Designing and Installing a Fire Suppression System for the K24 Swapped CRX

Автокөліктер мен көлік құралдары

Designing and Installing a Fire Suppression System
By Aaron Gaghagen and Brian Gillespie
Car fires happen. We have all seen the viral videos of cars going up in flames. A lot of the time it's somebody's project car or race car burning on the side of the road. Pushing the performance of a car can be hard on the components. These components can fail, possibly leading to fire. Many people choose to use small fire extinguishers mounted in the driver area. While they are effective, they do have their limitations. They cannot hit more than one area at a time and they require the driver or safety crew to operate them. These limitations are too much for our friend Vic and his K24 swapped AF CR-X.
Vic chose a complete fire suppression system from Lifeline. It uses a liquid clean agent extinguishant that will put out the fire, but not leave residue that could ruin surviving electrical components and interior pieces. We show how to design and install the system.
www.wdlracing.com/products/li...
Like us? We’d Love Your Support!
Help Support VTEC Academy by hitting up our store for gear at vtec.academy/shop/ or help us by sharing (it’s free!) this post or others with other cool Honda people.
You can find killer deals on stuff we actually use here on our Amazon Page at www.amazon.com/shop/vtec.academy. Items you buy using the link will give us a small kickback and help us bring you more Honda and Acura projects!
You can also help support VTEC Academy by shopping for your Acuity Instruments parts using our link at acuityinstruments.com/?ref=vt...
Nothing but Hondas. That’s exactly what you’ll find at VTEC Academy. Because Soichiro Honda’s passion for motorsports and his company’s ability to express that in the machines they produce make a whole lot of sense. VTEC Academy is a place for Honda fans who feel the same way and who seek the most accurate technical information and commentary to continue that very legacy and make whatever Honda it is that they drive just a little bit better. And more fun.
The editors and contributors of VTEC Academy are some of the industry’s most experienced and trusted, which means the informative, unique perspectives you need are all right here. And, like you, we’re also obsessed with Hondas. So, subscribe to our channel and hit us up at vtecacademy.com or, if you’re into social media, you can get your daily dose of VTEC Academy on Instagram, Facebook, and Twitter. We’re always on the lookout for cool, fast Hondas.
DISCLAIMER:
VTEC Academy videos are for educational and entertainment purposes. We can not guarantee the modifications performed in the video are legal in your locality. Do not do any modifications to your vehicle that will void your warranty or in any way violate your local laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk. It's on you, dog.

Пікірлер: 22

  • @danielhildebrand5717
    @danielhildebrand57174 ай бұрын

    I love this build, own a gen1 crx and can’t wait for my engine to explode to have an excuse to swap one in.

  • @VTECAcademy

    @VTECAcademy

    4 ай бұрын

    Just do it! When you get it up and running you will be so much more satisfied. The K24 really transformed the CR-X.

  • @1stGenCRXs

    @1stGenCRXs

    4 ай бұрын

    @@VTECAcademyit sure did and you can pull it an sell the EW. Possibly help offset the cost

  • @j_mm1084
    @j_mm10844 ай бұрын

    Great episode! makes me want to install one in the ek 👍

  • @VTECAcademy

    @VTECAcademy

    3 ай бұрын

    You should! It could save big headaches in the future.

  • @jeremyjohn1954
    @jeremyjohn19543 ай бұрын

    So if the car flips over the fire suppression gas is not going to work at all?

  • @rocky_top_deluxe
    @rocky_top_deluxe4 ай бұрын

    Yes !!!

  • @VTECAcademy

    @VTECAcademy

    4 ай бұрын

    🎉🎉 Let’s go!

  • @desmomotodesmomoto2033
    @desmomotodesmomoto20334 ай бұрын

    you guys would like the K997 project engine swap. He is in Toronto supplying the kit too. 997 + K24 = K997

  • @VTECAcademy

    @VTECAcademy

    3 ай бұрын

    Hell yeah! K swap the world! Also, we love pissing off Porsche people.

  • @earlturner6023
    @earlturner60234 ай бұрын

    I want to k swap my ef sedan so bad! Can't decide on 20 or 24 though...

  • @1stGenCRXs

    @1stGenCRXs

    4 ай бұрын

    K20 if you love the high revs, k24 if you want it to pull like a freight train! 😂

  • @VTECAcademy

    @VTECAcademy

    3 ай бұрын

    Can't go wrong with either. Just think of your end goal and choose accordingly.

  • @VTECAcademy

    @VTECAcademy

    3 ай бұрын

    Choo choooo!!!!

  • @bgyhikopluhgh1335
    @bgyhikopluhgh13353 ай бұрын

    hello, does anyone know the 8th gen civic r18 supercharger will fit in my 9th gen r18? they should be, is my guess... but how much mod(if any) will need to get this done? has anyone done this? thinking about using kraftwerks... thanks for any info!!!

  • @VTECAcademy

    @VTECAcademy

    3 ай бұрын

    Have you tried contacting Kraftwerks? They should be able to tell you the difference if any.

  • @bgyhikopluhgh1335

    @bgyhikopluhgh1335

    3 ай бұрын

    thanks for the reply... i did contact them... they no longer carry for 9th gen r18 super chargers... no demand for them... they did give me a contact for this guy in russia... not too keen on sending money overseas...

  • @popcola1462
    @popcola14624 ай бұрын

    Can a manual transmission from a k20c2 bolt up to a k24a2?

  • @averyalexander2303

    @averyalexander2303

    4 ай бұрын

    No, at least not without a custom adaptor plate. I'm curious why you are looking to do that though?

  • @popcola1462

    @popcola1462

    4 ай бұрын

    @averyalexander2303 I work in a junkyard and a civil came in with the engine and transmission. But a lot of parts are off the k20c2. I have a k24a2 I've been holding to kswap my del sol. So I was hoping the transmission bolted up. And thank you for answering

  • @averyalexander2303

    @averyalexander2303

    4 ай бұрын

    ​@@popcola1462 Makes sense. And I know the struggle of trying to find a K series 6 speed, it took me a couple years. I eventually found an 04 RSX-S 6 speed trans on Facebook Marketplace listed for $1K and after driving over 3 hours to go look at it, I found that the diff was badly rusted where the axles go in. The guy got sketched out and sold it to me for $800 and it fortunately works great. I later opened it to replace the diff with an OEM LSD and swap in taller 5th and 6th gears and somehow nothing else inside was rusty, so I'm not sure what happened to the diff but it worked out alright in the end.

  • @VTECAcademy

    @VTECAcademy

    4 ай бұрын

    Not just adapter plate but clutch and flywheel too.

Келесі