock
the board with just the ram alone looks SOOOO good.
The humor is one of the reasons I like this channel: that ending!
Build you own case from scratch.
Yes do the 128GBs of RAM! Damn that looks so sexy. Screw feeling guilty, you earned that hardware. Case wise, maybe try the Fractal Torrent case! It's already black and silver.
@Polyh3dron
2 жыл бұрын
The Torrent isn't great for radiator mounting and water cooling in general. But if I was to do an air cooled build, that'd be at the top of my list. We all know Jay won't be doing that though.
+1 for dual cards watercooled, it's such a nice look! Just leave SLI off if it causes problems.
Don’t feel bad brother, if I had even two of those sticks I’d post them proudly. 4, you’ve been blessed man. Guilty is if y’all stole them, but y’all are blessing us with such a beautiful build. I ordered some open crus. DDR5s just to get the build started until this shortage passes us buy and I can buy the actual ram I wanted without paying scalper prices.
Would love to see SLI again. Was running twin 1070’s until I got my hands on my 3080 a month ago. Most of the issues for non-supported games can be solved in Nvidia control panel by setting per game rendering mode to single GPU if you have issues. More overkill, more better! And yes, that means I wanna see 4 DIMMs too.
I designed the ultimate gaming rig it looks like a $30,000 electronic bride from Japan with a monitor built into her back
That would look great in a Fractal Torrent. And you could really go crazy with your radiators in that case.
@Silver1080P
2 жыл бұрын
It would look good but I'm not entirely sure if it's what he's looking for
The timing on this video is great, as I'm planning my rig atm
Can't wait to see the end of this build. It'd be cool if you made a warship one. Are you still playing phasmophobia especially with the new update for Christmas coming out? Hope you guys are doing great Keep On Keepin On
Inwin 925 still one of the best cases ive ever seen. Too bad its not avaiable anymore..
@filipkotlik3288
2 жыл бұрын
It stil is. I just got mine this week.
Can’t wait to see this come together. Exciting stuff
I have a question. I'm in my 'dust-off-the-knowledge' phase, and reviewing y'all's vids, and here you discuss possible lane-saturation problems with SLI & m.2, and uncertainty if both drives would use the same lane with the dimm.2. So my main question is why not do your C drive in the dimm.2, and your D drive in the m.2, since you seemingly won't be using the 2nd PCIe slot for anything? I imagine accessibility could be an issue, but it seems like that would maximize the throughput..?
Congrats to everyone who's early and reads this comment 🏆
@hashimsalameh2723
2 жыл бұрын
Just realized how new the vid is
Don't know how new they are but I believe the Thermaltake Core P7 cases are still available and are pretty unique looking as they are kind of a hybrid between a case and a test bench on crack. You just have to not want to put anything on top of your case since there is no top panel. Nor front, rear, or bottom panels. Just the 2 sides (one being a tempered glass panel)
Yeah this is what I wanna see. So i can copy for my build when I get the chance.
I love the fact that the board has the 24 pins and others coming out the side
Thanks for the video on a new build. Time to start the long research period leading up to my new build in a couple of years.
doing justice for yourself! Have lots of fun on this one, big man Jay!
Don't feel guilty someone needs to enjoy it so we can live victoriously through them.
We love your Unnecessary Overkill, and your overkill Watercooling, so I'd love to see two GPUs and a loop on everything.
Custom Case! Time to spoil yourself and have a complete Jayz2Cents pc like the Terry Crews build
LIAN LI O11 Dynamic XL - the black version. Its one of the sleekest cases on the market with subtle / not over the top RGB and will give you a super clean presentation for the chrome on black you are going for + god tier cooling options
Love these over-the-top builds.
4 dims for sure!! this is going to be a stunning build!
it looks so good...and I agree with people in the comments saying a full custom Jay case ..like from scratch
My build runs an ASUS ROG Crosshair VIII Impact, and this Maximus Extreme board just looks like it takes everything that the Impact did so well and brings it up to the next level! Like that simply looks incredible!
M.2_1 shares bandwidth with PCIEX16(G5)_2. When M.2_1 is enabled, PCIEX16(G5)_2 will be disabled. I think what you read is for that M.2 one slot sitting under the instruction label you read. You have to unscrew that cover to get to it. Those 2nd and 3rd M.2 doesn't share lanes, But that first M.2 under the box cover does. You called those M.2 1 and 2 , but it is 2 and 3 what you mean. 11:50
I hope that you repeat this for 2022! with everything that did and will be coming out! Great Show!
Hey Jay, just gotta call out one thing. The actual difference between the P5 and P5 Plus drives is that the Plus is the PCIe Gen 4 drive. the P5 is just their top end TLC NAND PCIe Gen 3 drive. I'm sure someone else pointed this out as well, but I didn't see it up high.
I remember what this used to be like. 1) Make a list of parts you want. 2) Plan build for airflow and wiring. 3) Buy the parts listed...in... Doh!
Love this, keep pushing forward. Case suggestion: maybe build one. I want to build a case out of wood and stain it. Over the years people have done this before with mixed results but when it's done right...it's a showstopper.
Jay on this build - I would install the overkill option of dual gfx cards for 2 reasons, one not for gaming but for the OBS and two because you can and its unreasonable, as your personal modern gaming rig you should go to the max to continue where you left off with Skunkworks. I would however consider the lesser option of dual not quad RAM sticks, then look into the Dimm.2 options available to try and find a close to matching option for the corsair ram, thus creating more of spaced the fin design seen in your VRM coolers. it might provide a more aesthetic option also removing the bottleneck to your PCI lanes
Like these videos as well. It great to see someone that knows what they are doing puzzling a build together what's working ,what's not,pros,cons. Some reason I see this build in the seasoning case. Going to be a fun watch.
for the case, i dont have a model in mind, but i want to see that coliseum theme continue, with the next 'level' being the graphic card, and radiators. im picturing a horizontal open air/ removed side panel case
I appreciate you explaining the compoents used
Love the clean look of the SilverStone ALTA F1 case!
Fractal...I know how much you love those cases
GO WITH THE TORRENT!!! It's gonna look just sooooo good!!!
I'm very excited to see this build, I'm a big fan of neutral black and grey tones to then have color accents be lights and have more flexibility there. Please keep building PC I need all the PC x rated content I can see hahaha
You pay so much attention to the aesthetic. I just bought the cheapest option for each specific component I wanted. I didn't care if it was matte black or silver or covered in rgb, if it performed how I wanted and was cheaper it's what I bought.
SLI is NOT dead Jay. There are those of us who bought pairs of high end cards before Covid that have not been ably to buy anything else since. The two GTX 1080s I am running in SLI now still do great even on the ROG Strix X570--E Gaming board I am running now. I've never understood why folks don't think SLI is better than a single card when it comes to the older tech. It makes a HUGE difference. I currently have three SLI rigs running in my house now and even with the original i7 965 CPU on the rig in the bedroom (two 4 gig GTX 680s) they play everything we want to at 1080 just fine. I have another six core i7 (can't remember which one I think it was a socket 2011) running a pair of GTX 980s that clicks along pretty good also. I think Nvidia has put themselves into a position to where their flagship cards are just now exceeding what their older tech could do when run in SLI. Kind of sounds like something Intel would do. I kind of relate this to the cry of "Optical media is dead". I back up to blu ray discs all the time for stuff I want to archive because when bought in bulk single layer blu ray discs are less than $1 each. $1 is pretty cheap for 25 gigs of backup space. Anyhow thanks a lot for continuing to do what you do we all appreciate it.
*Thank you for this content.* This is more of what is helpful to me and the members of my Discord. This information is especially helpful as the technology changes and new/different choices emerge. Your explanation as to why you made these choices in a way that the processes can stick for future use is most helpful. Educational. That this is focused on sustainable hours long gaming vs and extreme build for one time max - make this meaningful and usable. I will point out though that in the world of Study-Level Flight Simulation in VR (such as DCS in hi-resolution VR ) there is no such thing as overkill with technology horsepower. We use all that is available in CPU/GPU/MB Tuning and Cooling.
Jay don't know if you have a 3090 kingpin still, but if you could get your hands on an optimus cerakote waterblock in time then that would be an insanely cool aesthetic and potentially overkill enough without the SLI. Oh, I also just found out about the bykski granzon line, and those fittings would match so well here.
I think it would be cool to go with an old school case for this build and mod the case. Something like the AZZA Hurrican 2000 from 2010, which is huge and distinctive, and came with 4x 230mm fans & 4x 120mm fans. I love the case mod videos, but would love to see a case mod for an older case. And I'm not just saying that because I have an old AZZA Hurrican in my basement that I don't know what to do with...
Yeah, people have called me crazy for using crucial P5 drives, but I've had mine for several years and still solid. You also can't beat crucial's warranty and service.
I can hear your guiltiness from your voice. So excited, but still so much hard feelings. DW We love you.
You need to go water cooling on everything, no air. Watching your videos encouraged me to spend money on a custom loop. We are in this together now, Jay. Plus it will look cool. 😆
For a case how about seeing if you can get semi retro with the Silverstone Viper case. Rounded corners and a solid water cooling attachment deck, plus good fan mounting.