unbelievable work. I looked your video like a movie.

thank you

Thank you very much, the tutorials have helped me a lot, i sent my mail to you

@johnhsu5773

Жыл бұрын

Welcome to subscribe to my channel. I have sent you the simulation file that you want.

hi, jonh. Thanks for your help. I want to analyse torque of this generator as a motor by using 3phase current. Is the process same with this video? Do I should give current instead of voltage?

@johnhsu5773

Жыл бұрын

I use three-phase voltage when I want to drive the motor in the simulation software. In fact, as long as we understand the principle of the motor and we clearly know what we want to calculate? We can set voltage drive or current drive on the simulation software.

you should add more magnets in between the gaps of the nig N S magnets, as to create a halbach array, biasing the field density towards the coil!

@johnhsu5773

Жыл бұрын

Thanks for your advice. That is really a good way to enhance the performance of the generator. Maybe it can be the theme of my next film. However, the amount of magnets will be more, the price of magnets will be expensive, and it is not easy to place the solid Halbach array magnets.

Congratulations on a successful work, the situation I do not understand, how did you create the N and S poles of the magnets, these selections are ready, but how will we create them, help please

@abhijithudayan7456

Жыл бұрын

U can use relative cordinates system to assign direction of magnetic flux lines

hi can i get the ansys file for personal study purposes?

Good day John, thankyou for sharing your knowledge for AFPMG, i would highly appreciate it if you can also share the ansys file for reference? I have sent you an email aswell, thanks.

Nice!!!!! I have a doubt, when I'm going to assign ORIENTATION in the magnets, It does'nt appear N o S, only appear "Global" and "Not assigned"... How can I fixed??? Is the same .step file. THANKS. Your videos are very helpfull

@johnhsu5773

Жыл бұрын

Hello, welcome to subscribe to the channel. Please send a letter to my mail and I will send you what you need.

Hi John. I appreciate your work. May I please have your Ansys and CAD files for reference? Thanks

@johnhsu5773

Жыл бұрын

Yes, Please send me a message to my mail and I will give you that. Contact email : johnhsu4088@gmail.com

Mr.Jhon , Thanks for the video. It will be helpful if u send me the step file. I am doing research in AFPM Generator.

@johnhsu5773

Жыл бұрын

Hello, You can E-mail me for our detailed discussion, or I can send the simulation file to you for your detailed study.

Hi Sir. I appreciate your job. Could I get your Ansys file for reference? It's beneficial for me to study the Ansys Maxwell and Motor design. I appreciate any help you can provide. Best regards.

@johnhsu5773

Жыл бұрын

Yes, you have sent me a letter. I have sent you the simulation file you want.

@ngocvuvo0127

Жыл бұрын

@@johnhsu5773 Thank you so much for your help, Sir.

Hello sir I am making a generator. 25 mm diameter and 5 mm width neudynuim magnet 16 magnets on one rotator Diameter of rotator is 22 cm What will the size of wire ??? Which gauge copper wire is the best for my generator???

@johnhsu5773

10 ай бұрын

Generally, the size specifications of the coil are determined based on the rated current of the generator. For detailed performance, you can refer to the specification sheet when purchasing the coil winding assembly. A larger diameter or higher quality of the coil can handle higher current and heat.

sir hello ı have a few questions how ı can contact you ı got a problem ı cannot set the magnet direction (S&N)

@johnhsu5773

3 ай бұрын

You can refer to the video in this link, and you will easily learn it. www.johnseniormotordesignandmagneticcircuitanalysisengineer.com/setting-the-magnet-magnetizatio

Hi John, it's really interesting, and could you pls send me a copy of the CAD model? Thank you very much!

@johnhsu5773

Жыл бұрын

That's OK. You send a message to my E-mail, and I will send you what you want. Contact email : johnhsu4088@gmail.com

From where you got the "imported" file? How did you make the model?

@johnhsu5773

Ай бұрын

You can draw on the drawing interface in Ansys Maxwell by yourself.

@mmsti7867

Ай бұрын

For this type of design, I need to design only the coils and set their materials. After designing the coil, I just need to add magnet above it, right?

@mmsti7867

Ай бұрын

Do I need to add any other materials in it’s stator?

@johnhsu5773

Ай бұрын

@@mmsti7867 ,you need to place many poles of magnets on the rotor and let it rotate. The magnetic field lines need to cut through the coil winding.

Mr Jhon thanks a lot for sharing us your knowledge. I will be glad if you can share me your model. I will send you an email.

@johnhsu5773

Жыл бұрын

Welcome to subscribe to my channel. I have sent you the simulation file you want.

hi sir, kindly share the cad model plz... I sent a mail also

@johnhsu5773

Жыл бұрын

Hi~, I have already sent you what you want. I'm glad that you appreciate my work.

@dineshkumarelango6422

Жыл бұрын

@@johnhsu5773 Thank You So much 🙂

HI Sir Very nice video , I sent you an email, will you be able to send me the CAD and Ansys model for this motor of the above example please.

@johnhsu5773

Жыл бұрын

I have already sent it to you. Wishing you success in your studies.

Thank you sir for the video. Please send me the CAD model , I have sent u the mail.

@johnhsu5773

Жыл бұрын

Welcome to subscribe to my channel. I have sent you the simulation file that you want.

Hi John, I've sent you an email asking for a copy of your CAD file too. Can you kindly send it to me please? Thank you so much, Ben

@johnhsu5773

Жыл бұрын

Ok, welcome to subscribe to this channel. I will send you what you want.

Dear John , i like your model, is it possible for you to share your model with me as well? i sent my mail to you

@johnhsu5773

Жыл бұрын

Hi~, I have already sent you what you want.

@unalsevim5149

Жыл бұрын

@@johnhsu5773 thank you so much indeed🙂🙋‍♂

HI Sir Very nice video , I sent you an email, will you be able to send me the CAD and Ansys model of the above example please.

@johnhsu5773

Жыл бұрын

Welcome to subscribe to my channel. I have sent it to you. I hope you will like it.

20 volts at 500 rpm...DUUDE...(something is really OFF) coil size , wire diameter -turns...phase connection...(star-delta)

I am sure you have never heard of an induction motor. Or have you? My PCB motor uses induction and NO magnets at all and it's even thinner than your design.

@johnhsu5773

2 ай бұрын

This is a radial flux induction motor. If you are interested in studying axial flux induction motors, I think it is also a feasible new design. kzread.info/dash/bejne/X3aewZOdYpieXdI.html

Congratulations on a successful work, the situation I do not understand, how did you create the N and S poles of the magnets, these selections are ready, but how will we create them, help please

@johnhsu5773

Жыл бұрын

Hi, welcome to subscribe my channel, we can discuss your questions by e-mail. Contact email : johnhsu4088@gmail.com