Designing, Cutting, & Shaping the Body & Headstock Ep1 | Making a Custom Bass Guitar from Scratch
Тәжірибелік нұсқаулар және стиль
#bassguitar #guitardesign #custombass #luthier #guitarbuilder
Welcome to Crimson Guitars kzread.info... and Ben's home workshop. In this video series, Ben is building a custom single cut Bass Guitar from scratch and it was filmed in front of a Livestream audience on the Crimson Guitars EXTRAS Channel.
/ crimsonguitarsextras
Chapters:
0:00 Introduction & What will Ben be building today?
0:49 A rundown of the parts and materials
1:50 Customising the neck/headstock shape
2:53 Routing the Truss rod channel
5:43 This episode has been sponsored by Skillshare
7:13 Redesigning a derivative headstock shape
9:25 Cutting out the neck on the bandsaw
10:52 Finessing the shape on the router table
14:06 Gluing on the fretboard
16:28 Designing the custom body shape
21:39 To the bandsaw - cutting out the body
22:45 Refining the curves on the spindle & belt Sander
23:47 Drilling & Routing the pickup and neck cavities
26:29 Back to the neck, cleaning up the edges & hand planeing the radius
29:35 Marking & Cutting the fret slots
32:14 Customising the Truss Rod Access Hole
34:35 Inserting the side dots & Making them Glow-in-the-Dark
38:41 Conclusion & what's happening next time
Check out our new Discord server for Guitar Building Goodness here / discord
Join this channel to get access to the perks:
/ @crimsoncustomguitars and don't forget the Luthiers Question Time Podcast, available on all good platforms or through this link luthiersquestiontime.buzzspro...
Ben's livestream camera setup includes: the Blackmagic ATEM Mini Pro, Prime Cameras (Front facing and over bench) Canon EOS 250D, suspended from the ceiling (bench side) Canon EOS 90D, and on the movable tripod a Canon M6 Mark II
www.cameracentreuk.com/crimson
Music used in this video from Epidemic Sound - www.epidemicsound.com/referra...
___________________________________________________________________________________
We'd like to thank our partners for helping to make this video series possible.
Triton Tools - www.tritontools.com/en-GB
ISOtunes Bluetooth Hearing Protection - bit.ly/36YmKro
Wagner Meters - www.wagnermeters.com/
Leatherman - www.leatherman.co.uk/
Workshop Heaven - www.workshopheaven.com/
Support us by supporting our Partners, and at the same time get yourself a great deal with ISOtunes. Use code "CRIMSON10" for 10% OFF with this link: bit.ly/36YmKro
___________________________________________________________________________________
WEBSITE: www.crimsonguitars.com
VINTAGE TOOL SHOP: bit.ly/3oA8uQK
Luthier’s Tools & Supplies: bit.ly/LuthTools
Guitar Building Courses: bit.ly/LuthierySchool
Kit Guitars: bit.ly/KitGuitars
EXTRAS channel: bit.ly/3gQmul1
SOCIAL
Instagram - / crimsonguitars
Facebook - / crimsoncustomguitars
Patreon - / crimsonguitars
OTHER
Ben's Vintage Tool Shop - vintagetoolshop.com/
___________________________________________________________________________________
Thank you again for all your support, we really, really appreciate it! - Ben
Stay tuned and stay awesome!
___________________________________________________________________________________
Пікірлер: 293
The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/crimsoncustomguitars07221
@PaulCooksStuff
2 жыл бұрын
@Christie Malry Audiobooksmastering your craft is knowing the cut-off point at which you need to make decisions. That is thinking it through.
The idea with the glow-in-the-dark "frets" sounds intriguing...
@GerasimosHandmadeGuitars
2 жыл бұрын
Indeed!should look amazing
21:27 "this might evolve" is like Ben saying "this is a one day build"🤣 but that's half the reason I love watching him.
Just so you know. I fell in love with this bass when you pulled out the body wood. I saw your vision Ben and it wasn’t until the finish went on before others saw what I did. Yes watching this series again.
@CrimsonCustomGuitars
2 жыл бұрын
Thank you Lisa :)
@Forest_Fifer
2 жыл бұрын
Have you bought your tickets yet or are you just relying on the winner to donate it to you?
@LisaHarsh
2 жыл бұрын
@@Forest_Fifer I bought all I could afford first day. Unfortunately not enough tickets but yes I did.
I know I’m a year late, but I absolutely love the love and care you put into this bass. And the p-bass you did a few years ago.
@CrimsonCustomGuitars
14 күн бұрын
Thank you. Never too late for kind words
Teletha's "Challenge accepted" smile just melts me.
I'm still crying because I loved it in its stark, ghostly spectre natural form. It was so beautiful like that. That wood was so clear and white, almost bluish white. I loved that.
I love the wood for the body, it looks beautiful with the dark parts, matches the fret board perfectly....very nice. Oh & to answer your question...I saw a Beaver! Loving this build already
Love the bass design and the change in the wood color on fretboard. Coming along guite nicely Ben. Can't wait to see it when it's completely done.
Finally a bass
This build is already amazing. I'm loving it, and I need to get back into the live streams. Fretless/Glow Frets sounds so very cool, though I would want a completely black fretboard to enhance the glow.
Nice change of pace in the background music - love it!
It's amazing how subtle changes to an existing shape can look so radically different. It looks great so far. Can't wait to see how that body comes out with some carving and a finish applied.
Don't know why people are doubting the design, it's easily one of my favourites I've seen and really suits that gorgeous wood!! And the fact it's a design for a bass delights me as a bassist!
@transcendkira
2 жыл бұрын
Again this channel has me wishing I could design and build guitars. I've always wanted to start but there are many barriers lol. You just do such amazing work.
@CrimsonCustomGuitars
2 жыл бұрын
Thank you so much. This means a lot coming from a Bassist.
At last! Another bass!! When was the last time we saw a bass in a Crimson video? Can't wait to see how this turns out!!
That headstock has major ESP custom shop vibe. Love the shape, great combo of old and new stuff in the build.
Love the ash body, and would love to see you build it fretless. All your builds are always on point and love watching you massage the wood into art. Keep doing what you do
Been waiting for a bass 😍 I’m getting a Fodera vibe from the body and the headstock is Peavey esque but what I love is it will be unmistakably crimson when it’s finished that piece of Ash is stunning already,love the gold hardware too,can’t wait 🤘
Looks like a Gator between the neck pocket and the pick up cavity really cool build
The blue painters masking tape is all I ever use for the super glue and masking tape trick. 30 guitar builds and not once has a single template slipped. I usually wind up wishing it didnt stick quite as well as it does...
Let's see Ben build a Guitarviol. For that matter, how about an electric violin/viola?
Awesome alliteration with Arnold always applies and adds beyond boundaries because - basically - beautifully choreographed content can catapult the careers of creators deep down to the depths of depravity doused in a deluge of dollars...
@f.b.jeffers0n
2 жыл бұрын
Especially everyone eager enough to eat earnings and follow the feast by frantically farting feces...
I love the shape of this bass! Glow in the dark epoxy in the fret slots could be very cool.
I saw the preview image and all I could think was “awesome, we’re getting the videos of Lisa’s bass!” 😄
@CrimsonCustomGuitars
2 жыл бұрын
lol. absolutely
Ben, thank you for building a bass. I've been waiting since the pbass for a new vid. Please do more.
@CrimsonCustomGuitars
2 жыл бұрын
Will do!
im glad to know im not the only luthier who makes shapes and templates with other guitars as a guideline, and deviate from there until its my own desighn. i once traced an ibanez RG and turned that shape into a great value abasi larada shape that looks alot like the shape oof that bass your making
YES! A bass! Going to beautiful.
Glorious woods...!
A Bass Guitaaaarrr!!! Yeah!!
What a coincidence! I also just started a new build before finishing the previous build.
Definitely keep it fretless with the glow in dark powder. That would be an awesome effect.
Honestly that bridge is gonna be killer!!
I love your vids and I've probably watched every one for about 2 years now. Not quite summed up the confidence to build my own bass yet but soon will. I have made lots of tweaks to my basses including recently moving the single pickup towards the neck adjacent to where it was previously.. Just this 40ish mm positioning made a significant difference to the sound. When you decide on pickup placement, you seem to go by aesthetic rather that sound and I wondered if there was a way around this. Maybe building some sort of jig (a la Leo) and trying out different pickup positions before routing the cavity..
Can’t wait for the rest!
@CrimsonCustomGuitars
2 жыл бұрын
coming soon. This series has been filmed and the bass is finished, just the editing to go. It's giving me some time to work on my workshop extension and the hand tool build :)
I’m absolutely in love with the shape of the body! Like you said it isn’t the standard double cut. I think coloured epoxy for the body (blue for example) would be a nice alternative to glow in the dark.
That body wood texture is pristine, really beautiful! Fretless with glow in the dark seems like a neat idea, maybe experiment with filling some wood cracks with glow in the dark as well?
Utterly, utterly brilliant. Want!
@CrimsonCustomGuitars
2 жыл бұрын
Here's your chance: raffall.com/307428/enter-raffle-to-win-bass-guitar-by-ben-crowe-hosted-by-crimson-guitars
This is shaping up to be one of the coolest builds yet. Deffinitly like the glow fret lines idea and staying fretless I do think it should get a hard epoxy treatment on top to seal it after so you can use round wound strings. I also think doing soap bar style wood pickup covers would be cool but have the pole pieces exposed thru the cover and just add a 2nd quarter pounder p for the bridge position this would look and sound amazing. Also lusithand make a filter based preamp like a Wal that would pair very nicely to this
I like the way the transition between light & dark on the fretboard leads into the shape of the headstock. I'm not filly on board with the single-cut body shape yet, but it's better than some I've seen. Lots more glow in the dark powder please!
"Laboring under the misapprehension that I have a sense of humor" has officially made its way into my vocabulary.
That headstock is giving me some Peavey/Schecter vibes. Really goes well with the body style...I've always been a fan of the headstock design that Fender used for the Performer and Katana guitars and basses that came from Japanese factory in 85-86
Glow in the dark inclusions sounds real cool. Looks good so far.
This is the first single-cut bass shape that I like.
That body is amazing.
I love these guys. Wish I was local so I could visit
Ben, as I said in a previuos comment I'm atonished with your craftmanship. I'm participating in the raffle, because if I win the bass, every time I play it, I will feel like I'm visiting your workshop. There will be also a piece of Crimson Guitars in Argentina.
I think you should go whole-hog with the glow-in-the dark powder. Fret slots, body inclusions, everything. It would look amazing on a dimly lit stage.
"I like starting new projects. I don't seem to be good at finishing old ones" - No Sh!T Ben, I love watching you build guitars, you are incredible, but I would like to see you finish them. It is frustrating not to see an incredible build finished.
@LisaHarsh
2 жыл бұрын
Not only is this finished. It is gorgeous and I really want it. The livestream chat all agreed. That this is my bass. 😁
Yes! More bass content please! :D
@CrimsonCustomGuitars
2 жыл бұрын
will do
Glow in the dark. 👍👍👍
i like the edits of streams, i feel like ben talks more fluidly
That tiny hand drill is amazing
I love your dog trying to get in at 21:48 :D
Nice to see you have your SUB on while in the workshop 😂 Only a Rolex 😀
Which animal I see at 24:29? A capybara 😆
Brilliant.
I really really like the shape of both the body and headstock. I vote glow in the dark fretless and body inclusion fills.
I think this is the first time I've seen you use a vacuum. I use my shop vac all the time. You usually just blow or brush sawdust and shavings out of the way, which means you have to vacuum or sweep them up later. (Plane shavings make the best fire starter.)
From a learning view point, a fretless would have taught us something new. We have seen fret installation many times but setting up a fretless neck is somewhat different. When you first said fretless I thought good, maybe I can learn something. Oh well maybe another time.
@PaulCooksStuff
2 жыл бұрын
Stick with it. Without spoiling too much, lots of things change throughout the build.
OMG!!! Finally a BASS!!!
@CrimsonCustomGuitars
2 жыл бұрын
And more will be forthcoming. I enjoyed this one very mch
Finally! A custom bass.
Hi Ben, Glow in the dark in the body, interesting to watch how will it integrate in the dark parts of the wood and with the finish as well, but not fretless. Take care.
I reckon as much glowy stuff as possible. Maybe even get your hands on Stuart Semple's Lit powder. Probably a contoured set neck? And maybe a piezo and tapewounds if you go fretless.
Just got my tickets
My fretless bass isnt going glow in the dark, but they are colour shift pigment haha so the edges of the frets will be coloured and the centre white, and visa versa depending on how you look at it 😀
Yay a bass finally, fretted and luminous with pj pickups for versatility at a gig and also matches j nut thickness. please don't hide the wonderful colours of natural woods too much aslo would love to see distressed brass effect on hardware and knobs if possible. Brass scratchplateish designy thingie also. Love it.
The design sort of reminds me of Tosin Abasi’s instruments, how the top of the upper bout extends along the neck
the cat is an essential part of the build process
I like this a lot
Was the book Melvyn Hiscock’s “Make Your Own Electric Guitar,” perchance? Great book.
Aye! Lovely
Off topic - Love the Sub, Ben. My personal favourite is the Sub without date... Much more balanced look.
@CrimsonCustomGuitars
2 жыл бұрын
I agree, though the date bubble has really grown on me.. and that is something I really never thought I would say!
Seeing your use of the router table there Ben, I'm in the process of designing my own for guitar building (for those things where my CNC is overkill). I have two routers, and two corresponding inserts with lifts (having both on the table makes it quicker to change between two bit sizes). However, I also want to be able to convert it to an overhead pin router as I think it better for some type of work to see the router bit at work and having the template ride on a pin below. Do you have any pointers on how I should go about that? I have a general idea on how I want the stuff to be laid out, I am not so sure about the pin router addon and how to fix it to the table. Any ideas on that?
@lucemiserlohn
2 жыл бұрын
I just put that question in the queue for the livestream via Discord, but if anybody else has an idea on how to approach this, any pointers are welcome!
I like the idea of the glow-in-the-dark powder in the inclusions...
Why am i getting Bill Bailey vibes?! 😜😂😎🇬🇧 Nice work
If you put glow in the dark epoxy on the holes in the body, fill some of the frets holes with that too, it would maybe looks kinda good I think
Hey Ben. Great content as ever. How about doing a build with Talitha?
I would like to see glue in the dark frets as well as filling voids in the body.
Fretless with glow-in-the-dark fretlines wiuld be cool 😎
With automotive sheet metal you would start at one side and move across to the other. Automotive cylinder heads are tightened from the center outward but in stages.👍
@CrimsonCustomGuitars
2 жыл бұрын
Thanks for the tips!
HEY BEN ! 😆 sorry for yelling 😁 I have a block of Kauri and want to build a Tele Style.. The issue I have is that my template is 20mm to long if placed going with the grain but fits well if placed so the grain runs vertically.. Any suggestions? Love this buid by the way 👌
Ah - @Lisa Harshberger’s Capybara bass!
Hi, Just a quick question: i built my own bass quite a few years ago and miscalculated the length between the bridge and the first fret! beginners mistake oops. The result was the lower end of the bridge hangs over the end of my body greetings Olly oh love your YT channel btw
For a fretless bass I would also have a pickup closer to the bridge. Pickups in the "P" position don't really emaphasise that high midrange that really makes a fretless sing. What sort of finish are you considering for the board? If you're going for polished look then a polyester coating looks stunning and will protect the board.
@jamesonpace726
2 жыл бұрын
Gee, good thing you educated the expert luthier....
@joninawhitecoat
2 жыл бұрын
@@jamesonpace726 I'm not sure what part of my comment you thought was criticism. Recommendations as I've played fretless basses for a number of years. The recommendations that Ben asks for in most of his build videos.
@Forest_Fifer
2 жыл бұрын
Spoilers.....
I'd say bolt-on neck, and use Dan Thompson's (of Guns and Guitars) signature angled support screws at the heel joint. (Since he is in GGBO this year as well as last year)
Beautiful piece of ash. Not seeing ash as much in the US these days as we used to; the emerald boring beetles have really done a number on it. I lost 3 beautiful ash trees in my yard to them back in 2016. 33:45 I want to see Ben do a chainsaw guitar build! Personally, I'm all about fretless bases.
@CrimsonCustomGuitars
2 жыл бұрын
Sorry about your trees. Unfortunately, Mrs Bun won't let Ben anywhere near a chainsaw...
@jimmypenrose1401
2 жыл бұрын
@@CrimsonCustomGuitars The day that you are NOT duly terrified of a chainsaw or a table saw is the day you should never go near one.
I feel like whether it is fretted or fretless would depend on if it's going to be a giveaway or auction or something like that. Most players prefer a fretted instrument since it's overall more versatile in terms of tone and player skill level. I do think filling in the voids with something cool (glow in the dark or not) would be a nice touch.
@CrimsonCustomGuitars
2 жыл бұрын
I've said in the raffle that if the winner wants I would be happy to install frets.. no worries
Capybara shaped bass. 🤘
Ben Beautiful Rolex Submariner, I can’t wait for your watch themed guitar build👍👍🎸🎹🎼👨🏻🦯👨🏻🦯
@CrimsonCustomGuitars
2 жыл бұрын
thank you! And me too.. the watch build will be following the completion of the hand tool build.. so, soon?ish?? lol
Build a kora next. Failing that, how about a National Steel style slide guitar, or just a dobro?
Hi Ben you need to stop your bench wobbling 😂 great video as always. I should remember to cut the truss rod channel while I have a straight side, always forget.🤔 cheers Dave
How thick will the body be? I missed it in the video. Thxs
I like the body wood. It ressembles cork, viewed under magnifying glass. Very unusual. For a fretless perhaps a piezo may be a good idea with a mix/balance pot to blend in the magnetic pickup. A piezo may bring some "woodiness" and full-range sound to complement the otherwise mid heavy Precision . Also the bass will stay visually simple and uncluttered.
@CrimsonCustomGuitars
2 жыл бұрын
Cool idea, thanks
Where do you get your templates? How do I get started as an established woodworker?
I see a dog or a bear in the dark patterns ,the eyes I see are where I imagine the bridge will go.
I wonder if grain-filling the ash body with glow-in-the-dark powder mixed with epoxy is something worth considering. I don't think I've ever seen that done, and in my head...it looks pretty dang cool :)
The glow in the dark stuff sounds really cool, and I'd like to see it. Have to say though, my personal opinion, I don't like it for this guitar (bass). Truth is I love the natural pattern of the body and fret board, and somehow the glow in the dark stuff would kind of ruin the natural beauty of it. I'd also like to see this fretless, because of the pattern of the fretboard (frets would get in the way of that, and I'd love to see it all). Just what I think. You do you! Looking forward to the next episode of this build!
Hurley Gurley. Nice
Crazy beautiful that wood is. Nice shape going! I'd like to see you go nuttier on the contour and bevel carving.
Would definite put something in the inclusions, glow in the dark or something with metallic pearl epoxy...won't matter what you use everything you build looks awesome...